journal article·2016-01

Low Cycle Fatigue behavior of SMAW welded Alloy28 superaustenitic stainless steel at room temperature

Y. Kchaou, V. Pelosin, G. Hénaff, N. Haddar, K. Elleuch

Publisher page

Abstract

Abstract This paper focused on the study of Low Cycle Fatigue of welded joints of superaustenitic (Alloy28) stainless steels. Chemical composition and microstructure investigation of Base Metal (BM) and Weld Metal (WM) were identified. The results showed that both of composition is fully austenitic with a dendritic microstructure in the WM. Low cycle fatigue tests at different strain levels were performed on Base Metal (BM) and Welded Joint (WJ) specimens with a strain ratio Re=−1. The results indicated that the fatigue life of welded joints is lower than the base metal. This is mainly due to the low ductility of the Welded Metal (WM) and the presence of welding defects. Simultaneously, Scanning Electron Microscope (SEM) observations of fractured specimens show that WJ have brittle behavior compared to BM with the presence of several welding defects especially in the crack initiation site. An estimation of the crack growth rate during LCF tests of BM and WJ was performed using distance between striations. The results showed that the crack initiation stage is shorter in the case of WJ compared to BM because of the presence of welding defects in WJ specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Experimental investigation of the behavior and the low cycle fatigue life of a welded structure10.1016/j.msea.2013.11.082 ↗
2. Fatigue behavior of laser-welded NiTi wires in small-strain cyclic bending10.1016/j.msea.2012.08.119 ↗
3. Thermo-mechanical fatigue behaviour of welded tubular parts made of ferritic stainless steel10.1016/j.ijfatigue.2013.04.004 ↗
4. The dependence of crack properties on the Cr/Ni equivalent ratio in AISI 304L austenitic stainless steel weld metals10.1016/j.msea.2009.01.049 ↗
5. Low cycle fatigue properties of Alloy 617 base metal and weld joint at room temperature10.1016/j.mspro.2014.06.356 ↗
6. Philippe Mongabure, low cycle fatigue of welded joints: new experimental approach10.1016/j.nucengdes.2003.06.016 ↗
7. Experimental investigation of fatigue behaviour for welded joint with mechanical heterogeneity10.1016/0308-0161(94)00020-4 ↗
8. Research on fatigue behavior of electron beam welding joint of 06Cr19Ni10 austenitic stainless steel sheet10.1016/j.matdes.2014.01.003 ↗
9. Effect of SMAW manufacturing process in high-cycle fatigue of AISI 304 base metal using AISI 308L filler metal10.1016/j.jmapro.2015.08.005 ↗
10. Low cycle fatigue of welded joints with aging influence10.1016/j.msea.2012.11.101 ↗
11. KCl-induced high temperature corrosion of the austenitic Fe–Cr–Ni alloys 304L and Sanicro 28 at 600°C10.1016/j.corsci.2005.05.018 ↗
12. Passivity of Sanicro28 (UNS N-08028) stainless steel in polluted phosphoric acid at different temperatures studied by electrochemical impedance spectroscopy and Mott–Schottky analysis10.1016/j.corsci.2014.04.056 ↗
13. Passivation behaviour of stainless steel (UNS N-08028) in industrial or simplified phosphoric acid solutions at different temperatures10.1016/j.corsci.2015.07.025 ↗
14. Microstructural, compositional and mechanical investigation of Shielded Metal Arc Welding (SMAW) welded superaustenitic UNS N08028 (Alloy28) stainless steel10.1016/j.matdes.2014.06.014 ↗
15. Microstructure and mechanical properties of carbon steel A210/superalloy Sanicro 28 bimetallic tubes10.1016/S0921-5093(02)00686-X ↗
16. Constitutive description of high temperature flow behavior of Sanicro-28 super-austenitic stainless steel10.1016/j.msea.2013.09.036 ↗
17. The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel10.1016/j.msea.2005.09.081 ↗
18. Creep-fatigue interaction behaviour of type 308 stainless steel weld metal and type 304 stainless steel base metal10.1016/0142-1123(93)90180-X ↗
19. Nicolas Huin, Effets d'environnement sur la fatigue de l'acier inoxydable 304L en milieu primaire REP sous chargement cyclique, Ecole Nationale Supérieure de Mécanique et d’Aérotechnique de Poitiers, 2013.
20. C.R. Brinkman, G.E. Korth, J.M. Beeston, Comparison of the strain controlled low cycle fatigue behaviour of type 304/308 weld and base material, in: Proceedings of the Int. Conf. on Creep and Fatigue in Elevated Temperature Applications (9th Ed.), Paper C218/73, Philadelphia, PA, September 1973 , Institution of Mechanical Engineers, April 1974, p. 218.
21. Effect of strain rate on the low cycle fatigue behavior of 316L(N) stainless steel weld joints10.1016/j.proeng.2013.03.239 ↗
22. A study of the effect of cyclic thermal stresses on a ductile metal
23. The exponential law of endurance tests
24. Simple expressions to estimate the Manson–Coffin curves of ductile cast irons10.1016/j.ijfatigue.2015.03.025 ↗
25. Cyclic deformation and fatigue behaviour of 7Mo–0.5N superaustenitic stainless steel stress-strain relations and fatigue life10.1016/S1359-6454(00)00201-9 ↗
26. Cyclic plasticity in type 316L austenitic stainless steel10.1111/j.1460-2695.1994.tb00808.x ↗
27. Dissipation and fatigue damage10.3139/120.100615 ↗
28. Energy-based approach for the evaluation of low cycle fatigue behaviour of 2.25Cr–1Mo steel at elevated temperature10.1016/j.msea.2010.05.011 ↗
29. Cyclic response and inelastic strain energy in low cycle fatigue10.1016/0142-1123(84)90003-3 ↗
30. Energy-based prediction of low cycle fatigue life of high-strength structural steel10.1016/S1006-706X(12)60151-4 ↗
31. New energy-based low cycle fatigue model for reactor steels10.1016/j.matdes.2015.04.039 ↗
32. Friedel · 1964
33. Fatigue striation spacing analysis10.1016/1044-5803(94)90046-9 ↗
34. Laurent De Baglion de La Dufferie, Comportement et endommagement en fatigue oligocyclique d’un acier inoxydable austénitique 304L en fonction de l’environnement (vide, air, eau primaire REP) à 300°C, Ecole Nationale Supérieure de Mécanique et d’Aérotechnique de Poitiers, 2011.