Evaluation of mechanical properties of irradiated zirconium alloys in the vicinity of the metal-oxide interface
Source abstract
Abstract
Abstract The mechanical properties of oxides play an important role on the protection of underlying metals from further oxidation. Such properties should be examined to provide further mechanistic understanding of oxidation phenomena. This paper presents a novel method for determining the mechanical properties of material at the two sides of the metal-oxide (M/O) interface. It is applied to Zircaloy-2 cladding from a boiling water reactor. Two samples irradiated for 3 and 9 years have been examined. Micropillars were fabricated in the vicinity of M/O interface in the oxide, metal, and transition region using focused ion beam (FIB). The pillars were then uniaxially compressed using nano-indentation. Results prove the ability to pinpoint and consistently measure Young's modulus and yield strength of specific regions around the M/O interface. The Young's modulus and yield strength of metal and oxide regions for the two Zircaloy-2 samples are reported.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear reactor physics and engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. International Atomic Energy Agency. Long Term Storage of Spent Nuclear Fuel – Survey and Recommendations: Final Report of a Co-ordinated Research Project.
2. Delayed hydrogen embrittlement in Zr-2.5 wt% Nb10.1016/0022-3115(74)90174-3 ↗
3. The oxidation of metals at high temperatures
4. S. Abolhassani, G. Bart, J. Bertsch, M. Grosse, L. Hallstadius, A. Hermann, G. Kuri, G. Ledergerber, C. Lemaignan, M. Martin, S. Portier, C. Proff, R. Restani, S. Valance, S. Valizadeh, H. Wiese; Corrosion and hydrogen uptake in zirconium claddings irradiated in light water reactors; in: Proceedings of the 17th ASTM International Symposium on Zirconium in the Nuclear Industry, STP 1543, (2015), pp. 540-573.10.1520/STP154320130007 ↗
5. A. Baris, S. Abolhassani, Y.L. Chiu, H.E. Evans, Observation of crack microstructure in oxides and its correlation to oxidation and hydrogen-uptake by 3D FIB tomography – case of Zr-ZrO2 in reactor, Materials at High Temperatures, 35 (1–3), 2017, 14-21.10.1080/09603409.2017.1392412 ↗
6. Chemical and microstructural characterization of a 9-cycle Zircaloy-2 cladding using EMPA and FIB topography10.1016/j.jnucmat.2018.01.065 ↗
7. Hydrogen pickup measurements in zirconium alloys: relation to oxidation kinetics10.1016/j.jnucmat.2014.03.001 ↗
8. Characterization of high burnup fuel for safety related fuel testing10.1080/18811248.2006.9711189 ↗
9. G. Ledergerber, S. Valizadeh, J. Wright, L. Hallstadius, D. Gavillet, F. Nagase, T. Sugiyama, W. Wiesenack, T. Tverberg; S. Abolhassani, Fuel performance beyond design – exploring the limits, in: Proceedings of 2010 LWR Fuel Performance/Top Fuel/WRFRM, American Nuclear Society, Orlando, FL, Sept 26–29, 2010, pp. 513-524.
10. S. Valizadeh, G. Ledergerber, S. Abolhassan, D. Jädernäs, M. Dahlbäck, E.V.G. Mader, G. Zhou, J. Wright, L. Hallstadius, Effects Proceedings of the secondary phase particle dissolution on the in-reactor performance of BWR cladding, in: Proceedings of the 16th Symposium on Zirconium in the Nuclear Industry, ASTM STP 1529, ASTM International, West Conshohocken, PA, 2011, pp. 729-753.10.1520/STP49281T ↗
11. The development of the Zircaloys
12. Size effects in the deformation of sub-micron Au columns10.1080/14786430600567739 ↗
13. Transmission electron microscopy examination of oxide layers formed on Zr alloys10.1016/j.jnucmat.2005.10.012 ↗
14. The design of accurate micro-compression experiments10.1016/j.scriptamat.2005.06.043 ↗
15. M.T.S. Systems, Corporation Technical Staff, User Manua Nano Indenter G200, MTS Systems Corporation, 2007.
16. Application of Hertzian tests to measure stress–strain characteristics of ceramics at elevated temperatures10.1111/j.1551-2916.2006.01339.x ↗
17. Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses, In10.1016/j.jeurceramsoc.2016.11.043 ↗
18. S. Yagnik, A. Hermann, R. Kuo, Ductility of Zircaloy-4 Fuel Cladding and Guide Tubes at High Fluences, Proceeding of 14th International Symposium on Zirconium in the Nuclear Insdustry, STP1467, ASTM International, West Conshohcken, PA, 2005, 2, (5), pp.604-631.10.1520/STP37527S ↗
19. Investigation of elevated-temperature mechanical properties of δ-hydride precipitate in Zircaloy-4 fuel cladding tubes using nanoindentation10.1016/j.jallcom.2017.07.321 ↗
20. MatWeb, Material property data 〈http://www.matweb.com/search/datasheet.aspx?Matguid=eb1dad5ce1ad4a1f9e92f86d5b44740d&ckck=1〉 (Accessed 13 November 2017).
21. Mechanical properties of monoclinic zirconia10.1111/j.1151-2916.2004.tb07748.x ↗
22. Zirconia (Zirconium Dioxide, ZrO2) 〈https://www.makeitfrom.com/material-properties/Zirconia-Zirconium-Dioxide-ZrO2〉 (Accessed 13 November 2017).
23. Kingery · 1976 · 776
24. Effect of porosity on physical properties of sintered-alumina10.1111/j.1151-2916.1956.tb15608.x ↗
25. Small-scale mechanical testing on nuclear materials: bridging the experimental length-scale gap10.1016/j.scriptamat.2017.04.026 ↗
26. S. Abolhassani, R. Restani, T. Rebac, F. Groeschel, W. Hoffelner, G. Bart, W. Goll, F. Aeschbach, "TEM examinations of the metal-oxide interface of zirconium based alloys irradiated in a pressurized water reactor," in: R.P., K.B. (Eds) Proceedings of the Fourteenth International Symposium STP37521S Zirconium in the Nuclear Industry, ASTM International, West Conshohocken, PA, 2005, pp. 467–493.10.1520/STP37521S ↗
27. IAEA Technical Staff, Grain size determination in zirconium alloys, Report IAEA-TECDOC-794 International Atomic Agency, Vienna, Austria, 1995.
28. Nanoindentation response of an ion irradiated Zr-based bulk metallic glass10.1016/j.msea.2011.11.004 ↗