Effect of austenite deformation in non-recrystallization region on microstructure development in low-silicon content TRIP-assisted steels
Source abstract
Abstract
Abstract The influence of austenite deformation in non-recrystallization region on microstructural development in low-silicon content TRIP-assisted steels was investigated. Laboratory simulation of a typical thermomechanical control processing was carried out in an automated hot-compression testing machine. Specimens subjected to a typical multi-stage isothermal deformation/cooling program were deformed to true strains of 0, −0.15, −0.25 and −0.35 at various temperatures in austenite non-recrystallization region. Mossbauer spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and a novel tint-etching method were used to investigate the microstructure of deformed specimens. The results indicated that the maximum volume fraction ( V RA ) and carbon content ( C RA % ) of retained austenite can be obtained by deforming samples to some intermediate strains ( e =−0.15 for V RA and e =−0.25 for C RA % ). However, further straining of samples to e =−0.35 resulted in a drastic reduction of both parameters due to formation of pearlite. It was found that a decrease in deformation temperature resulted in increasing V RA and C RA % . Moreover, deformation of austenite was associated with morphology changes in retained austenite particles from interlath film-like type in undeformed specimens to blocky and encapsulated types in the deformed specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A. Zarei-Hanzaki, S. Yue, ISIJ Int. 37, 1997, 583–58910.2355/isijinternational.37.583 ↗
2. S.M.K. Hosseini, A. Zarei-Hanzaki, S. Yue, in: Proceedings of the 23rd International Conference on Metallurgy and Materials METAL, 2014, Brno, Czech Republic, pp. 127–133.
3. Tamura · 1988
4. A. Zarei–Hanzaki, Transformation Characteristics of Si-Mn TRIP Steels after Thermomechanical Processing (Ph.D. thesis), McGill University, Quebec, Canada, 1994.
5. Zareai-Hanzaki · ISIJ Int. · 1995 · 35 · 7910.2355/isijinternational.35.79 ↗
6. Jacques · Mater. Sci. Eng. A · 1999 · 273–275 · 47510.1016/S0921-5093(99)00331-7 ↗
7. Zareai-Hanzaki · ISIJ Int. · 1995 · 35 · 32410.2355/isijinternational.35.324 ↗
8. Pereloma · Mater. Sci. Eng. · 1999 · 273A · 44810.1016/S0921-5093(99)00325-1 ↗
9. Gajda · J. Achiev. Mater. Manuf. Eng. · 2008 · 31 · 646
10. Hosseini · Mater. Sci. Technol. · 2008 · 24 · 135410.1179/174328407X192813 ↗
11. Hosseini · J. Mech. Eng. Autom. · 2013 · 3 · 650
12. Hosseini · Adv. Mater. Res. · 2014 · 856 · 25110.4028/www.scientific.net/AMR.856.251 ↗
13. Zarei-Hanzaki · Metall. Trans. · 1993 · 24A · 265710.1007/BF02659490 ↗
14. Hosseini · Mater. Sci. Eng., A · 2004 · 374 · 12210.1016/j.msea.2004.01.007 ↗
15. LePera · J. Met. · 1980 · 32 · 38
16. Bandoh · Trans. ISIJ · 1988 · 28 · 6910.2355/isijinternational1966.28.569 ↗
17. Ladriere · Mater. Sci. Eng. · 1986 · 77 · 13310.1016/0025-5416(86)90361-7 ↗
18. Cullity · 1978
19. Jacques · Metall. Mater. Trans. · 2001 · 32A · 275910.1007/s11661-001-1027-4 ↗
20. S. Lacroix, Y. Brechet, M. Veron, D. Quidort, M. Kandel, T. Iung, Materials Science and Technology 2003, Conference Proceedings, Section Austenite Formation and Decomposition, ISS and TMS, Warrendale, PA, 2003, 367.
21. Umemoto · ISIJ Int. · 1992 · 32 · 30610.2355/isijinternational.32.306 ↗
22. Kozasu · 1977 · 75 · 120
23. HSLA Steels: Metallurgy and Applications
24. S.B. Singh, Phase Transformations from Deformed Austenite (Ph.D. thesis), University of Cambridge, Cambridge, 1998.
25. Tsuzaki · Metall. Mater. Trans. · 1994 · 254 · 200910.1007/BF02649049 ↗
26. Umemoto · Trans. ISIJ · 1983 · 23 · 77510.2355/isijinternational1966.23.775 ↗
27. Basuki · J. Mater. Proc. Technol. · 1999 · 89–90 · 3710.1016/S0924-0136(99)00037-0 ↗
28. A.F.L. Mark, Microstructural Effects on the Stability of Retained Austenite in Transformation Induced Plasticity Steels (Ph.D. thesis), Queen׳s University, Canada, 2007.
29. Wang · Metall. Mater. Trans. · 2001 · 32A · 152710.1007/s11661-001-0240-5 ↗