High-temperature yield strength and its dependence on primary creep and recovery
Source abstract
Abstract
Abstract Elasto-Delayed-Elastic-Viscous (EDEV), a predictive material model for ‘quasi constant-structure’ primary creep is used in developing an algorithm for predicting stress–strain diagrams at constant strain rates. The strain rate dependence of the 0.2% offset yield-strength ( σ y ), time to yield, and the amounts of permanent (viscous) and the recoverable (anelastic or delayed elastic) strain components of the 0.2% offset strain can also be evaluated. Six material constants required for calculations can be obtained from short-term (few seconds to a few hours), constant-stress Strain Relaxation and Recovery Tests (SRRTs). The method is illustrated by calculations made for Ni-based fcc alloy, Waspaloy at 732 °C (0.62 T m ) and Ti-based, alpha (hexagonal)-beta(bcc) alloy Ti-6246 at 600 °C (0.45 T m ). In the ASTM recommended strain-rate range, 5 × 10 −5 s −1 to 1.2 × 10 −4 s −1 , σ y increases by 6% for Waspaloy and 15% for Ti-6246. In this range, the 0.2% offset strain consists of 50% delayed elastic (anelastic) strain for Waspaloy and 70% for Ti-6246. Proportional limit is governed entirely by the delayed elastic effect or the Elasto-Delayed-Elastic (EDE) regime. Intragranular dislocation creep does not play the dominant role up to yield for the materials and temperatures considered, suggesting a shift in paradigm from conventional ideas. The EDEV model, in conjunction with SRRTs (which can be realized using a single specimen), can be used as a tool for characterizing and developing new alloys and ceramics or optimizing processing including grain-boundary engineering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. ASTM Designation: E-21-92, Reapproved 1998 for elevated temperature or E-8 in general, American Society for Testing and Materials (ASTM).
2. Garofalo · 1965
3. Gittus · 1975
4. Evans · 1985
5. Cadek · 1988
6. Nabarro · 1995
7. Zener · 1948
8. British Standard Institution (1975), Glossary of Rheological Terms, BSI-BS5168.
9. Rheological nomenclature10.1007/BF01515905 ↗
10. Dictionnaire de Rhéologie. Annales de l’Institut Technique du Bâtiment et des Travaux Publics, supplément au n° 295-296, juillet-août [1972]. Série: Questions Générales n° 123. Avant-propos de J. Mandel et de B. Persoz.
11. King · 1949
12. McLean · 1957
13. Conrad · 1961
14. Gifkins · 1959
15. Stevens · Metall. Rev. · 1966 · 11 · 12910.1179/imr.1966.11.1.129 ↗
16. Bell · J. Mater. Sci. · 1967 · 2 · 31310.1007/BF00572414 ↗
17. Interfaces
18. Bird · 1969
19. Langdon · Metall. Trans. · 1972 · 3 · 79710.1007/BF02647651 ↗
20. Langdon · 1973
21. Sinha · Exp. Mech. · 1978 · 18 · 46410.1007/BF02324282 ↗
22. Sinha · 2001
23. Sinha · Philos. Mag. A · 1979 · 40 · 82510.1080/01418617908234877 ↗
24. Sinha · J. Mater. Sci. · 1988 · 23 · 441510.1007/BF00551940 ↗
25. Sinha · Mater. Sci. Eng. A · 2005 · 393 · 17910.1016/j.msea.2004.10.003 ↗
26. Sinha · Scripta Mater. · 2003 · 48
27. Sinha · Mater. Sci. Eng. A · 2009 · 510–511 · 45010.1016/j.msea.2008.06.058 ↗
28. Ashby · Acta Metall. · 1973 · 21 · 14910.1016/0001-6160(73)90057-6 ↗
29. Sinha · Acta Metall. · 1989 · 37 · 310710.1016/0001-6160(89)90346-5 ↗
30. Garofallo · Trans. Am. Inst. Miner. Eng. · 1964 · 230 · 1460
31. Barrett · Trans. Am. Inst. Miner. Eng. · 1967 · 239 · 170
32. Sinha · 2005
33. Ashby · 1984
34. Sinha · J. Cold Regions Sci. Technol. · 1983 · 8 · 2510.1016/0165-232X(83)90014-9 ↗
35. Bailey · J. Inst. Met. · 1926 · 35 · 27
36. Orowan · J. West. Scotland Iron Steel Inst. · 1946 · 54 · 45
37. Fatigue creep and creep/fatigue behaviour of a nickel base superalloy at 700°C10.1111/j.1460-2695.1997.tb01488.x ↗
38. J. Bressers, E. Fenske, R. de Cat. Effects of test parameter variability on scatter of creep rupture data of Waspaloy, Report No. QC770 E89 EUR 7315 EN, Published by Commission of the European Communities, Luxembourg, 1981.
39. Haynes International, High-Temperature Alloys, Alloy at a Glance, Haynes Waspaloy alloy, H-3128C (2004).
40. Mannan · 2000
41. Raj · J. Am. Ceram. Soc. · 1990 · 73 · 40310.1111/j.1151-2916.1990.tb06525.x ↗
42. Whittenberger · Met. Trans. A · 1991 · 22A · 159510.1007/BF02667372 ↗
43. Wei-Di Cao · 2008
44. Sinha · Exp. Mech. · 1981 · 21 · 20910.1007/BF02326843 ↗
45. Sinha · 1979
46. Ashby · Acta Metall. · 1979 · 27 · 69910.1016/0001-6160(79)90105-6 ↗
47. Gandhi · Acta Metall. · 1979 · 27 · 156510.1016/0001-6160(79)90042-7 ↗
48. Morris · J. Mater. Sci. · 1977 · 12 · 158710.1007/BF00542809 ↗