journal article·2007-06

Modeling quenching performance by the kuyucak method

Gustavo Sánchez Sarmiento, Joaquín Fernández Bugna, Lauralice C.F. Canale, Rosamel M. Muñoz Riofano, Rafael Agnelli Mesquita, George E. Totten, Antonio Carlos Canale

Materials Science and Engineering: A· Volume 459· Issue 1-2
Publisher page

Abstract

Abstract A report was recently published describing the use of an alternative to the commonly used thermocouple-probe assemblies for gathering time–temperature data to simulate microstructure, hardness and residual stresses of large castings of crack-sensitive steel alloys. This process involves the measurement of the increase of the water temperature in the quenching tank as a function of time as if the quench tank were a macro-calorimeter. From this data, cooling curves may be calculated which are then used to predict microstructure and hardness. However, no details of the actual modeling process used in that work have been published to date. This paper describes the results of a laboratory study which was recently performed using a round AISI 4140 steel bar to evaluate the feasibility of using water temperature rise during a quenching to generate a cooling curve for property prediction by simulation in a manner similar to that reported earlier. In addition to this work, computational simulation of the data obtained from this study to examine residual stress and as-quenched hardness is also discussed. The potential applicability of this approached to various commercial quenching installations is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. G.E. Toten, L.C.F. Canale, R. Agnelli, G.S. Sarmiento, R.M.M. Riofano, J.F. Bugna, Project: Villares Quench System Development, Part IV, 2006.
2. G.E. Toten, L.C.F. Canale, R. Agnelli, G.S. Sarmiento, R.M.M. Riofano, J.F. Bugna, Project: Villares Quench System Development, Part V, 2006.
3. Kuyucak · Heat Treating Process · 2005 · 60
4. Kuyucak · Heat Treating Process · 2005 · 42
5. G.S. Sarmiento, A. Gastón, J. Vega, Computational Mechanics—New Trends and Applications, in: E. Oñate, S.R. Idelsohn (Eds.), CIMNE, Barcelona, CD-Book, Part VI, Section 1, Paper 16, 1998.
6. Gastón · 1999
7. Sarmiento · 2001
8. Totten · 1993
9. SAE Standard. Methods of Determining Hardenability of Steels—SAE J406 May (1985).
10. Sarmiento · 1998 · 401
11. G.E. Totten, W. Bates, private communication, 1998.
12. ABAQUS, Inc., ABAQUS User's Manual, V. 6.5, 2005.
13. E-Mail Communication between G.E. Totten and S. Kuyucak, 2005.