Fabrication, microstructure and mechanical properties of self-diffusion gradient cermet composite tool materials
Source abstract
Abstract
Abstract Self-diffusion gradient cermet composite tool materials were fabricated by vacuum hot pressing process at different temperatures (from 1450 °C to 1575 °C) for different holding times (from 20 min to 50 min) under 32 MPa. A new subsurface layer enriched with metal binder was formed due to self-diffusion driving force after sintering. The surface layer had a higher hardness, while the substrate had a high flexural strength, as well as the subsurface layer had a good interface bonding strength. The relationships among sintering processes, mechanical properties and microstructure were discussed. The experimental results showed that both the sintering temperature and holding time had a great influence on the flexural strength and fracture toughness, while a relatively small effect on the hardness. For the sintering parameters considered, it was revealed that the sintering temperature of 1500 °C and the holding time of 40 min were in the vicinity of optimum to yield the desired mechanical properties and fine microstructure. Both grain sizes and the rim phase of the Ti(C,N) increased and the Ni content in the substrate decreased when sintering temperature varied from 1450 °C to 1575 °C and holding time varied from 20 min to 50 min. Compared with Ti(C,N)-based cermet, the self-diffusion gradient cermet exhibited better comprehensive mechanical performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Orthopaedic implants and arthroplasty · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Titanium carbonitride-based cermets: processes and properties10.1016/0921-5093(93)90588-6 ↗
2. In situ production of ultra-fine Ti(C,N)–TiB2–Co cermets by reactive hot processing from the Co–Ti–C–BN system10.1016/j.ijrmhm.2015.11.003 ↗
3. The influence of high energy milling and sintering parameters on reactive sintered (Ti,Mo)C–Ni cermets10.1016/j.jallcom.2015.02.071 ↗
4. Microstructure and mechanical properties of TiB2–TiC–WC composite ceramic tool materials10.1016/j.matdes.2011.11.011 ↗
5. TiC–TiB2 composites: a review of phase relationships, processing and properties10.1016/j.jeurceramsoc.2007.11.011 ↗
6. Development of TiCN-based cermets: mechanical properties and wear mechanism10.1016/j.ijrmhm.2012.07.001 ↗
7. Cermets: I, fundamental concepts related to micro-structure and physical properties of cermet systems10.1111/j.1151-2916.1956.tb15624.x ↗
8. Effect of WC on the microstructure and mechanical properties of nano Ti(C,N)-based cermets10.1016/j.ijrmhm.2012.05.009 ↗
9. Effect of NbC on the microstructure and sinterability of Ti(C0.7, N0.3)-based cermets10.1016/j.ijrmhm.2008.07.003 ↗
10. Effect of VC and nano-TiC addition on the microstructure and properties of micrometer grade Ti(CN)-based cermets10.1016/j.matdes.2008.08.017 ↗
11. Ultrafine (Ti, M)(C, N)-based cermets with optimal mechanical properties10.1016/j.ijrmhm.2010.08.007 ↗
12. Effect of ZrB2 and SiC addition on TiB2-based ceramic composites prepared by spark plasma sintering10.1016/j.ijrmhm.2014.05.019 ↗
13. Mechanical properties and microstructure of TiB2–TiC composite ceramic cutting tool material10.1016/j.ijrmhm.2012.02.011 ↗
14. Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2 ceramics10.1016/S0955-2219(01)00424-1 ↗
15. Effects of TiC content and melt phase on microstructure and mechanical properties of ternary TiB2-based ceramic cutting tool materials10.1016/j.msea.2014.03.036 ↗
16. Effect of (Ni, Mo) and TiN on the microstructure and mechanical properties of TiB2 ceramic tool materials10.1016/j.msea.2006.07.012 ↗
17. Effect of Ni content on microstructures and mechanical properties of hot-pressed TiC–TiB2–Ni composite10.1016/j.msea.2016.05.053 ↗
18. Effects of heating rate and metal binder on the microstructure and mechanical properties of self-diffusion gradient cermet composite tool materials10.1016/j.jallcom.2016.03.237 ↗
19. Formation of core/rim structures in Ti(C,N)-WC-Ni cermets via a dissolution and precipitation process10.1111/j.1151-2916.2000.tb01415.x ↗
20. Ostwald ripening and grain growth in Ti(C,N)-based cermets during liquid phase sintering10.1016/j.ijrmhm.2016.03.008 ↗
21. Microstructure and properties of Ti(C,N)–Mo2C–Fe cermets10.1016/j.ijrmhm.2009.01.003 ↗
22. Properties of titanium carbonitride matrix cermets10.1016/j.ijrmhm.2005.05.009 ↗
23. Quantitative characterization of cleavage and hydrogen-assisted quasi-cleavage fracture surfaces with the use of confocal laser scanning microscopy10.1016/j.msea.2016.04.023 ↗
24. Effects of sintering processes on the mechanical properties and microstructure of Ti(C,N)-based cermet cutting tool materials10.1016/j.ijrmhm.2014.06.023 ↗