journal article·2020-01

Softening behavior of Al-Zn-Mg alloys with different strengthening mechanisms in a coupled field

Hexiong Zhang, Xinfang Zhang

Publisher page

Abstract

Abstract The softening behavior of Al-Zn-Mg alloys in solid solutions and aging states was investigated under an electric pulse by establishing the Hall-Petch relationship. Because intragranular strengthening and grain boundary strengthening are described separately by the Hall-Petch relationship, the difference between the intragranular softening behavior and grain boundary softening behavior under an electric pulse could be discerned. The effect of an electric pulse on the metal was studied, and it was concluded that this effect was caused by the coupled effect of Joule heating and drifting electrons. The decrease in stress (intragranular and grain boundary) caused by Joule heating was significantly greater for the solid solution alloy than that for the aging alloy. On the other hand, the decrease in stress at the grain boundary caused by drifting electrons was greater for the solid solution alloy than that for the aging alloy, while the decrease in intragranular stress caused by drifting electrons was significantly smaller for the solid solution alloy than that for the aging alloy. Based on the principles of electron scattering, interaction between electrons, dislocation, and electromigration, the essential reasons for the observed discrepancy in the softening behavior under different strengthening mechanisms were revealed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Anisotropy of action of gamma-electronic emission and gamma rays on deformation of single zinc crystals in the brittle state
2. A review of electrically-assisted manufacturing10.1007/s40684-015-0045-4 ↗
3. Experimental study and analysis on the electrically-assisted tensile behaviors of Inconel 718 alloy10.1016/j.proeng.2017.10.789 ↗
4. Effect of electropulses on the machinability of a C45E steel
5. Electroplastic drilling of low-and high-strength steels10.1115/1.4039648 ↗
6. A review of electrically-assisted manufacturing with emphasis on modeling and understanding of the electroplastic effect10.1115/1.4036716 ↗
7. Recrystallization characterizations of an Al-Zn-Mg-Cu-Zr alloy during multi-pass hot rolling simulation10.1016/S1875-5372(18)30035-3 ↗
8. Improvement of microstructure and properties in twin-roll casting 7075 sheet by lower casting speed and compound field10.1016/j.matchar.2017.03.024 ↗
9. Effect of directed electron beam on moving dislocations
10. An evaluation of the contributions of skin, pinch and heating effects to the electroplastic effect in titatnium10.1016/0025-5416(80)90216-5 ↗
11. Effect of electric current on stress relaxation in metal10.1007/BF02215837 ↗
12. Deformation mechanisms and recrystallization behavior of Mg-3Al-1Zn and Mg-1Gd alloys deformed by electroplastic-asymmetric rolling10.1016/j.msea.2018.09.041 ↗
13. Achieving heterogeneous structure in hcp Zr via electroplastic rolling10.1016/j.msea.2018.02.106 ↗
14. Achieving ultralow elastic modulus in TiNi alloy by controlling nanoscale martensite phase10.1016/j.matlet.2018.09.041 ↗
15. Mg-3Al-1Zn alloy strips processed by electroplastic differential speed rolling10.1080/02670836.2016.1180796 ↗
16. Effect of pulsed electric current on TRIP-aided steel
17. Electroplastic effect on AA1050 aluminium alloy formability10.1016/j.cirp.2018.04.054 ↗
18. Electroplastic behaviour in an aluminium alloy and dislocation density based modeling10.1016/j.matdes.2017.03.072 ↗
19. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
20. The cleavage strength of polycrystals
21. Effect of grain boundary segregation of interstitial elements on Hall-Petch coefficient in steels10.2320/matertrans.MA201314 ↗
22. Effect of low temperature aging on Hall-Petch coefficient in ferritic steels containing a small amount of carbon and nitrogen10.2355/isijinternational.ISIJINT-2018-130 ↗
23. H. Zhang and X. Zhang, Hall-Petch relationship in electrically pulsed Al-Zn-Mg alloys, Adv. Eng. Mater., https://doi.org/10.1002/adem.2019006381900638; 1 to 13.
24. Microstructural, mechanical and electrochemical behaviour of a 7017 Al-Zn-Mg alloy of different tempers10.1016/j.matchar.2015.03.025 ↗
25. Precipitation behaviors and properties of solution-aging Al-Zn-Mg-Cu alloy refined with TiN nanoparticles10.1016/j.jallcom.2018.02.271 ↗
26. Aging behavior and fatigue crack propagation of high Zn-containing Al-Zn-Mg-Cu alloys with zinc variation10.1016/j.pnsc.2017.02.002 ↗
27. Electrical wind force-driven and dislocation-templated amorphization in phase-change nanowires10.1126/science.1220119 ↗
28. Electromigration in metals10.1088/0034-4885/52/3/002 ↗