The effect of thermomechanical processing on the creep behavior of Alloy 690
Source abstract
Abstract
Abstract The effect of thermomechanical processing on the microstructure and elevated-temperature creep behavior of Alloy 690 was investigated. Commercially available sheet was subjected to four cycles of cold rolling to 25% deformation followed by annealing at 1000 °C for 1 h. Both the resultant microstructure and the original microstructure were characterized using electron backscattered diffraction. The thermomechanically processed microstructure exhibited a slightly lower fraction of twins and a smaller average grain size than the original microstructure. Tensile–creep experiments were performed in an open-air environment at temperatures between 650 and 690 °C and stresses between 75 and 172 MPa. The measured creep stress exponents (4–5) activation energies (320–368 kJ/mol) suggested that dislocation creep with lattice self-diffusion was dominant. The thermomechanically processed microstructure exhibited significantly worse creep resistance than the original as-processed microstructure. Thus, cyclic strain and annealing processing, which has been shown to improve the ductility-dip cracking susceptibility of Alloy 690, is not recommended for enhancing the creep resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Dutta · Br. Corros. J. · 1999 · 3 · 20110.1179/000705999101500851 ↗
2. Sedricks · Boshoku Gijutsu · 1979 · 28 · 82
3. Cheung · Mater. Sci. Eng. · 1994 · 185A · 3910.1016/0921-5093(94)90925-3 ↗
4. Thuvander · Mater. Sci. Eng. · 2000 · 281A · 9610.1016/S0921-5093(99)00741-8 ↗
5. Palumbo · Acta. Metall. Mater. · 1990 · 11 · 234310.1016/0956-7151(90)90101-L ↗
6. G. Palumbo, U.S. Patent 5,817,193 (1998).
7. Alexandreanu · Mater. Sci. Eng. · 2001 · 300A · 9410.1016/S0921-5093(00)01705-6 ↗
8. Xia · Scripta Mater. · 2006 · 54 · 201910.1016/j.scriptamat.2006.03.014 ↗
9. Dave · Welding J. · 2004 · 1-S
10. Lehockey · Mater. Sci. Eng. · 1997 · 237A · 16810.1016/S0921-5093(97)00126-3 ↗
11. Was · J. Met. · 1998 · 44
12. Thaveeprungsriporn · Metall. Mater. Trans. A · 1997 · 28A · 210110.1007/s11661-997-0167-6 ↗
13. Palumbo · 1989 · 190
14. Boehlert · Metall. Mater. Trans. A · 2006 · 37A · 2710.1007/s11661-006-0149-0 ↗
15. Brandon · Acta Metall. · 1966 · 14 · 147910.1016/0001-6160(66)90168-4 ↗
16. Hilliard · Met. Prog. · 1964 · 78 · 99
17. Standard Test Methods for Determining Average Grain Size, ASTM Designation E112-96e3, American Society for Testing and Materials, West Conshohocken, PA.
18. Evans · 1985
19. Hertzberg · 1996
20. Langdon · Acta Metall. · 1982 · 30 · 88110.1016/0001-6160(82)90086-4 ↗
21. Weertman · Trans. Am. Soc. Met. · 1968 · 61 · 681