Stress state-dependent mechanics of additively manufactured 304L stainless steel: Part 2 – Characterization and modeling of macroscopic plasticity behavior
Source abstract
Abstract
Abstract A model that describes macroscopic plasticity behavior of additively manufactured 304L stainless steel, in terms of its stress state-dependent microstructural austenite-to-α’ martensite phase transformation is developed. Specifically, a stress state-, texture-, and chemistry-dependent strain-induced martensitic transformation kinetics equation was coupled to an isotropic hardening law in order to explicitly link the macroscopic strain hardening behavior in this material to its microstructural evolution. The plasticity model was implemented into a finite element code, calibrated using experimental data under uniaxial tension, uniaxial compression, pure shear, and validated using experimental data under combined tension and shear loading. The simulated results were in good agreement with the corresponding experimental data for all stress states studied for calibration and validation, demonstrating the predictiveness of the plasticity model developed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Laser additive manufacturing of metallic components: materials, processes and mechanisms10.1179/1743280411Y.0000000014 ↗
2. A review of laser fabrication of metallic engineering components and of materials10.1179/174328407X179593 ↗
3. ASTM F2792 · 2012
4. Review of mechanical properties of Ti-6Al-4V made by laser- based additive manufacturing using powder feedstock10.1007/s11837-015-1759-z ↗
5. Stress relaxation in a nickel-base superalloy at elevated temperatures via in situ neutron diffraction characterization: application to additive manufacturing10.1016/j.msea.2017.12.058 ↗
6. Stress relaxation behavior and mechanisms in Ti-6Al-4V determined via in situ neutron diffraction: application to additive manufacturing10.1016/j.msea.2017.09.071 ↗
7. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
8. Microstructure and mechanical behavior of 17-4 precipitation hardenable steel processed by selective laser melting10.1007/s11665-014-1226-y ↗
9. The microstructure and mechanical properties of deposited-IN718 by selective laser melting10.1016/j.jallcom.2011.10.107 ↗
10. In situ neutron diffraction study of the influence of microstructure on the mechanical response of additively manufactured 304L stainless steel
11. Absence of dynamic strain aging in an additively manufactured nickel-base superalloy10.1038/s41467-018-04473-5 ↗
12. The status, challenges, and future of additive manufacturing in engineering
13. Additive manufacturing of metallic components – process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
14. Characterization of stainless steel parts by laser metal deposition shaping10.1016/j.matdes.2013.09.006 ↗
15. Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers10.1016/j.matdes.2013.10.016 ↗
16. Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V10.1016/j.msea.2017.09.017 ↗
17. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
18. Understanding the deformation behavior of 17-4 precipitate hardenable stainless steel produced by direct metal laser sintering using micropillar compression and TEM10.1007/s00170-016-9367-9 ↗
19. Study of mechanical properties of AISI 316 stainless steel processed by “selective laser melting”, following different manufacturing strategies10.1007/s00170-010-2631-5 ↗
20. Laser metal deposition of Inconel 625: microstructure and mechanical properties10.2351/1.4757717 ↗
21. M.L. Griffith, D.M. Keicher, C.L. Atwood, J.A. Romero, E. Smugeresky, L.D. Harwell, D.L. Greene, J.E. Smugeresky, L.D. Harwell, D.L. Greene, Free form fabrication of metallic components using laser engineered net shaping (LENS™), in: Proceedings of the 7th Solid Free. Fabr. Symp., Austin, TX, 1996, pp. 125–132 〈http://dx.doi.org/10.4028/www.scientific.net/AMR.15-17.175〉.10.4028/www.scientific.net/AMR.15-17.175 ↗
22. M.L. Griffith, M.T. Ensz, J.D. Puskar, C.V. Robino, J.A. Brooks, J.A. Philliber, E. Smugeresky, J.E. Smugeresky and W.H. Hofmeister, Understanding the microstructure and properties of components fabricated by laser engineered net shaping (LENS), in: Mater. Res. Soc. Symp. 2000, pp. 9–20 〈https://doi.org/10.1557/PROC-625-9〉.10.1557/PROC-625-9 ↗
23. Cracking behavior and mechanical properties of austenitic stainless steel parts produced by laser metal deposition10.1016/j.matdes.2012.08.078 ↗
24. Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel10.1016/j.optlastec.2012.07.002 ↗
25. Martensitic transformations induced by plastic-deformation in Fe-Ni-Cr-C system
26. Criterion for the action of applied stress in the martensitic transformation10.1016/0001-6160(53)90083-2 ↗
27. Evaluation of associated and non-associated quadratic plasticity models for advanced high strength steel sheets under multi-axial loading10.1016/j.ijplas.2009.11.006 ↗
28. Experimental study of the phase transformation plasticity of 16MND5 low carbon steel under multiaxial loading10.1016/S0749-6419(01)00067-5 ↗
29. Formation of martensite in austenitic stainless steels, effect of deformation, temperature and composition
30. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
31. Mathematical modelling of transformation plasticity in steels II: coupling with strain hardening phenomena10.1016/0749-6419(89)90002-8 ↗
32. A self-consistent model of isotropic viscoplastic behavior in multiphase materials10.1016/0749-6419(91)90043-X ↗
33. Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation10.1016/j.actamat.2010.12.040 ↗
34. Metastable austenite driven work-hardening behaviour in a TRIP-assisted dual phase steel10.1016/j.ijplas.2016.10.005 ↗
35. Compatible strain evolution in two phases due to epsilon martensite transformation in duplex TRIP-assisted stainless steels with high hydrogen embrittlement resistance10.1016/j.ijplas.2016.09.012 ↗
36. New view on transformation induced plasticity (TRIP)10.1016/S0749-6419(99)00078-9 ↗
37. A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels10.1016/0956-7151(92)90114-T ↗
38. Transformation potential predictions for the stress-induced austenite to martensite transformation in steel10.1016/j.actamat.2009.08.059 ↗
39. Model for the kinetics of strain-induced martensitic phase transformation at non-isothermal conditions for the simulation of sheet metal forming processes with metastable austenitic steels
40. Large deformation of anisotropic austenitic stainless steel sheets at room temperature: multi-axial experiments and phenomenological modeling10.1016/j.jmps.2008.07.003 ↗
41. Anisotropic plasticity model coupled with Lode angle dependent strain-induced transformation kinetics law10.1016/j.jmps.2012.06.009 ↗
42. A micromechanical modeling of the Greenwood-Johnson mechanism in transformation induced plasticity10.1016/S0749-6419(03)00020-2 ↗
43. Behaviour model of austenitic stainless steels for automotive structural parts10.1002/srin.200606448 ↗
44. A constitutive model for the formation of martensite in austenitic steels under large strain plasticity10.1016/j.ijplas.2006.11.002 ↗
45. A macroscopic constitutive model for a metastable austenitic stainless steel10.1016/j.msea.2007.07.084 ↗
46. A theoretical and numerical approach to the plastic behaviour of steels during phase transformations-II. Study of classical plasticity for ideal-plastic phases10.1016/0022-5096(86)90010-4 ↗
47. An energy criterion for the stress-induced martensitic transformation in a ductile system10.1016/0022-5096(94)90068-X ↗
48. Finite element modelling of TRIP steels10.1002/srin.200405835 ↗
49. Constitutive modeling and finite element methods for TRIP steels10.1016/j.cma.2005.09.026 ↗
50. Modeling large strain multiaxial effects in FCC polycrystals10.1016/S0749-6419(96)00032-0 ↗
51. Couplings between plasticity and martensitic phase transformation: overall behavior of polycrystalline TRIP steels10.1016/S0749-6419(00)00008-5 ↗
52. A theory of the yielding and plastic flow of anisotropic metals10.1098/rspa.1948.0045 ↗
53. Stress state-dependent mechanics of additively manufactured 304L stainless steel: Part1 – characterization and modeling of the effect of stress state and texture on microstructural evolution
54. Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing10.1016/j.actamat.2016.03.019 ↗
55. ASTM A479/A479M · 2015
56. ASTM E8/E8M-16a · 2016
57. Effect of chemistry on martensitic phase transformation kinetics and resulting properties of additively manufactured stainless steel10.1016/j.actamat.2017.04.022 ↗
58. Virtual strain gage size study
59. First in situ lattice strains measurements under load at VULCAN10.1007/s11661-010-0495-9 ↗
60. Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel10.1016/j.actamat.2013.11.012 ↗
61. Temperature-dependent elastic anisotropy and mesoscale deformation in a nanostructured ferritic alloy10.1038/ncomms6178 ↗
62. A new experimental technique for the multi-axial testing of advanced high strength steel sheets10.1007/s11340-007-9053-9 ↗
63. ABAQUS, Version 6.14 User’s Manual, 2014.
64. Plastic instability under plane stress10.1016/0022-5096(52)90002-1 ↗
65. A new model of metal plasticity and fracture with pressure and Lode dependence10.1016/j.ijplas.2007.09.004 ↗