journal article·2018-01

Microstructure and mechanical properties of ultrafine grained Cu-0.8 wt%C alloy with a bimodal microstructure produced by powder metallurgy techniques

Wenjing Wang, Wei Zeng, Chenguang Li, Jiamiao Liang, Deliang Zhang

Publisher page

Abstract

Abstract Bulk ultrafine grained Cu-0.8 wt%C alloy samples were fabricated by spark plasma sintering (SPS) of a nanocrystalline Cu-0.8 wt%C alloy powder prepared by high energy mechanical milling. The SPS temperature was 800 °C. The SPSed samples exhibited a bimodal microstructure consisting of ultrafine and coarse Cu grains (average grain sizes: ~95 nm and ~1 µm respectively) and a yield strength of 483 MPa, but underwent a premature fracture at a stress of 511 MPa with a low elongation to fracture of only 0.3%. It is established that the premature fracture and low tensile ductility are caused by the high flow stress associated with grain boundary strengthening and reaching the strength of IPBs before reaching its maximum. Hot extrusion of the SPSed sample at 800 °C caused substantial growth of the ultrafine Cu grains and enhancement of the strength of IPBs, leading to a clearly lower tensile yield strength of 353 MPa, but mature fracture with an ultimate tensile strength of 428 MPa and a significantly improved elongation to fracture of 6.5%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Ductility of nanostructured materials10.1557/S0883769400051551 ↗
2. Instabilities and ductility of nanocrystalline and ultrafine-grained metals10.1016/S1359-6462(03)00396-8 ↗
3. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
4. Al–Mg alloy engineered with bimodal grain size for high strength and increased ductility10.1016/S1359-6462(03)00283-5 ↗
5. High strength and ductility in multimodal-structured Zr10.1016/j.matdes.2011.08.002 ↗
6. Plastic deformation and fracture of ultrafine-grained Al–Mg alloys with a bimodal grain size distribution10.1016/j.actamat.2005.11.044 ↗
7. Bimodal grain size distribution: an effective approach for improving the mechanical and corrosion properties of Fe–Cr–Ni alloys10.1007/s10853-012-6686-6 ↗
8. Deformation behavior of an ultrafine-grained Al?Mg alloy at different strain rates10.1016/j.scriptamat.2004.12.028 ↗
9. Synthesis of high-strength bimodally grained iron by mechanical alloying and spark plasma sintering10.1016/j.scriptamat.2007.12.016 ↗
10. Bimodally grained high-strength Fe fabricated by mechanical alloying and spark plasma sintering10.1016/j.actamat.2009.03.034 ↗
11. A high-strength bulk nanocrystalline Al–Fe alloy processed by mechanical alloying and spark plasma sintering10.1016/j.scriptamat.2007.04.010 ↗
12. Microstructure characterization of bulk nanocrystalline Fe–0.8C alloy produced by mechanical milling and spark plasma sintering10.1016/j.msea.2006.12.002 ↗
13. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
14. Spark plasma sintering as advanced PM sintering method10.1179/003258902225007041 ↗
15. Decomposition of process control agent during mechanical milling and its influence on displacement reactions in the Al–TiO2 system10.1016/j.matchemphys.2004.09.014 ↗
16. An investigation of the use of stearic acid as a process control agent in high energy ball milling of Nb-Al and Ni-Al powder mixtures10.4028/www.scientific.net/MSF.416-418.144 ↗
17. Mechanism of neck formation of conductive pure materials during SPS
18. Temperature distribution simulation and neck evolution powder particles during spark plasma sintering
19. Strain hardening, strain rate sensitivity, and ductility of nanostructured metals10.1016/j.msea.2003.10.214 ↗
20. Synthesis, processing, and deformation of bulk nanophase Fe-28Al-2Cr intermetallic10.1016/0956-7151(94)90015-9 ↗
21. An analysis of the strain hardening behavior of ultra-fine grain pure titanium10.1016/j.scriptamat.2006.01.034 ↗
22. A feasible ultrafine grained Cu matrix composite microstructure for achieving high strength and high electrical conductivity10.1016/j.jallcom.2016.04.321 ↗
23. Structure and mechanical properties of ultrafine-grained metals10.1016/S0921-5093(97)00183-4 ↗
24. Meyers · 2005
25. On the effect of grain size on yield stress: extension into nanocrystalline domain10.1016/S0921-5093(00)02029-3 ↗