Characterization of the fatigue behaviour for SAE 1045 steel without and with load-free sequences based on non-destructive, X-ray diffraction and transmission electron microscopic investigations
Source abstract
Abstract
Abstract The change of mechanical stress-strain-hysteresis and different physical parameters during fatigue tests have been measured to demonstrate the fatigue behaviour and damage evolution processes of metallic materials. The electrical resistance e.g. can provide important information regarding the microstructural alteration by indicating the development of dislocation density. The states of such parameters of a fatigue specimen in a load-free sequence can represent the state of a component with a defined cyclic loading history. Therefore, conventional techniques measuring these parameters of common fatigue tests or even of service load tests with additional load-free sequences should have the application potential of remaining service life estimation and must be experimentally validated. In the scope of this paper, characteristic cycle-dependent changes of diverse physical parameters of fatigue specimens made from normalized SAE 1045 steel were determined and correlated with the residual stress state and dislocation density quantified by X-ray diffraction (XRD) and transmission electron microscopy (TEM) respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Non-Destructive Testing Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Cyclic stress-strain response and fatigue life of metals in low-amplitude region10.1016/0025-5416(73)90125-0 ↗
2. Determination of fatigue curve parameters at cyclic strain limited loading according to the mechanical characteristics of power energy structural materials10.1016/j.nucengdes.2011.07.022 ↗
3. Dissipative aspects in thermographic methods10.1111/j.1460-2695.2012.01701.x ↗
4. A two-parameter, heat energy-based approach to analyse the mean stress influence on axial fatigue behaviour of plain steel specimens10.1016/j.ijfatigue.2015.07.028 ↗
5. An analysis of the specific heat loss at the tip of severely notched stainless steel specimens to correlate the fatigue strength10.1016/j.tafmec.2017.09.003 ↗
6. Estimation of changes in the mechanical properties of stainless steel subjected to fatigue loading via electrical resistance monitoring10.1016/j.ijengsci.2013.02.006 ↗
7. Evaluation of the growth of dislocations density in fatigue loading process via electrical resistivity measurements10.1007/s10704-012-9780-5 ↗
8. Electrical resistance of metal films on polymer substrates under tension10.1007/s40799-016-0040-x ↗
9. A high-cycle fatigue accumulation model based on electrical resistance for structural steels10.1111/j.1460-2695.2007.01175.x ↗
10. Electrical resistance changes of cyclically deformed copper10.1016/0025-5416(74)90012-3 ↗
11. Model-based correlation between change of electrical resistance and change of dislocation density of fatigued-loaded ICE R7 wheel steel specimens10.3139/120.111202 ↗
12. The potential drop method for monitoring crack growth in real components subjected to combined fatigue and creep conditions: application of FE techniques for deriving calibration curves10.1016/S0308-0161(01)00103-X ↗
13. Fatigue crack propagation in cellular metals10.1016/j.ijfatigue.2005.06.044 ↗
14. Dieter
15. Hull
16. The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels10.1016/S1359-6454(03)00324-0 ↗
17. Zuo · 1992
18. Position averaged convergent beam electron diffraction: theory and applications10.1016/j.ultramic.2009.10.001 ↗
19. Din · 2006
20. Fatigue life calculation of SAE1050 and SAE 1065 steel under random loading10.1016/j.ijfatigue.2007.01.005 ↗
21. Fatigue assessment and fatigue life calculation of quenched and tempered SAE 4140 steel based on stress-strain hysteresis, temperature and electrical resistance measurements10.1111/j.1460-2695.2007.01174.x ↗
22. Morrow · 1964
23. SteBLife – a new short-time procedure for the evaluation of fatigue data10.1016/j.ijfatigue.2019.02.049 ↗
24. A unified fatigue life calculation based on intrinsic thermal dissipation and microplasticity evolution10.1016/j.ijfatigue.2019.105370 ↗
25. Thermography in high cycle fatigue short-term evaluation procedures applied to a medium carbon steel10.1111/ffe.13136 ↗
26. Bewertung zyklischer Verformungsvorgänge metallischer Werkstoffe mit Hilfe mechanischer, thermometrischer und elektrischer Meßverfahren10.1002/mawe.19950260305 ↗
27. Electrical conductivity and resistivity
28. Matthiessen's rule and the electrical resistivity of iron-silicon solid solutions10.1016/0022-3697(69)90213-3 ↗
29. Gates-Rector · 2019
30. X-ray residual stress analysis of nitrided low alloyed steels10.3139/120.110344 ↗
31. Scripting-customised microscopy tools for digital MicrographTM10.1016/j.ultramic.2005.02.003 ↗
32. Mean free path of inelastic electron scattering in elemental solids and oxides using transmission electron microscopy: atomic number dependent oscillatory behavior10.1103/PhysRevB.77.104102 ↗
33. An introduction to EELS
34. Hirsch · 1965
35. Use of non-destructive testing methods in a new one-specimen test strategy for the estimation of fatigue data10.1016/j.ijfatigue.2018.02.011 ↗
36. PHYBAL-A new method for lifetime prediction based on strain, temperature and electrical measurements10.1016/j.ijfatigue.2005.07.050 ↗
37. StressLife tc – NDT-related assessment of the fatigue life of metallic materials10.3139/120.111319 ↗
38. Heckmann