journal article·2020-07

The correlation between prior fatigue damage and remaining creep properties in a high chromium steel welded joint

Wei Zhang, Tianyu Zhang, Xiaowei Wang, Yunnan Ji, Jianming Gong

Publisher page

Abstract

Abstract Strain cycling prior to a constant load exposure is expected to influence the creep properties. The present work aimed to evaluate the effect of prior low cycle fatigue (LCF) damage on the remaining creep properties of P92 steel welded joints. Strain amplitudes of 0.25%, 0.4% and 0.6% and fatigue cycles ranging from 10% to 80% of the number of cycles to failure (Nf) were introduced in creep specimens to represent fatigue damage. A critical analysis of the creep test responses revealed that a high strain amplitude and high fatigue cycles induced a clear reduction in the remaining creep life; conversely, prior LCF also led to a significant increase in the creep rupture strain. It was found that prior LCF loading produced its saturated effect after fatigue cycles at 70% Nf or a strain amplitude of 0.4%. It is important to note that the degradation of the remaining creep life of a welded joint was more severe than that found in homogeneous base metal. It was also observed that the failure location and development of creep voids were dependent on both the number of fatigue cycles and strain amplitude. Additionally, the prior fatigue damage was evaluated using a defined damage parameter that revealed two nonlinear stages of fatigue damage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant10.1016/S1359-6454(97)00176-6 ↗
2. Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature10.1016/j.msea.2010.03.001 ↗
3. Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel10.1016/j.engfailanal.2018.09.036 ↗
4. Creep strength breakdown and microstructure evolution in a 3% Co modified P92 steel10.1016/j.msea.2015.12.027 ↗
5. Low cycle fatigue behavior and microstructural evolution of modified 9Cr-1Mo ferritic steel10.1016/j.msea.2006.07.146 ↗
6. High-temperature low-cycle fatigue behavior of a 9Cr-ODS steel: Part 1-pure fatigue, microstructure evolution and damage characteristics10.1016/j.msea.2017.09.031 ↗
7. Effect of precipitates on the corrosion-fatigue crack initiation of ISO 5832-9 stainless steel biomaterial10.1016/j.ijfatigue.2004.03.002 ↗
8. Effect of normalization and tempering on microstructure and mechanical properties of v-groove and narrow-groove P91 pipe weldments10.1016/j.msea.2016.12.079 ↗
9. Distribution and formation mechanism of residual stress in duplex stainless steel weld joint by neutron diffraction and electron backscatter diffraction10.1016/j.matdes.2019.108086 ↗
10. On-line fatigue-creep monitoring system for high-temperature components of power plants10.1016/S0142-1123(01)00009-3 ↗
11. Cyclic deformation and lifetime of Alloy 617B during isothermal low cycle fatigue10.1016/j.ijfatigue.2013.06.001 ↗
12. The mechanism of fatigue softening10.1080/14786436208201860 ↗
13. Low-amplitude fatigue of copper and copper-5at.% aluminum single crystals10.1080/14786437308217440 ↗
14. Strain localization in cyclic deformation of copper single crystals10.1080/14786437508228937 ↗
15. The effect of work-hardening on the low strain amplitude fatigue of copper crystals10.1080/14786437508228941 ↗
16. Creep induced by load cycling in a C-Mn steel10.1016/0001-6160(76)90094-8 ↗
17. Creep stimulated by interrupted loading in copper and copper-1% cadmium10.1016/0025-5416(79)90087-9 ↗
18. Effects of plastic pre-straining level on the creep deformation, crack initiation and growth behaviour of 316H stainless steel10.1016/j.ijpvp.2016.03.013 ↗
19. Influence of prior cyclic hardening on high temperature deformation and crack growth in type 316L(N) stainless steel10.1080/09603409.1998.11689599 ↗
20. Influence of prior fatigue cycling on creep behavior of reduced activation ferritic-martensitic steel10.1007/s11661-014-2237-x ↗
21. Influence of prior low cycle fatigue on microstructure evolution and subsequent creep behavior10.1016/j.ijfatigue.2018.01.001 ↗
22. Evaluation of the effect of various prior creep-fatigue interaction damages on subsequent tensile and creep properties of 9% Cr steel10.1016/j.ijfatigue.2019.04.018 ↗
23. Nanoindentation investigation on the creep behavior of P92 steel weld joint after creep-fatigue loading10.1016/j.ijfatigue.2020.105506 ↗
24. Low cycle fatigue behaviour of Grade 92 steel weld joints10.1016/j.ijfatigue.2017.08.013 ↗
25. Characterization of as-welded microstructure of heat-affected zone in modified 9Cr-1Mo-V-Nb steel weldment10.1016/j.matchar.2016.05.024 ↗
26. Improving the creep properties of 9Cr-3W-3Co-NbV steels and their weld joints by the addition of boron10.1007/s11661-005-0306-x ↗
27. ASTM standard E2714-13 · 2013
28. High-temperature low-cycle fatigue behavior of novel austenitic ODS steels10.1016/j.ijfatigue.2016.08.018 ↗
29. Low cycle fatigue of Eurofer 9710.1016/j.jnucmat.2008.02.054 ↗
30. Micromechanical model of the high temperature cyclic behavior of 9-12% Cr martensitic steels10.1016/j.ijplas.2011.05.007 ↗
31. Contribution of microstructure and slip system to cyclic softening of 9 wt.% Cr steel10.1016/j.ijfatigue.2011.09.004 ↗
32. Modelling recovery kinetics in high-strength martensitic steels
33. Influence of strain rate on P92 microstructural stability during fatigue tests at high temperature
34. Fatigue softening of X10CrAl24 ferritic steel10.1016/S0921-5093(01)01004-8 ↗
35. Experimental and simulated characterization of creep behavior of P92 steel with prior cyclic loading damage10.1016/j.jmst.2017.09.006 ↗
36. Some studies on P91 steel and their weldments10.1016/j.jallcom.2018.01.120 ↗
37. Type IV cracking behaviour of modified 9Cr-1Mo steel weld joints10.1080/09603409.2015.1137158 ↗
38. Review of type IV cracking of weldments in 9-12% Cr creep strength enhanced ferritic steels10.1179/1743280412Y.0000000016 ↗
39. Creep damage evaluation of 9Cr-1Mo-V-Nb steel welded joints showing Type IV fracture10.1016/j.ijpvp.2005.09.004 ↗
40. Creep-fatigue evaluation method for modified 9Cr-1Mo weldment, SMiRT-12/K
41. Characterizing high temperature crack growth behaviour under mixed environmental, creep and fatigue conditions10.1016/j.msea.2018.04.109 ↗
42. Creep rupture behavior of welded Grade 91 steel10.1016/j.msea.2016.05.065 ↗
43. Characterization of microstructures across the heat-affected zone of the modified 9Cr-1Mo weld joint to understand its role in promoting type IV cracking10.1007/s11661-006-9050-0 ↗
44. Deformation-mechanism-based creep model and damage mechanism of g115 steel over a wide stress range
45. The effect of tempering temperature on the mechanical properties and fracture morphology of a NiCrMoV steel10.1016/j.matchar.2007.02.012 ↗
46. A comparative study on the cyclic plasticity and fatigue failure behavior of different subzones in CrNiMoV steel welded joint10.1016/j.ijmecsci.2018.10.026 ↗
47. Causes of breakdown of creep strength in 9Cr-1.8 W-0.5 Mo-VNb steel10.1016/j.msea.2006.05.010 ↗
48. On the contribution of carbides and micrograin boundaries to the creep strength of tempered martensite ferritic steels10.1016/j.actamat.2006.08.046 ↗
49. Effects of defects, inclusions and inhomogeneities on fatigue strength10.1016/0142-1123(94)90001-9 ↗
50. Effect of inclusion on subsurface crack initiation and gigacycle fatigue strength10.1016/S0142-1123(02)00037-3 ↗
51. Microstructure and long-term creep properties of 9–12% Cr steels10.1016/j.ijpvp.2007.06.010 ↗
52. Stabilization of martensitic microstructure in advanced 9Cr steel during creep at high temperature10.1016/j.msea.2003.11.073 ↗
53. Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr-W steels10.1016/j.msea.2004.01.057 ↗
54. Martensite laths in creep resistant martensitic 9-12% Cr steels - calculation and measurement of misorientations10.1016/j.matchar.2006.08.014 ↗
55. Cyclically induced softening due to low-angle boundary annihilation in a martensitic steel10.1016/j.msea.2005.02.092 ↗
56. Microstructural evolutions and cyclic softening of 9% Cr martensitic steels10.1016/j.jnucmat.2008.12.061 ↗
57. Low-cycle fatigue properties of P92 ferritic-martensitic steel at elevated temperature10.1007/s11665-016-1977-8 ↗
58. Insight into Type IV cracking in Grade 91 steel weldments10.1016/j.matdes.2020.108570 ↗