journal article·2018-01

Effect of thermal cycle shocking on microstructure and mechanical properties of Stellite 12 (Co-29Cr-2.3C-3W) cobalt based alloy

R. Cao, H.Y. Zhang, G.H. Liu, H.Y. Che, J.H. Chen

Publisher page

Abstract

Abstract In order to investigate the effects of thermal cycle shocking on microstructures and mechanical properties of Stellite 12 Cobalt based alloy, the thermal shocking with various cycles of 1, 15, 30, 45…150 cycles at the peak temperatures of 650 °C, 700 °C and 800 °C were performed, and the corresponded microstructure characterization, tensile, bending and hardness experiments after the thermal shocking with various cycles at various temperatures were systematically investigated. Results indicated that the microstructure and hardness have not changed after the thermal cycle shocking processes, the tensile strength and flexure strength decrease with the increase of thermal shocking cycles, when thermal shocking cycles reaches 105 cycles, the flexural strength decreases to 30% of original flexure strength, which is attributed to the 23~30% cracking areas produced during thermal cycle shocking processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Titanium Alloys Microstructure and Properties · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Some aspects of the structure of cobalt and nickel binder phases in hardmetals10.1016/j.actamat.2010.12.004 ↗
2. Constitutive behaviour of WC-Co materials with different grain size sintered under load10.1016/j.actamat.2003.12.024 ↗
3. Defect structure induced by iron injection in WC-Co10.1016/j.scriptamat.2007.11.026 ↗
4. The effect of thermal property degradation on wear of WC-Co inserts in dry cutting10.1016/j.wear.2008.04.004 ↗
5. Cemented carbide cutting tool: Laster processing and thermal stress analysis10.1016/j.apsusc.2006.12.123 ↗
6. Performance of cemented carbides in cyclic loading wear conditions10.4028/www.scientific.net/MSF.534-536.1221 ↗
7. Strength and failure of TiC based cermets10.1179/174329008X315575 ↗
8. Wear behavior, durability, and cyclic strength of TiC base cermets10.1179/026708304225022043 ↗
9. Microstructure and mechanical properties of ultrafine-grained hardmetals10.1016/S0263-4368(01)00041-5 ↗
10. Composition and properties of (Ti, W) C-WC-Co sintered carbides alloyed by MMT-process10.1016/0263-4368(95)00025-E ↗
11. HUANG Chuan-zhen. research and development of rare-earth cemented carbides10.1016/S0263-4368(01)00018-X ↗
12. Energy-based approach to thermal fatigue life of tool steels for die casting dies10.1016/j.ijfatigue.2016.06.016 ↗
13. Numerical simulation of thermal fatigue behavior in a cracked disc of AISI H-11 tool steel10.1016/j.engfailanal.2016.01.015 ↗
14. Influence of thermal shock damage on the flexure strength of alumina ceramic at different temperatures10.1016/j.matlet.2016.03.026 ↗
15. Residual strength degradation of graphite under thermal shock fatigue10.1016/j.ijmecsci.2012.03.004 ↗
16. Thermal shock and thermal fatigue study of sr- and mg-doped lanthanum gallate10.1016/j.ijfatigue.2005.05.008 ↗
17. Oxide spallation mechanisms. Cathcart J V. stress effects and the oxidation of metals