journal article·2017-01

Fatigue behaviors of high nitrogen stainless steels with different deformation modes

Jun Young Park, Seong-Jun Park, Jun-Yun Kang, Chang-Hoon Lee, Heon-Young Ha, Joonoh Moon, Jae Hoon Jang, Tae-Ho Lee

Publisher page

Abstract

Abstract In this work, high-cycle fatigue property of high nitrogen steels which have different deformation modes was explored. The samples, Fe-18Cr-10Mn-0.4N (0.4N) and Fe-18Cr-10Mn-0.6N (0.6N), were fabricated under different nitrogen partial pressures in order to obtain the different deformation modes by controlling stacking fault energy: Deformation-Induced Martensite Transformation (DIMT) in 0.4N and deformation twins in 0.6N. Owing to solid solution strengthening of nitrogen, the fatigue limit of 0.6N is higher than that of 0.4N. However, a ratio of the fatigue limit to the yield strength of 0.6N is lower than that of 0.4N. This result is ascribed to the different influence of the deformation modes on fatigue damages. The DIMT formed in 0.4N could restrict the path of moving dislocations, and thus the fatigue property was relatively improved with the decrease of the fatigue damages by the DIMT. The deformation twins, on the other hand, were not clearly activated during fatigue of 0.6N, and therefore did not affect the fatigue damages.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Reed · JOM · 1989 · 41 · 1610.1007/BF03220991 ↗
2. Berns · ISIJ Int. · 1996 · 36 · 90910.2355/isijinternational.36.909 ↗
3. Simmons · Mater. Sci. Eng. A · 1996 · 207 · 15910.1016/0921-5093(95)09991-3 ↗
4. Tomota · Acta Mater. · 1998 · 46 · 157710.1016/S1359-6454(97)00350-9 ↗
5. V.G. Gavriljuk, H. Berns, High Nitrogen Steels Nitrogen Steels 1999.10.1007/978-3-662-03760-7 ↗
6. Dai · Mater. Sci. Eng. A · 2009 · 517 · 25710.1016/j.msea.2009.05.006 ↗
7. Bai · Mater. Sci. Eng. A · 2014 · 607 · 57810.1016/j.msea.2014.04.047 ↗
8. Vogt · J. Mater. Process. Technol. · 2001 · 117 · 36410.1016/S0924-0136(01)00799-3 ↗
9. Berns · ISIJ Int. · 1996 · 36 · 92710.2355/isijinternational.36.927 ↗
10. Uggowitzer · ISIJ Int. · 1996 · 36 · 90110.2355/isijinternational.36.901 ↗
11. Hänninen · J. Mater. Process. Technol. · 2001 · 117 · 42410.1016/S0924-0136(01)00804-4 ↗
12. Sumita · Mater. Sci. Eng. C. · 2004 · 24 · 75310.1016/j.msec.2004.08.030 ↗
13. Yoon · Corros. Sci. · 2014 · 88 · 33710.1016/j.corsci.2014.07.048 ↗
14. Byrnes · Acta Metall. · 1987 · 35 · 185310.1016/0001-6160(87)90131-3 ↗
15. Ojima · Steel Res. Int. · 2009 · 80 · 477
16. Gavriljuk · Scr. Mater. · 2006 · 55 · 53710.1016/j.scriptamat.2006.05.025 ↗
17. Lee · Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. · 2012 · 43 · 445510.1007/s11661-012-1423-y ↗
18. Lee · Acta Mater. · 2010 · 58 · 317310.1016/j.actamat.2010.01.056 ↗
19. Olson · J. Less-Common Met. · 1972 · 28 · 10710.1016/0022-5088(72)90173-7 ↗
20. Lee · Acta Mater. · 2013 · 61 · 739910.1016/j.actamat.2013.08.046 ↗
21. Dieter · 1988
22. Colin · J. Eng. Mater. Technol., Trans. ASME · 2010 · 132 · 021008110.1115/1.4000224 ↗
23. Olson · Metall. Trans. A · 1980 · 11 · 106910.1007/BF02654722 ↗
24. Vincent · Int. J. Fatigue · 2012 · 38 · 8410.1016/j.ijfatigue.2011.11.010 ↗
25. Huo · Mater. Charact. · 2005 · 55 · 1210.1016/j.matchar.2005.02.004 ↗
26. Cheng · Eng. Fract. Mech. · 2008 · 75 · 73910.1016/j.engfracmech.2007.01.019 ↗
27. Haidemenopoulos · Mater. Sci. Eng. A · 2013 · 573 · 710.1016/j.msea.2013.02.015 ↗
28. Roa · Mater. Sci. Eng. A · 2014 · 597 · 23210.1016/j.msea.2013.12.044 ↗
29. Wang · Mater. Sci. Eng. A · 2015 · 647 · 24910.1016/j.msea.2015.09.017 ↗
30. Roa · Mater. Sci. Eng. A · 2015 · 628 · 41010.1016/j.msea.2015.01.043 ↗
31. Bouaziz · Curr. Opin. Solid State Mater. Sci. · 2011 · 15 · 14110.1016/j.cossms.2011.04.002 ↗
32. Niendorf · Mater. Sci. Eng. A · 2010 · 527 · 241210.1016/j.msea.2009.12.012 ↗
33. Hamada · Mater. Sci. Eng. A · 2010 · 527 · 571510.1016/j.msea.2010.05.035 ↗
34. Niendorf · Mater. Sci. Eng. A · 2009 · 499 · 51810.1016/j.msea.2008.09.033 ↗
35. Wilson · Met Sci. · 1977 · 11 · 32110.1179/msc.1977.11.8-9.321 ↗
36. Thompson · Acta Metall. · 1971 · 19 · 59710.1016/0001-6160(71)90012-5 ↗
37. ASTM E466-07, Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials, ASTM International, West Conshohocken, USA, 2007.
38. Huang · Mater. Trans. · 2006 · 47 · 40910.2320/matertrans.47.409 ↗
39. Speidel · 2003
40. Forrest · 1962
41. Schmid · 2014
42. Cayron · Acta Mater. · 2010 · 58 · 139510.1016/j.actamat.2009.10.046 ↗
43. Journal de Physique (Paris), Colloque
44. Fujita · Scr. Metall. · 1975 · 9 · 63110.1016/0036-9748(75)90476-7 ↗
45. Byun · Acta Mater. · 2003 · 51 · 306310.1016/S1359-6454(03)00117-4 ↗
46. Wang · Metall. Mater. Trans. A · 2015 · 46 · 331710.1007/s11661-015-3010-5 ↗
47. Klesnil · 1980
48. An · Acta Mater. · 2014 · 74 · 20010.1016/j.actamat.2014.04.053 ↗
49. Li · Acta Mater. · 2013 · 61 · 585710.1016/j.actamat.2013.06.032 ↗