journal article·2016-11

Effects of Cr and Nb addition on high-temperature tensile properties in austenitic cast steels used for turbo-charger application

Seungmun Jung, Seok Su Sohn, Yong Hee Jo, Won-Mi Choi, Byeong-Joo Lee, Yong-Jun Oh, Gi-Yong Kim, Seongsik Jang, Sunghak Lee

Publisher page

Abstract

Abstract In automotive turbo-chargers, excellent high-temperature properties are needed for retaining their structures at extremely high temperature of exhausted gas, and thus austenitic cast steels have been actively developed. In this study, high-temperature tensile properties of austenitic cast steels containing different W, Nb, and Cr were interpreted by deformation and fracture mechanisms related with carbides and austenite matrix. Replacement effects of W by Nb or Cr were also investigated because of expensive alloying cost of W. The high-temperature tensile test results revealed that the Cr-added steel containing many M 7 C 3 carbides showed the higher strength than the Nb-added steel containing hard MC carbides. This was because the strength could be enhanced by distributing carbides having slightly lower hardness such as M 7 C 3 carbides in the strengthened matrix as it could hold hard carbides, like in the Cr-added steel. The Cr-added steel (1 wt% W) also showed the higher strength and elongation at 900 °C than the basic-composition steel (2 wt% W), which indicated that the partly replacement of W by Cr was successfully achieved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Experimental study of inlet manifold water injection on combustion and emissions of an automotive direct injection diesel engine10.1016/j.energy.2010.05.007 ↗
2. Development of a highly efficient low-emission diesel engine-powered co-generation system and its optimization using Taguchi method10.1016/j.applthermaleng.2012.06.040 ↗
3. Development and performance measurement of micro-power pack using micro-gas turbine driven automotive alternators10.1016/j.apenergy.2012.07.014 ↗
4. Economic assessment of greenhouse gas emissions reduction by vehicle lightweighting using aluminum and high-strength steel10.1111/j.1530-9290.2010.00288.x ↗
5. Is there an environmental advantage of using magnesium components for light-weighting cars?10.1016/j.jclepro.2006.05.022 ↗
6. Downsizing of gasoline engine: an efficient way to reduce CO2 emissions10.2516/ogst:2003008 ↗
7. Effects of T-6 treatment on the defect susceptibility of tensile strength to microporosity variation in low pressure die-cast A356 alloy10.1007/s12540-015-5247-3 ↗
8. Microstructural analysis of cracking phenomenon occurring during cold rolling of (0.1~0.7)C-3Mn-5Al lightweight steels10.1007/s12540-015-1006-8 ↗
9. High temperature low cycle fatigue properties of a HF30-type cast austenitic stainless steel10.1016/j.msea.2009.07.044 ↗
10. Low cycle fatigue behavior of blanket structural materials10.1016/0022-3115(79)90364-7 ↗
11. Thermomechanical fatigue of 1.4849 cast steel – experiments and life prediction using a fracture mechanics approach10.3139/146.110363 ↗
12. Creep behavior of a new cast austenitic alloy10.1016/j.ijpvp.2006.09.014 ↗
13. Development of heat-resistant cast steel for exhaust manifolds
14. Improvement of high-temperature oxidation resistance and strength in alumina-forming austenitic stainless steels10.1016/j.matlet.2011.07.021 ↗
15. P.Y. Chen, R. Lyons, M. Rakoczy, K. Otsuka, H. Yamanaka, T. Mimata, Development of the 6.8L V10 heat resisting cast-steel exhaust manifold, SAE 1996, World Congress, Detroit, MI,1996, (Paper no. 962169).10.4271/962169 ↗
16. Honeycombe · 1981
17. Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors10.1179/174328005X41140 ↗
18. Atmospheric oxidation of Fe-16Cr-6Ni-6Mn-1.7Mo stainless steel between 700 and 900°C
19. Steam oxidation resistance of new 12% Cr steels: comparison with some other ferritic steels10.1016/j.corsci.2007.11.033 ↗
20. Effect of Nb and Ti additions on microstructure, and identification of precipitates in stabilized Ni-Cr cast austenitic steels10.1016/S1044-5803(01)00166-8 ↗
21. Niobium additions in HP heat-resistant cast stainless steels10.1016/1044-5803(92)90045-J ↗
22. Effects of alloying elements on microstructure and fracture properties of cast high speed steel rolls part I: microstructural analysis10.1016/S0921-5093(98)00626-1 ↗
23. Effects of tungsten and molybdenum on high-temperature tensile properties of five heat-resistant austenitic stainless steels10.1016/j.msea.2016.01.022 ↗
24. High temperature mechanical properties of HK40-type heat-resistant cast austenitic stainless steels10.1007/s11665-009-9550-3 ↗
25. Development of 18Cr-9Ni-W-Nb-V-N austenitic stainless steel tube for thermal power boilers10.1299/jsmea.45.110 ↗
26. Microstructural characterization of modified 25Cr–35Ni centrifugally cast steel furnace tubes10.1016/S1044-5803(03)00013-5 ↗
27. Microstructures and mechanical properties of Fe-15%Cr-15%Ni austenitic stainless steels containing different levels of niobium additions submitted to various processing stages10.1016/j.jmatprotec.2005.05.002 ↗
28. Microstructure evolution during continuous cooling in niobium microalloyed high carbon steels10.1007/s12540-014-5001-2 ↗
29. Microstructural and precipitation characterization in Nb-Mo microalloyed steels: estimation of the contributions to the strength10.1007/s12540-014-5002-1 ↗
30. High-temperature mechanical- and fatigue properties of cast alloys intended for use in exhaust manifolds10.1016/j.msea.2014.08.014 ↗
31. Precipitation of NbC and hot ductility of austenitic stainless steels10.2320/matertrans1960.25.160 ↗
32. Composition, microstructure, hardness, and wear properties of high-speed steel rolls10.1007/s11661-999-0329-9 ↗
33. Effect of alloying elements on the mechanical properties of the stable austenitic stainless steel10.2355/isijinternational.34.764 ↗
34. Microstructural basis for the effect of chromium on the strength and toughness of AF1410-based high performance steels10.1007/BF02652345 ↗
35. Effect of heat treatment on hardness and corrosion resistance of super cast iron, Korean10.3365/KJMM.2014.52.7.511 ↗
36. Effect of intermetallic precipitation on the properties of multi passed duplex stainless steel weldment10.3365/KJMM.2014.52.8.631 ↗
37. Phase strain hardening of austenite in Cr-Ni Steels10.1007/BF00660339 ↗
38. MetalPrices.com, April 1st of 2015 〈http://www.metalprices.com〉.
39. Precipitation in creep resistant austenitic stainless steels10.1179/026708301101508972 ↗
40. The effect of the addition of alloying elements on carbide precipitation and mechanical properties in 5% chromium martensitic steels10.1016/j.actamat.2007.05.004 ↗
41. Carbide precipitation and high-temperature strength of hot-rolled high-strength, low-alloy steels containing Nb and Mo10.1007/s11661-002-0178-2 ↗
42. Creep-resistant, Al2O3-forming austenitic stainless steels10.1126/science.1137711 ↗
43. Kinetics of secondary carbides precipitation in a high-chromium white iron10.1361/105994903770342881 ↗
44. The carbide M7C3 in low-temperature-carburized austenitic stainless steel10.1016/j.actamat.2010.11.058 ↗
45. The Thermo-Calc databank system10.1016/0364-5916(85)90021-5 ↗
46. TCFE 2000, The Thermo-Calc Steels Database, upgraded by B.-J. Lee and B. Sundman at KTH, Stockholm, 1999.
47. B.-J. Lee, Pohang University of Science and Technology (POSTECH), Korea, unpublished update of thermodynamic database.
48. Experimental study of structure formation in binary Al-Cu alloys at different cooling rates10.1016/j.msea.2005.05.105 ↗
49. Characterization on carbide of a novel steel for cold work roll during solidification process10.1016/j.matchar.2013.02.011 ↗
50. Mechanical properties, microstructural stability and kinetics of σ-phase formation in 29Cr-6Ni-2Mo-0.38N superduplex stainless steel10.1007/s11661-000-0050-1 ↗
51. Thermodynamic modeling in reduced activation steels10.2355/isijinternational.45.903 ↗
52. Mcguire · 2008
53. Effects of processing and manufacturing of high nitrogen-containing stainless steels on their mechanical, corrosion and wear properties10.1016/S0924-0136(01)00804-4 ↗