Effect of laser surface melting upon the devitrification of plasma sprayed cordierite
Source abstract
Abstract
Abstract Devitrification behavior of plasma sprayed cordierite (2MgO–2Al 2 O 3 –5SiO 2 ) modified by addition of 6.3 wt.% TiO 2 was studied in the as-sprayed condition and after laser surface melting. Laser treatment was performed using a pulsed Nd:YAG laser and the melt depth was maintained within the plasma sprayed coating. Laser surface melting produced a chemically homogeneous glass surface that contained extensive microcracks in both the melted and unmelted portions of the coating. Laser surface melting was found to be effective in reducing porosity and surface roughness. Roughness of the as-sprayed surface was reduced to R a 2.5 μm or better from a roughness of R a 14 μm. Devitrification of as-sprayed cordierite was dependent upon TiO 2 distribution in the coating, whereas crystallization in the laser melted coating was dominated by nucleation at microcracks. Microcrack density was significantly reduced by viscous glass flow and transformation induced volume expansion during devitrification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. J.E. Shelby, Introduction to Glass Science and Technology, The Royal Society of Chemistry, Cambridge, 1997.
2. Ray · Thermochim. Acta · 1996 · 280/281 · 16310.1016/0040-6031(95)02640-1 ↗
3. Chaim · J. Am. Ceram. Soc. · 1992 · 75 · 151210.1111/j.1151-2916.1992.tb04218.x ↗
4. Diaz-Mora · J. Non-Cryst. Solids · 2000 · 273 · 8110.1016/S0022-3093(00)00147-2 ↗
5. N.S. Yuritsin, V.M. Fokin, A.M. Kalinina, V.N. Filipovich, in: M.C. Weinberg (Ed.), Nucleation and Crystallization in Liquids and Glasses, American Ceramic Society, USA, 1993, pp. 379–382.
6. R. Muller, D. Thamm, W. Pannhorst, in: Proceedings of the Sixteenth International Congress on Glass, 1992, pp. 105–110.
7. Okada · J. Mater. Res. · 1998 · 13 · 135110.1557/JMR.1998.0191 ↗
8. Fokin · J. Non-Cryst. Solids · 1999 · 246 · 11510.1016/S0022-3093(99)00007-1 ↗
9. Zdaniewski · J. Mater. Sci. · 1973 · 8 · 19210.1007/BF00550667 ↗
10. G.H. Beall, R.C. Doman, in: Proceedings of the Tenth International Conference on Science of Ceramics, 1980, pp. 25–36.
11. R.C.C. Monteiro, M.M.R. Augusto, F. Fragata, Euro-ceramics (Part II), vol. 3, Electroceramics and Ceramics for Special Applications, 1991, pp. 2539–2543.
12. Barry · J. Mater. Sci. · 1978 · 13 · 59410.1007/BF00541810 ↗
13. Zdaniewski · J. Am. Ceram. Soc. · 1975 · 58 · 16310.1111/j.1151-2916.1975.tb11435.x ↗
14. Wu · J. Am. Ceram. Soc. · 2000 · 83 · 125910.1111/j.1151-2916.2000.tb01364.x ↗
15. G.H. Beall, in: I. Birkby (Ed.), Proceedings of the Conference of Ceramic Technology International, Sterling Publications Ltd., London, England, 1992, pp. 89–93.
16. Weaver · Mater. Sci. Eng. A · 2003 · 339 · 9610.1016/S0921-5093(02)00119-3 ↗
17. Cuetos · Wear · 1993 · 169 · 17310.1016/0043-1648(93)90295-W ↗
18. A. Adamski, R. McPherson, in: Proceedings of the Eleventh International Thermal Spraying Conference on Advances in Thermal Spraying, ITSC’86, Montreal, Canada, 8–12 September 1986, pp. 555–562.10.1016/B978-0-08-031878-3.50060-5 ↗
19. K.A. Khor, S.C. Tam, L.E.N. Lim, S. Jana, L.J. Yag, W.S. Lau, in: Proceedings of the NANYANG Technological Institute Ceramic Conference on Ceramics, Adding the Value, vol. 2, 1992, pp. 810–815.
20. A. Petitbon, D. Guignot, U. Fisher, J.M. Guillemot, Mater. Sci. Eng. A 121, 1989, 545–548.10.1016/0921-5093(89)90813-7 ↗
21. H. Badekas, A. Koutsomichalis, in: Proceedings of the International Conference of Power Beam Technology on 1990, Stanford-upon-Avon, England, 1991, pp. 278–285.
22. M. Havrda, in: Proceedings of the Eleventh International Conference on Thermal Spraying, New York, 1986, pp. 569–575.10.1016/B978-0-08-031878-3.50062-9 ↗
23. D.T. Weaver, F.S. Miller, D.C. Van Aken, J.D. Smith, in: C.C. Berndt (Ed.), Proceedings of the First International Thermal Spray Conference, ASM International, Materials Park, OH, 2000, pp. 829–835.10.31399/asm.cp.itsc2000p0829 ↗