The effect of ion irradiation on the tensile and fatigue properties of Ti–6Al–4V alloy
Source abstract
Abstract
The specimens of Ti-6Al-4V alloy were irradiated under the simulated ion beams of hydrogen and nitrogen. The microstructures of the alloy before and after irradiations are characterized by SEM, TEM and XRD. Then the tensile and high cycle fatigue properties were examined on the irradiated and un-irradiated alloys. The results show that the tensile and fatigue properties decrease to a larger degree after irradiation with the hydrogen ions than that with the nitrogen ions. The brittleness induced by the double effects of the fined grains and TiH is the main reason why the mechanical properties decrease for the alloy irradiated with the hydrogen ions. While for the alloy irradiated with the nitrogen ions, the decreasing properties are induced by the single effect of the partly fined grains. Therefore, the irradiation, especially with the hydrogen ions, plays a deleterious role on the properties of the alloy. The mechanisms of irradiation effect on properties are partly same for the alloy irradiated with nitrogen and hydrogen ions. The specimen shows a dyeing effect on the surface of the specimen after irradiation, which has no much influence on the mechanical properties of the alloy. (C) 2010 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Metal and Thin Film Mechanics · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Tobler · ASTM STP · 1976 · 601 · 346
2. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
3. Space environments and induced damage mechanisms in materials10.1016/j.porgcoat.2003.07.003 ↗
4. Single event effects test results and their applications to spacecraft electronics10.2514/2.3658 ↗
5. Effects of radiation on materials
6. Optimization of spacecraft orbit and shielding for radiation dose10.2514/3.26459 ↗
7. 1994
8. Comparison of DMSP and NTS-2 dosimeter measurements with predictions10.2514/3.57737 ↗
9. Analysis of spacecraft anomalies due to the radiation environment10.2514/2.3509 ↗
10. Materials failure in the space environment
11. Low earth simulation and materials characterization10.2514/3.25478 ↗
12. D · 1996
13. Effects of ionizing irradiation and thermal cycling on tensile properties of extruded Mg–Zn–Y–Zr alloys containing quasicrystalline phase10.1016/j.msea.2006.12.014 ↗
14. Wan · 1993
15. Hydrogen as alloying element in titanium, Titanium’80 science and technology
16. Effect of hydrogen on flow and fracture in a beta-titanium alloy
17. Metal-hydride characterization and mechanical properties of Ti–6Al–4V alloy10.3327/jnst.37.144 ↗
18. Hydrogen in Metals, Proceedings of the Second JIM International Symposium
19. Effect of hydrogen on yield of iron10.1016/0036-9748(77)90335-0 ↗
20. Chu · 1988
21. Hydrogen-assisted fatigue crack growth in β-annealed Ti–6Al–4V10.1016/S1359-6462(98)00395-9 ↗
22. Hydrogen-induced subcritical crack growth in Ti–6Al–4V alloy10.1016/S0921-5093(97)00506-6 ↗