Effect of heat treatment on the temperature dependence of the fracture behavior of X-750 alloy
Source abstract
Abstract
Abstract X-750 is a nickel-chromium based super alloy of usefulness in a wide variety of applications such as gas turbines, rocket engines, nuclear reactors, pressure vessels, tooling, and aircraft structures. Its good mechanical properties are due to the strengthening from precipitation of γ′ particles upon prior ageing heat treatment. In this work, the effect of such heat treatment on the fracture mechanisms of X-750 was studied at various temperatures by comparing it with a non-aged, solution annealed X-750. Tensile tests were conducted from room temperatures up to 900 °C; fracture surfaces were analyzed by means of SEM observations. In addition, the microstructure of both aged and solution annealed materials were studied using SEM and TEM, both on as received and on tested specimens. In terms of mechanical properties, as expected, the yield strength and the ultimate tensile strength of the aged material were better than for the solution-annealed one, and only slightly decreased with increasing temperature when tested between room temperatures and 650 °C. In this range of temperature, the fracture surface of aged material evolves from purely intergranular to purely transgranular due to the thermal activation of dislocation mobility that relieves the stress at the grain boundaries, while the rupture of the solution annealed material is due to the coalescence of voids induced by decohesion at the MC carbides/matrix interface. At higher temperatures, precipitation of γ’ particles upon testing of the solution-annealed material leads to a temperature-dependent increase in both yield strength and ultimate tensile strength, which nevertheless remain below the aged material ones with the exception of the higher temperatures. At the same time, an overall decrease of the aged material mechanical properties is observed. Minimum ductility was observed at 750 °C for both solution annealed and aged specimen, due to the oxidation of grain boundaries leading to an environmentally-induced fracture mechanism. At higher temperatures, dynamic recovery and dynamic recrystallization occur which prevents such a rupture mechanism, but finally leads to rupture by grain boundary slipping at 900 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Special Metals, INCONEL Alloy X-750 Data Sheet, 2004.
2. C. Judge, M. Griffiths, L. Walters, M. Wright, G. Bickel, O. Woo, F. Garner, Embrittlement of nickel alloys in a CANDU reactor environment, in: T. Yamamoto (Ed.), Proceedings of the 25th Symposium on Effects of Radiation on Nuclear Materials, ASTM International 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 2013, pp. 19428–2959.10.1520/STP104242 ↗
3. M. Griffiths, F.J. Butcher, I. Ariani, S. Douglas, F.A. Garner, L. Greenwood, Spectral effects on stress relaxation of Inconel X-750 springs in CANDU reactors, in: Proceedings of the 8th International Conference on CANDU Maintenance, 2008.
4. Irradiation-Induced embrittlement of inconel 600 flux detectors in CANDU reactors
5. R. Ballinger, C.S. Elliot, I.S. Hwang, J. Prybylowski, The Effect of Thermal Treatment on the Fracture Properties of Alloy X-750 in Aqueous Environments, 1993.
6. Mechanisms of stress-corrosion cracking of alloy X-750 in high-purity water10.1007/BF02833560 ↗
7. Effect of grain boundary denudation of gamma prime on notch-rupture ductility of Inconel nickel-chromium alloys X-750 and 718
8. Microstructural and environmental effects during creep crack growth in a superalloy
9. Oxidation induced intergranular cracking and Portevin–Le Chatelier effect in nickel base superalloy 71810.1016/S0921-5093(01)01224-2 ↗
10. Effect of temperature on the fatigue-crack propagation behaviour of Inconel X-75010.1111/j.1460-2695.1980.tb01111.x ↗
11. Dix · 1971
12. An APFIM/AEM characterization of alloy X75010.1016/0169-4332(93)90328-9 ↗
13. Tensile behavior of Inconel X750 sheets: effect of heat treatment
14. Mechanical properties of Ni3Al and nickel-base alloys with high volume fraction of γ’
15. The deformation and fracture characteristics of inconel X-750 at room temperature and elevated temperatures10.1007/BF02654718 ↗
16. Bauschinger effect in age-hardened Inconel X-750 alloy10.1016/S0921-5093(01)00933-9 ↗
17. Tensile behavior of inconel alloy X-750 in air and vacuum at elevated temperatures10.1007/BF02666359 ↗