journal article·2003-12

Lowering of CaZrO3 sintering temperature using lithium–calcium fluoride flux addition

M. Pollet, S. Marinel

Materials Science and Engineering: A· Volume 362· Issue 1-2
Publisher page

Abstract

Abstract The effects of a lithium–calcium fluoride flux on the sintering and the low frequency dielectric properties of acceptor/donor-doped CaZrO 3 ceramics were investigated. The acceptor(Mn)/donor(W) doping was used to avoid reduction of Zr in the CaZrO 3 ceramics. The lithium–calcium fluoride flux was selected since liquid phase sintering lower the CaZrO 3 sintering temperature. With such additions, several low-temperature mechanisms emerge and the sintering temperatures can be effectively lowered. A simple model was used to analyse these different mechanisms in terms of their origin and efficiency. The dielectric properties of CaZrO 3 with flux additions are strongly dependent on the densification. CaZrO 3 ceramics sintered at high temperature without any addition display a high permittivity, low losses and a good behaviour under electrical field and temperature. Using this flux, CaZrO 3 can be sintered below the nickel’s melting point (1450 °C) and 92% of the theoretical density can be achieved. The dielectric properties at 1 MHz are then e r ≈34 and a loss factor close to 0.1%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Engelen · Solid State Ionics · 1997 · 96 · 5510.1016/S0167-2738(96)00615-7 ↗
2. Kiyoshi · Solid State Ionics · 1998 · 108 · 35510.1016/S0167-2738(98)00063-0 ↗
3. Yamagushi · Ferroelectrics · 1980 · 27 · 27310.1080/00150198008226116 ↗
4. B.P. Borglum, R.C. Buchanan, in: G.W. Bailey (Ed.), Proceedings of the 45th Annual Meeting of the Electron Microscopy Society of America, San Francisco Press, CA, 1987, p. 372.10.1017/S0424820100126652 ↗
5. Albertsen · J. Electroceram. · 1998 · 2 · 19310.1023/A:1009926916939 ↗
6. Hansen · J. Electroceram. · 1998 · 2 · 8510.1023/A:1009922906146 ↗
7. Hansen · J. Am. Ceram. Soc. · 1998 · 81 · 136910.1111/j.1151-2916.1998.tb02494.x ↗
8. Lee · J. Am. Ceram. Soc. · 2000 · 83 · 140210.1111/j.1151-2916.2000.tb01401.x ↗
9. Lee · J. Mater. Sci.: Mater. Electron. · 2000 · 11 · 15710.1023/A:1008985616585 ↗
10. Davies · Solid State Ionics · 1999 · 126 · 32310.1016/S0167-2738(99)00244-1 ↗
11. Nadler · J. Am. Ceram. Soc. · 1995 · 38 · 21410.1111/j.1151-2916.1955.tb14932.x ↗
12. J.M. Haussonne, O. Regreny, J. Lostec, G. Desgardin, M. Halmi, B. Raveau, in: P. Vincenzini (Ed.), High Tech Ceramics, Elsevier, Amsterdam, 1987, p. 1515.
13. J.M. Haussonne, G. Desgardin, Dielectric Ceramics, Ceram. Trans. 32 (1993) 155.
14. Desgardin · Ceram. Bull. · 1985 · 64 · 564
15. Benzida · J. Fluorine Chem. · 1995 · 73 · 6910.1016/0022-1139(94)03211-H ↗
16. Pollet · J. Eur. Ceram. Soc. · 2003 · 23 · 192510.1016/S0955-2219(03)00013-X ↗
17. M. Pollet, S. Marinel, G. Desgardin, J. Eur. Ceram. Soc., in press.