Abnormal hot deformation behavior in a metallic-glass-reinforced Al-7075 composite
Source abstract
Abstract
Abstract The poor hot workability of aluminum matrix composites (AMCs) severely limits their engineering use. Here an abnormal hot deformability phenomenon was observed in a metallic glass-particle-reinforced AMC in which the composite shows higher strength at room temperature and lower strength at higher temperatures than the monolithic Al-7075 alloy, indicating excellent hot workability. It reveals that the metallic glass at high temperature may be as a soft binder to release the local stress concentration during deformation owing to drop in viscosity. This study provides new opportunities for designing and achieving good workability in AMCs for advanced structural applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Taya · 2016
2. Synthesis and mechanical behavior of nanostructured Al 5083/n-TiB2 metal matrix composites10.1016/j.msea.2016.01.031 ↗
3. Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites10.1038/srep24384 ↗
4. Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting10.1016/j.powtec.2016.12.079 ↗
5. Selective laser melting of advanced Al-Al2O3 nanocomposites: simulation, microstructure and mechanical properties10.1016/j.msea.2017.05.061 ↗
6. Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs)10.1007/s10853-017-1378-x ↗
7. Hot deformation mechanisms and microstructure evolution of SiCp/2014Al composite10.1016/j.jallcom.2017.06.065 ↗
8. Mechanically alloyed nanocomposites10.1016/j.pmatsci.2012.10.001 ↗
9. Synthesis and characterization of high volume fraction Al–Al2O3 nanocomposite powders by high-energy milling10.1016/j.msea.2006.03.066 ↗
10. Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles10.1016/j.jallcom.2014.12.254 ↗
11. Hot deformation characteristics and mechanism of PM 8009Al/SiC particle reinforced composites10.1016/j.msea.2017.05.016 ↗
12. Hot deformation behavior and microstructural evolution of homogenized 7050 aluminum alloy during compression at elevated temperature10.1016/j.msea.2010.11.016 ↗
13. Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles10.1016/j.msea.2014.02.003 ↗
14. Al-based matrix composites reinforced with short Fe-based metallic glassy fiber10.1016/j.jallcom.2015.08.098 ↗
15. A novel high-strength Al-based nanocomposite reinforced with Ti-based metallic glass nanoparticles produced by powder metallurgy10.1016/j.msea.2018.07.082 ↗
16. Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles10.1016/j.jallcom.2013.04.190 ↗
17. Dislocations in icosahedral quasicrystalline phase embedded in hot-deformed Mg alloys10.1016/j.jallcom.2015.10.284 ↗
18. On the microstructure, hardness and wear behavior of Al-Fe-Cr quasicrystal reinforced Al matrix composite prepared by selective laser melting10.1016/j.matdes.2017.06.060 ↗
19. Additive manufacturing of an aluminum matrix composite reinforced with nanocrystalline high-entropy alloy particles10.1016/j.msea.2016.10.038 ↗
20. The influence of nanocrystalline CoNiFeAl0.4Ti0.6Cr0.5 high-entropy alloy particles addition on microstructure and mechanical properties of SiCp/7075Al composites10.1016/j.msea.2018.04.080 ↗
21. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
22. Suryanarayana · 2004
23. Microstructure and mechanical property of bimodal-size metallic glass particle-reinforced Al alloy matrix composites10.1016/j.jallcom.2019.152317 ↗
24. 3D characterization of ultrasonic melt processing on the microstructural refinement of AlCu alloys using synchrotron X-ray tomography10.1016/j.matchar.2019.04.040 ↗
25. Synchrotron X-ray tomography investigation of 3D morphologies of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys10.1016/j.jallcom.2018.10.334 ↗
26. Mechanical properties of submicron‐grained TiAl alloys prepared by mechanical alloying10.1063/1.113604 ↗
27. Suryanarayana · 2018
28. Effect of homogeneous/heterogeneous precipitation on aging behavior of SiCPAl 2014 composite10.1016/0956-716X(91)90407-R ↗
29. Suresh · 1993 · 119
30. Accelerated aging in cast Al alloy-SiC particulate composites10.1016/0036-9748(89)90136-1 ↗
31. Influence of particle size and spatial distribution of B4C reinforcement on the microstructure and mechanical behavior of precipitation10.1016/j.msea.2016.08.062 ↗
32. Relationship between thermal expansion coefficient and glass transition temperature in metallic glasses10.1016/j.scriptamat.2008.02.006 ↗