journal article·2019-02

Strain rate dependent dynamic mechanical response of bainitic multiphase steels

Behnam Shakerifard, Jesus Galan Lopez, Mari Carmen Taboada Legaza, Patricia Verleysen, Leo A.I. Kestens

Publisher page

Abstract

Abstract Bainitic steels, as a third generation of advanced high strength steels, are potential steel grades for automotive applications. Two grades of bainitic steels with low and high silicon content, with three different thermal treatments per grade and therefore different second phase constituents, are examined under quasi-static and high strain rate deformations. Microstructures are studied by advanced characterization techniques, including X-ray diffraction and scanning electron microscope equipped with an electron backscatter diffraction detector. Subsequently, the quasi-static and dynamic mechanical responses of the steels are correlated to the microstructures. A positive effect of the strain rate is observed for all the examined materials: when the strain rate is increased, both the tensile stress and deformation levels increase, thus also the energy absorption capacity. However, it is shown that the higher the fraction of second phase constituents, the lower the effect of strain rate becomes. In addition, the grain size directly correlates to the strain rate effect too. The phenomenological hardening model of Johnson-Cook is used to simulate the quasi-static and dynamic flow behaviors, allowing to quantify the strain rate sensitivity for each material. A comprehensive literature survey on the strain rate sensitivity of various steel grades reveals that steels with higher strength demonstrate a lower strain rate sensitivity factor. This trend can be approximated by a power law function which clearly is followed by the materials under consideration in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Recent developments in advanced high strength sheet steels for automotive applications-an overview
2. Advanced high strength steels for automotive industry: a review10.1016/S1644-9665(12)60197-6 ↗
3. Design of cold rolled and continuous annealed carbide-free bainitic steels for automotive application10.1016/j.matdes.2013.02.046 ↗
4. Design of Novel High-strength Bainitic Steels
5. Design of novel high strength bainitic steels: part 110.1179/026708301101510348 ↗
6. Design of novel high strength bainitic steels: part 210.1179/026708301101510357 ↗
7. Effects of morphology and stability of retained austenite on the ductility of TRIP-aided bainitic steels10.2355/isijinternational.48.1256 ↗
8. A new effect of retained austenite on ductility enhancement in high strength bainitic steel10.1016/j.msea.2012.05.042 ↗
9. High rate constitutive modeling of aluminium alloy tube
10. Electromagnetic forming of aluminum alloy sheet: free-form and cavity fill experiments and model10.1016/j.jmatprotec.2005.04.118 ↗
11. Effect of strain rate on the forming behaviour of sheet metals10.1016/j.jmatprotec.2011.03.018 ↗
12. Dynamic response of aluminium containing TRIP steel and its constituent phases10.1016/j.msea.2007.01.075 ↗
13. Tensile deformation behavior of cold-rolled TRIP-aided steels over large range of strain rates10.1016/j.msea.2007.02.126 ↗
14. On the strain rate sensitivity of aluminum-containing transformation-induced plasticity steels: Interplay between TRIP and TWIP effects10.1016/j.msea.2017.11.055 ↗
15. Effects of the strain rate on the tensile properties of a TRIP-aided duplex stainless steel10.1016/j.msea.2016.04.047 ↗
16. Mechanical behavior and microstructural evolution of nanostructured bainite under high-strain rate deformation by Hopkinson bar10.1016/j.scriptamat.2015.12.013 ↗
17. Experimental study on high strain rate behavior of high strength 600–1000 MPa dual phase steels and 1200 MPa fully martensitic steels10.1016/j.matdes.2012.12.068 ↗
18. Rate-dependent behavior and constitutive model of DP600 steel at strain rate from 10(-4) to 10(3) s(−1)10.1016/j.matdes.2008.10.001 ↗
19. Microstructure and dynamic material performance of high strength and ultra high strength strip steels10.1179/174328407X158406 ↗
20. Effect of strain rate on flow stress and anisotropy of DP600, TRIP780, and AA5182-O sheet metal alloys10.1016/j.ijimpeng.2015.09.006 ↗
21. G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures, in: Proceedings of the 7th International Symposium on Ballistics, The Hague, 1983, pp. 541–547.
22. Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates10.1016/j.msea.2008.11.050 ↗
23. Strain rate dependent tensile behavior of advanced high strength steels: experiment and constitutive modeling10.1016/j.msea.2012.08.087 ↗
24. Phase-based constitutive modeling and experimental study for dynamic mechanical behavior of martensitic stainless steel under high strain rate in a thermal cycle10.1016/j.mechmat.2016.08.003 ↗
25. Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: experiments and modeling10.1016/j.ijplas.2014.01.003 ↗
26. Constitutive equations for multiphase TRIP steels at high rates of strain
27. A critical review of experimental results and constitutive models for bcc and FCC metals over a wide range of strain rates and temperatures10.1016/S0749-6419(99)00021-2 ↗
28. Integrated experimental-simulation analysis of stress and strain partitioning in multiphase alloys10.1016/j.actamat.2014.07.071 ↗
29. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations10.1016/j.ijplas.2014.06.004 ↗
30. The effect of crystallographic orientation on the micromechanical deformation and failure behaviors of DP980 steel during uniaxial tension10.1016/j.ijplas.2012.11.013 ↗
31. Bainite in silicon steels - new composition property approach .110.1179/030634583790420600 ↗
32. Kuhn · 2000
33. Influence of specimen geometry on split Hopkinson tensile bar tests on sheet materials10.1007/s11340-008-9149-x ↗
34. Bhadeshia · 2001
35. Determination of temperature rise during high strain rate deformation10.1016/S0167-6636(97)00036-7 ↗
36. Bouquerel · 2008
37. Ultra-high-strength bainitic steels10.2355/isijinternational.45.1736 ↗
38. Estimation of dislocation density in bainitic microstructures using high-resolution dilatometry10.1016/j.scriptamat.2009.07.013 ↗
39. Effect of banding on micro-mechanisms of damage initiation in bainitic/martensitic steels10.1016/j.msea.2018.08.049 ↗
40. Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate10.1016/j.actamat.2010.05.049 ↗
41. Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel10.1016/j.msea.2017.11.017 ↗
42. The effect of the strain rate on the stress- strain curve and microstructure of AHSS10.1016/j.jmatprotec.2016.11.023 ↗
43. Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals10.1016/j.msea.2004.03.064 ↗
44. Effects of nanocrystalline and ultrafine grain sizes on constitutive behavior and shear bands in iron10.1016/S1359-6454(03)00169-1 ↗