journal article·2021-02Open access

Microstructures generated in AISI 316L stainless steel by Vickers and Berkovich indentations

Daria Grabco, Olga Shikimaka, Constantin Pyrtsac, Andrian Prisacaru, Zinaida Barbos, Mihaela Bivol, Sergei Alexandrov, Dragisha Vilotic, Marko Vilotic

Abstract

The work aimes for studying the specifics of deformation of AISI 316L stainless austenitic steel under the conditions of micro severe plastic deformation (mSPD) created locally at the submicro and micro levels using Berkovich and Vickers indenters. The deformation was carried out by instrumented (depth-sensing), quasi-static indentation and microscratching methods in the load interval P = 10–2000 mN. Studies have shown that various mSPD methods (submicro-, microindentation and microscratching) create similar patterns of plastic deformation in thin surface layers of the material. The stick-slip nature of the scratching process has been demonstrated. It has been established that in the region of loads below 50 mN, the intragranular deformation mechanism has the main contribution to the formation of indentations, while at loads above 50 mN, intragranular and intergranular mechanisms participate in the process, and the role of the latter becomes greater with P increase. Load growth leads to a decrease in hardness under submicro-, microindentation and microscratching for all applied mSPD methods. The type of mSPD method, as well as the type of indenter and the magnitude of the applied load are the factors affecting the mechanical characteristics that should be taken into account depending on the practical purpose of the AISI 316L austenitic steel products.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Residual Stress · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Schun, Nanoindentation studies of materials10.1016/S1369-7021(06)71495-X ↗
2. VanLandingham, review of instrumented indentation10.6028/jres.108.024 ↗
3. Mechanical properties and microstructure of austenitic stainless steel after welding and post-weld heat treatment
4. Dislocation in Solids
5. Mechanical properties of polycrystalline copper and single-crystal LiF initial components for composite system Cu/LiF10.3103/S1068375516030066 ↗
6. Microstructure and nanoindentation characterization of low temperature hybrid treated layer on austenitic stainless steel10.1088/1757-899X/46/1/012043 ↗
7. Unusual strain rate sensitive behaviour of AISI 316L austenitic stainless Steel10.1177/030932470403900106 ↗
8. Mechanical properties of AISI 316L austenitic stainless steels welded by GTAW10.4028/www.scientific.net/AMR.849.50 ↗
9. Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies10.1007/s00170-010-2631-5 ↗
10. Tensile and impact toughness properties of various regions of dissimilar joints of nuclear grade steels10.1016/j.net.2017.10.003 ↗
11. Mechanical properties of AISI 316L stainless steels joined with a commercial Ni based amorphous foil
12. Deformation behavior and structure of i-Al-Cu-Fe quasicrystalline alloy in vicinity of nanoindenter10.1134/S1063783418020233 ↗
13. Mechanical behaviour of pack carburized AISI 316L austenitic stainless steel10.17159/2411-9717/2015/v115n12a6 ↗
14. A comparative study of mechanical and tribological properties of AISI-304 and AISI-316 submitted to glow discharge nitriding10.1590/S1516-14392009000200011 ↗
15. Plastic deformation mechanisms in nanocrystalline metallic materials10.1515/jmbm-2012-0005 ↗
16. Nanoindentation studies and modeling of surface layers on austentic stainless steels by extreme electrochemical treatments10.1002/sia.5758 ↗
17. Dissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 65710.1016/j.jmatprotec.2008.08.019 ↗
18. Enhanced fatigue resistance in 316L austenitic stainless steel due to low-temperature paraequilibrium carburization10.1016/j.actamat.2007.06.025 ↗
19. The nature of expanded austenite10.1016/S0257-8972(00)00804-5 ↗
20. Surface engineering of austenitic stainless steel10.1179/026708402225006268 ↗
21. Introduction to surface hardening of steels
22. 2003 · #
23. Biomaterials in orthopaedics10.1098/rsif.2008.0151 ↗
24. Research and development of metals for medical devices based on clinical needs
25. Sastri. Materials used in medical technology
26. Severe plastic deformation of metals10.30544/380 ↗
27. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
28. Developing stable fine-grain microstructures by large strain deformation10.1098/rsta.1999.0395 ↗
29. New severe plastic deformation process to produce ultrafine grained materials
30. Valiev · 2003 · vol. 128 · 239
31. Kulak · 2001 · 352
32. Investigation of the strength characteristics of hard tissues of teeth after vital amputation
33. Deformation mechanism as a function of applied load under metal Microindentation
34. Translation-rotation plasticity as basic mechanism of plastic deformation in macro-, micro- and nanoindentation processes
35. An approach to prediction of evolution of material properties in the vicinity of frictional interfaces in metal forming10.4028/www.scientific.net/KEM.345-346.741 ↗
36. The determination of the thickness of a layer of intensive deformations in the vicinity of the friction surface in metal forming processes10.3103/S105261880903011X ↗
37. Behaviour of ductile materials under friction, extrusion and concentrated load action
38. Evolution of change in microstructure of material as it moves farther from frictional contact surface under conditions of intense plastic deformation
39. High strain-rate scratch testing of nanoscale materials
40. The existence of a lateral size effect and the relationship between indentation and scratch hardness in copper10.1080/14786435.2016.1146828 ↗
41. ASTM G171 standard test method for scratch hardness of materials using a diamond stylus
42. Deformation mechanisms under nanoscratching of Si: effect of scratching speed, load and indenter orientation10.1088/2053-1591/ab1a0d ↗
43. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
44. Deformation created by Berkovich and Vickers indenters and its influence on surface morphology of indentations for LiF and CaF2
45. Effects of solute Mg on grain boundary and dislocation dynamics during nanoindentation of Al–Mg thin films10.1016/j.actamat.2004.08.032 ↗
46. Pop-in effect as homogeneous nucleation of dislocations during nanoindentation10.1103/PhysRevB.67.172101 ↗
47. Influence of speed of relative deformation on the size of crack resistance Si and Ge at dynamic micro-indentation
48. Influence of relative strain rate on relief formation near imprint during dynamic microindentation
49. Grigorovich · 1976 · 232
50. Blokh · 1964 · 483
51. Honeycombe · 1982 · 483
52. Prager · 1951 · 398
53. O'Neill · 1967 · 238
54. Grabco · 1982 · 133
55. The nature of sliding and the analysis of friction10.1098/rspa.1939.0004 ↗
56. Bowden · 1950 · 424
57. Stick-slip in the scratching of styrene-acrylonitrile copolymer10.1557/JMR.1996.0197 ↗
58. The indentation size effect: a critical examination of experimental observations and mechanistic interpretations10.1146/annurev-matsci-070909-104456 ↗
59. Dislocation-disclination mechanism of deformation under microindentation
60. The influence of grain size on the indentation hardness of high-purity copper and aluminium10.1080/01418610208235717 ↗