journal article·2022-01

Bauschinger effect and latent hardening under cyclic micro-bending of Ni-base Alloy 718 single crystals: Part II. Single crystal plasticity modeling with latent kinematic hardening

Simon Schilli, Thomas Seifert, Marion Kreins, Ulrich Krupp

Publisher page

Abstract

Abstract In this paper, the Bauschinger effect and latent hardening of single crystals are assessed in finite element calculations using a single crystal plasticity model with kinematic hardening. To this end, results of cyclic micro-bending experiments on single crystal Alloy 718 in different crystal orientations (single slip and multi slip) with respect to the loading direction are used to determine the slip system related material properties of the single crystal plasticity model. Two kinematic hardening laws are considered: a kinematic hardening law describing latent hardening and a kinematic hardening law without latent hardening. For the determination of material properties for both hardening laws, a gradient-based optimization method is used. The results show that the different strength levels observed for micro-bending tests on different crystal orientations can only be described with latent kinematic hardening well, whereas the pronounced Bauschinger effect is described well by both kinematic hardening laws. It is concluded that cyclic micro-bending experiments on single crystals using different crystal orientations give an appropriate data base for the determination of the slip system related material properties of the single crystal plasticity model with latent kinematic hardening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Crystal plasticity analysis of micro-deformation, lattice rotation and geometrically necessary dislocation density
2. Failure of metals II: Fatigue10.1016/j.actamat.2015.05.050 ↗
3. Micromechanical modeling of fatigue crack initiation in polycrystals10.1557/jmr.2017.384 ↗
4. Über die Veränderung der Elastizitätsgrenze und der Festigkeit des Eisens und Stahls durch Strecken und Quetschen
5. Strain hardening of latent slip systems in zinc crystals
6. Generalized constitutive relations for incremental deformation of metal crystals by multislip10.1016/0022-5096(66)90040-8 ↗
7. Latent hardening in single crystals - I. Theory and experiments
8. Harder · 1997
9. Crystallographic model for the study of local deformation processes in polycrystals10.1016/S0749-6419(99)00002-9 ↗
10. Microstructure-based crystal plasticity modeling of cyclic deformation of Ti-6Al-4V10.1016/j.ijplas.2006.11.009 ↗
11. A polycrystalline model for the description of ratchetting: Effect of intergranular and intragranular hardening10.1016/j.msea.2007.06.071 ↗
12. Basic ingredients, development of phenomenological models and practical use of crystal plasticity
13. Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization10.1016/j.ijsolstr.2017.06.014 ↗
14. Micromechanical modelling of the cyclic deformation behavior of martensitic SAE 4150-A comparison of different kinematic hardening models10.3390/met9030368 ↗
15. A crystal plasticity-based constitutive model for ratchetting of cyclic hardening polycrystalline metals10.1007/s40435-020-00668-1 ↗
16. Kinematic hardening rule in single crystals10.1016/0020-7683(79)90055-6 ↗
17. Anisotropic hardening in single crystals and the plasticity of polycrystals10.1016/0749-6419(87)90007-6 ↗
18. A slip system-based kinematic hardening model application to in situ neutron diffraction of cyclic deformation of austenitic stainless steel10.1016/j.ijfatigue.2011.07.008 ↗
19. A microstructural model for the monotonic and the cyclic mechanical behavior of single crystals of superalloys at high temperatures10.1016/S0749-6419(00)00045-0 ↗
20. A comparison of dislocation induced back stress formulations in strain gradient crystal plasticity10.1016/j.ijsolstr.2006.05.011 ↗
21. On the influence of isotropic and kinematic hardening caused by strain gradients on the deformation behaviour of polycrystals10.1080/14786435.2013.847290 ↗
22. Multiscale modeling of the mechanical behavior of IN718 superalloy based on micropillar compression and computational homogenization10.1016/j.actamat.2015.07.006 ↗
23. Orientation informed nanoindentation of α-titanium: Indentation pileup in hexagonal metals deforming by prismatic slip10.1557/jmr.2011.334 ↗
24. Parameterization of a non-local crystal plasticity model for tempered lath martensite using nanoindentation and inverse method
25. Bauschinger effect and latent hardening under cyclic micro-bending of Ni-base Alloy 718 single crystals: Part I. Experimental analysis of single and multi slip plasticity10.1016/j.msea.2021.142027 ↗
26. Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique10.1016/j.actamat.2005.05.036 ↗
27. Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams10.1016/j.actamat.2009.07.064 ↗
28. Dassault Systèms · 2019
29. Constitutive analysis of elastic-plastic crystals at arbitrary strain10.1016/0022-5096(72)90017-8 ↗
30. Strain localization in ductile single crystals10.1016/0022-5096(77)90001-1 ↗
31. Huang · 1991
32. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
33. Latent hardening in single crystals. II. Analytical characterization and predictions
34. Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity10.1016/0022-5096(71)90010-X ↗
35. Single crystal modeling for structural calculations: Part 1—Model presentation10.1115/1.2903374 ↗
36. Single crystal modeling for structural calculations: Part 2—Finite element implementation10.1115/1.2903375 ↗
37. Armstrong · 1966
38. Time-independent constitutive theories for cyclic plasticity10.1016/0749-6419(86)90010-0 ↗
39. Constitutive equations for cyclic plasticity and cyclic viscoplasticity10.1016/0749-6419(89)90015-6 ↗
40. Bending of single crystal microcantilever beams of cube orientation: Finite element model and experiments10.1016/j.jmps.2010.07.007 ↗
41. Kraft · 1988
42. The SciPy Community · 2020
43. Efficient and modular algorithms in modeling finite inelastic deformations: Objective integration, parameter identification and sub-stepping techniques10.1016/j.cma.2006.12.002 ↗
44. Modelling of anisotropic elastic properties in Alloy 718 built by electron beam melting10.1080/02670836.2018.1426258 ↗
45. Robust optimization scheme for inverse method for crystal plasticity model parametrization10.3390/ma13030735 ↗
46. An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy10.1016/j.ijplas.2014.02.001 ↗
47. Importance of dislocation pile-ups on the mechanical properties and the Bauschinger effect in microcantilevers10.1557/jmr.2015.49 ↗
48. The mechanical size effect as a mean-field breakdown phenomenon: Example of microscale single crystal beam bending10.1016/j.actamat.2009.11.031 ↗