Deformation behaviour of nano-twinned single crystals of an Fe–19Cr–16Ni austenitic alloy
Source abstract
Abstract
Abstract The deformation behaviour of an Fe–19Cr–16Ni austenitic alloy was studied by micro-tensile testing of small-scale single crystals. A detailed comparison of specimens with and without nano-twins was conducted. The study revealed that the deformation behaviour depends strongly on the crystallographic orientation of the parent crystal and the spacing between nano-twin bundles. Although the yield stress in single crystals without nano-twins was governed by Schmid's law, the slip transfer inhibition by twin boundaries contributed significantly to the strengthening in nano-twinned samples. With the parent crystal oriented favourably for single-slip, the dislocations in the parent crystal glided by cross-slip onto the primary plane in the twinned crystal. For the hard-oriented parent crystal with dense nano-twins, dislocation accumulated and led to necking at an early stage. For the same orientation but with sparse nano-twins, twin growth and nucleation was promoted by dislocation reactions with the twin boundaries. These findings suggest that control of the nano-twin structure can allow the desired deformation behaviour to be tuned.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
2. Ultra-strength materials10.1016/j.pmatsci.2010.04.001 ↗
3. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
4. Tailoring stacking fault energy for high ductility and high strength in ultrafine grained Cu and its alloy10.1063/1.2356310 ↗
5. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗
6. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
7. Intergranular strains and plastic deformation of an austenitic stainless steel10.1016/S0921-5093(01)01799-3 ↗
8. Nanomechanical insights into the deformation behavior of austenitic alloys with different stacking fault energies and austenitic stability10.1016/j.msea.2011.05.068 ↗
9. 316L austenite stainless steels strengthened by means of nano-scale twins10.1016/S1005-0302(10)60048-5 ↗
10. Deformation twinning in nanocrystalline materials10.1016/j.pmatsci.2011.05.001 ↗
11. Detwinning mechanisms for growth twins in face-centered cubic metals10.1016/j.actamat.2009.12.013 ↗
12. Plastic flow stability of nanotwinned Cu foils10.1016/j.ijplas.2009.11.003 ↗
13. Development of ultrahigh strength and high ductility in nanostructured iron alloys with lattice softening and nanotwins10.1016/j.scriptamat.2012.06.019 ↗
14. Deformation twins and related softening behavior in nanocrystalline Cu–30% Zn alloy10.1016/j.actamat.2012.02.036 ↗
15. The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials10.1016/j.actamat.2012.02.026 ↗
16. Strain-rate sensitivity, activation volume and mobile dislocations exhaustion rate in nanocrystalline Cu–11.1at% Al alloy with low stacking fault energy10.1016/j.msea.2014.05.093 ↗
17. Deformation twinning in submicron and micron pillars of twinning-induced plasticity steel10.1016/j.scriptamat.2012.07.023 ↗
18. Existence of two twinning-mediated plastic deformation modes in Au nanowhiskers10.1016/j.actamat.2012.03.018 ↗
19. Quantitative damage and detwinning analysis of nanotwinned copper foil under cyclic loading10.1016/j.actamat.2014.08.021 ↗
20. Dynamic and atomic-scale understanding of the twin thickness effect on dislocation nucleation and propagation activities by in situ bending of Ni nanowires10.1016/j.actamat.2015.02.002 ↗
21. Twinning/detwinning-mediated grain growth and mechanical properties of free-standing nanotwinned Ni foils: grain size and strain rate effects10.1016/j.msea.2015.01.015 ↗
22. Deformation twinning in nanocrystalline Al by molecular dynamics simulation10.1016/S1359-6454(02)00318-X ↗
23. Novel deformation mechanism of twinned nanowires10.1063/1.2204760 ↗
24. Strength in gold nanopillars with nanoscale twins10.1021/nl070959l ↗
25. Effect of surface orientation on the plasticity of small bcc metals10.1016/j.ijplas.2013.03.004 ↗
26. Plasticity in confined dimensions10.1146/annurev-matsci-082908-145409 ↗
27. The temperature dependence of stacking fault energy in Fe-Cr-Ni Alloys10.1007/BF02663341 ↗
28. On the mechanism of twin formation in Fe–Mn–C TWIP steels10.1016/j.actamat.2009.12.032 ↗
29. Deformation of single crystal Hadfield steel by twinning and slip10.1016/S1359-6454(99)00383-3 ↗
30. Mechanical responses of copper bicrystalline micro pillars with Σ3 coherent twin boundaries by uniaxial compression tests10.2320/matertrans.MA201312 ↗
31. Plastic anisotropy and associated deformation mechanisms in nanotwinned metals10.1016/j.actamat.2012.09.052 ↗