journal article·2019-02

Influence of melting current pulse duration on microstructural features and mechanical properties of AA5083 alloy weldments

Mustafa Umar, Paulraj Sathiya

Publisher page

Abstract

Abstract The formation of intermetallic particles and dislocation structure play a vital role in strengthening aspects of non-heat treatable aluminium alloy weldments. In this work, the effect of melting current pulse duration (McT) on grain boundary characteristics, dislocation structure, size and distribution of intermetallics on AA5083-H111 aluminium alloy weldments processed by pulsed gas tungsten arc welding are investigated. The mechanical responses of the weldments are evaluated by impression creep test, tensile test and microhardness measurements. The results suggest that at both lower and higher current level, the use of shorter McT (40%) had retained a considerable amount of Mg at fusion zone and assisted in nucleation of β-phase precipitates at various sites of grain boundaries whereas the change in McT from 40% to 60% produced grain boundaries free of β-phase precipitates. Also, the longer McT (60%) at a lower current level produced rod-like finer (~50–400 nm) Mn-rich intermetallics at grain boundaries and distributed uniformly at grain interiors. It caused a rise in activation energy which leads to an increase in pinning pressure during plastic deformation and resulted in higher tensile strength and creep resistance. In contrast, the longer McT (60%) at a higher current level encouraged the formation of plate-like coarser (~527 nm length and 419 nm width) Mn-rich intermetallics at random locations allowed the grain boundaries to slide at various points during deformation and resulted in lower mechanical properties. This study shows that the change in McT caused significant variations in mechanical properties by altering the microstructural features of weldments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Microstructure characterization in cryomilled Al 508310.1016/j.msea.2006.05.039 ↗
2. Precipitation behavior of the β phase in Al-508310.1016/j.msea.2009.10.007 ↗
3. Superplastic behavior of an Al-Mg alloy at elevated temperatures10.1016/S0921-5093(02)00276-9 ↗
4. Transmission Electron Microscopic Investigations of Grain Boundary Beta Phase Precipitation in Al 5083 Aged at 373 K (100 °C)10.1007/s11661-012-1166-9 ↗
5. The role of grain boundary plane orientation in the β phase precipitation of an Al–Mg alloy10.1016/j.scriptamat.2014.07.003 ↗
6. Characterization of the effects of different tempers and aging temperatures on the precipitation behavior of Al-Mg (5.25 at%)-Mn alloys10.1016/j.matdes.2017.01.021 ↗
7. Behavior of β phase (Al3Mg2) in AA 5083 during friction stir welding10.1016/j.intermet.2012.12.004 ↗
8. Study of β precipitation and layer structure formation in Al 5083: the role of dispersoids and grain boundaries10.1016/j.jallcom.2017.01.360 ↗
9. Investigation of pre-existing particles in Al 5083 alloys10.1016/j.jallcom.2017.12.329 ↗
10. Formation of intermetallic compounds in Al and Mg alloy interface during friction stir spot welding10.1016/j.intermet.2010.08.030 ↗
11. Modern technologies of welding aluminium and its alloys10.1080/09507116.2012.708478 ↗
12. Influence of filler wire diameter on mechanical and corrosion properties of AA5083-H111 Al–Mg alloy sheets welded using an AC square wave GTAW process10.1007/s12666-018-1331-y ↗
13. Heat input analysis of variable polarity arc welding of aluminum10.1007/s00170-015-7292-y ↗
14. TIG welding of aluminium10.1080/09507119009453028 ↗
15. Microstructure and mechanical properties of aluminum 5083 weldments by gas tungsten arc and gas metal arc welding10.1016/j.msea.2012.03.108 ↗
16. Taguchi optimization of pulsed current GTA welding parameters for improved corrosion resistance of 5083 aluminum welds10.1007/s11665-012-0346-5 ↗
17. Optimisation of pulse frequency in pulsed current gas tungsten arc welding of aluminium–lithium alloy sheets10.1179/mst.1998.14.1.61 ↗
18. Effect of welding parameters on mechanical properties and optimization of pulsed TIG welding of Al-Mg-Si alloy10.1007/s00170-008-1572-8 ↗
19. Influence of grain size on mechanical properties of aluminium GTA weld metal
20. Controlling weld metal dilution for optimised weld performance in aluminium10.1179/stw.1997.2.6.275 ↗
21. Welding of dissimilar aluminium alloys10.1016/S0924-0136(00)00415-5 ↗
22. Microstructure and hardness of Al-Mg-Si weldments produced by pulse GTA welding10.1007/s00170-006-0849-z ↗
23. AC–GTAW of aluminium – new perspective for evaluation of role of positive polarity time10.1179/136217110X12813393169570 ↗
24. Creep behavior in near-nanostructured Al 5083 alloy10.1016/j.msea.2005.08.003 ↗
25. Creep behavior and wear resistance of Al 5083 based hybrid composites reinforced with carbon nanotubes (CNTs) and boron carbide (B4C)10.1016/j.jallcom.2015.07.214 ↗
26. Control of second-phase particles in the Al-Mg-Mn alloy AA 508310.1016/j.jallcom.2016.08.070 ↗
27. The microstructure and impression creep behavior of cast AZ80 magnesium alloy with yttrium additions10.1016/j.matdes.2012.02.036 ↗
28. Strengthening mechanisms in an Al-Mg alloy10.1016/j.msea.2009.11.056 ↗
29. Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloy10.1016/j.msea.2006.12.079 ↗