journal article·2020-01Open access

Physical modeling of the creep response of an Al–Cu–Mg alloy with a fine microstructure transformed by Friction Stir Processing

E. Santecchia, M. Cabibbo, M. Ghat, M. Regev, S. Spigarelli

Abstract

Abstract The creep response of an Al–Cu–Mg 2024 Aluminum alloy with a refined microstructure produced by Friction Stir Processing (FSP) has been investigated. The material, after FSP, exhibited a strong reduction in creep resistance, attested by higher values of the minimum creep rate, when compared with the base metal (the AA2024 in T3 state). A constitutive model based on a theoretical approach has been then used to correlate microstructural features and creep properties. The model was modified to take into account the microstructure of the transformed alloy, with a fine recrystallized grain size and lower mechanical strength. The hardness variation with creep duration was used to quantify the particle strengthening term. The resulting model gave an excellent description of the experimental results, without requiring any data-fitting of the minimum creep rate experimental data. This achievement represents a substantial advantage over conventional approaches based on phenomenological equations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Significance of continuous precipitation during creep of a powder metallurgy aluminum alloy10.1016/0921-5093(96)10404-4 ↗
2. Creep behavior of an aluminum 2024 alloy produced by powder metallurgy10.1016/S1359-6454(96)00190-5 ↗
3. Creep properties of an Al-2024 composite reinforced with SiC particulates10.1016/S0921-5093(01)01698-7 ↗
4. Basic model for primary and secondary creep in copper10.1016/j.actamat.2011.09.052 ↗
5. Influence of phosphorus on the tensile stress strain curves in copper10.1016/j.jnucmat.2015.12.024 ↗
6. The role of cell structure during creep of cold worked copper10.1016/j.msea.2016.08.004 ↗
7. Basic creep modelling of aluminum10.1016/j.msea.2017.11.053 ↗
8. A unified physical model for creep and hot working of Al-Mg solid solution alloys10.3390/met8010009 ↗
9. A new model for the description of creep behaviour of aluminium-based composites reinforced with nanosized particles10.1016/j.compositesa.2018.06.021 ↗
10. Modelling of creep in alloys strengthened by rod-shaped particles: Al-Cu-Mg age-hardenable alloys10.3390/met8110930 ↗
11. Precipitation in Al-Cu-Mg alloy during creep exposure10.1016/j.msea.2012.07.069 ↗
12. Precipitation hardening of 2024-T3 aluminum alloy during creep aging10.1016/j.msea.2012.12.058 ↗
13. Study of mechanical, microstructural and thermal stability properties of friction stir processed aluminum 2024-T3 alloy10.4149/km_2019_4_229 ↗
14. High strain rate superplasticity in a friction stir processed 7075 Al alloy10.1016/S1359-6462(99)00329-2 ↗
15. A bottom-up approach for optimization of friction stir processing parameters; a study on aluminium 2024-T3 alloy10.1016/j.matdes.2014.09.005 ↗
16. Higginson · 2003 · 82
17. Microstructure strengthening mechanisms in different equal channel angular pressed aluminum alloys10.1016/j.msea.2012.09.086 ↗
18. Davis · 1993
19. Hall-Petch analysis for temperature and strain rate dependent deformation of polycrystalline lead10.1134/S1029959916010045 ↗
20. A model for precipitation kinetics and strengthening in Al-Cu-Mg alloys10.1016/j.msea.2007.03.033 ↗
21. Microstructure stability during creep of friction stir welded AA2024-T3 alloy10.1007/s11665-017-3122-8 ↗
22. Five-power-law creep in single phase metals and alloys
23. Creep of particle-strengthened alloys
24. Particle threshold stresses in high temperature yielding and creep: a critical review
25. A new model-based equation for dispersion strengthened materials10.1016/0956-7151(90)90223-4 ↗
26. Microstructure and creep properties of dispersion-strengthened aluminum alloys10.1007/BF02647335 ↗
27. Hardness-Yield strength relation of Al-Mg-Si alloys10.1088/1757-899X/338/1/012011 ↗