On the hot working of FeSi ferritic steels
Source abstract
Abstract
Abstract The high temperature deformation behavior of FeSi electrical steels (ferritic at the testing temperature) was studied under hot compression conditions. The flow curves of these steels exhibit a conventional dynamic recovery behavior. The analysis of the hot working data was carried out by applying the classical hyperbolic-sine equation to derive the peak stress in the flow curve by determining the apparent stress exponent, n, and the activation energy, Q. A modified hyperbolic-sine equation showed a better correlation with experimental data. The modified equation assumes that the rate controlling mechanism is the glide and climb of dislocations. Consequently, Q can be taken equal to the iron self-diffusion in ferrite (Q=239 kJ/mol) and the creep exponent can be set equal to 5. The whole flow curves were also characterized by the one variable approach which in turn requires deriving characteristic dynamic recovery and work hardening terms at any processing conditions. A direct relationship between the hardening and softening terms and the Si content of the steels was obtained. Finally all the flow curves were discussed and modeled as a function of the processing parameters and chemical composition. Finally, a universal constitutive equation to describe the high temperature deformation of these steels taking account of the chemical composition is proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Lyudkovsky · J. Miner. Met. Mater. Soc. · 1986 · 3 · 1810.1007/BF03257950 ↗
2. H.P. Stüwe, J. Faustmann, Introducción a las Texturas de los Materiales Metálicos, Ed. Montecorvo, Madrid, 1969.
3. Suarez · Corros. Sci. · 2010 · 52 · 204410.1016/j.corsci.2010.02.001 ↗
4. Kubaschewski · 1982
5. D. Ruiz Romera, PhD thesis, Ghent University, Ghent, Belgium, 2006.
6. Rodriguez-Calvillo · ISIJ Int. · 2006 · 46 · 168510.2355/isijinternational.46.1685 ↗
7. Rodriguez-Calvillo · Mater. Sci. Technol. · 2006 · 22 · 110510.1179/174328406X114207 ↗
8. Sidor · Mater. Charact. · 2012 · 71 · 4910.1016/j.matchar.2012.06.006 ↗
9. Rodríguez-Calvillo · Mater. Chem. Phys. · 2012 · 136 · 71010.1016/j.matchemphys.2012.07.047 ↗
10. Ros-Yanez · J. Mater. Process. Technol. · 2003 · 143–144 · 91610.1016/j.jmatprotec.2003.10.002 ↗
11. P. Rodriguez-Calvillo, PhD thesis, Ghent University, Ghent, Belgium, 2007
12. Humphreys · 2004
13. Doherty · Mater. Sci. Eng. A · 1997 · 238 · 21910.1016/S0921-5093(97)00424-3 ↗
14. Dieter · 1988
15. McQueen · Metall. Trans. A · 1977 · 8 · 80710.1007/BF02661562 ↗
16. McQueen · Mater. Sci. Eng. A · 2002 · 322 · 4310.1016/S0921-5093(01)01117-0 ↗
17. Davies · TMS-AIME · 1963 · 227 · 665
18. Karashima · TMS-AIME · 1968 · 242 · 1703
19. Leslie · 1981
20. Leslie · Metall. Trans. · 1972 · 3 · 510.1007/BF02680580 ↗
21. Uvira · TMS-AIME · 1968 · 242 · 1619
22. K. Tafzi, J.M. Cabrera, J.M. Prado, in: D.G. Morris, S. Naka, P. Caron (Ed.), Proceedings of the International Conference EUROMAT׳99, Munich, 1999.
23. Akta · ISIJ Int. · 2005 · 45 · 168610.2355/isijinternational.45.1686 ↗
24. Prasad · 1997
25. Brown · Int. J. Plast. · 1989 · 5 · 9510.1016/0749-6419(89)90025-9 ↗
26. A. Shen, H.J. McQueen, in: Proceedings of the 3rd International Conference on Thermomechanical Processing of Steel, TMP 2008, Padua, 2008.
27. P. Rodriguez, J. Cabrera, Y. Houbaert, in: Proceedings of the 3rd International Conference on Thermomechanical Processing of Steel, TMP 2008, Padua, 2008.
28. Calvillo · Adv. Mater. Res. · 2007 · 15–17 · 70810.4028/www.scientific.net/AMR.15-17.708 ↗
29. Medina · Acta Mater. · 1996 · 44 · 13710.1016/1359-6454(95)00151-0 ↗
30. Sellars · Int. Metall. Rev. · 1972 · 17 · 110.1179/095066072790137765 ↗
31. Laasraoui · Metall. Trans. A · 1991 · 22 · 154510.1007/BF02667368 ↗
32. Sellars · Met. Sci. · 1979 · 13 · 18710.1179/msc.1979.13.3-4.187 ↗
33. C.M. Sellars, in: C.M. Sellars, C.J. Davies (Ed.), Proceeding of the International Conference on Hot Working and Forming Processes, London, 1980.
34. Sellars · Philos. Trans. R. Soc. Lond., A · 1978 · 228 · 14710.1098/rsta.1978.0010 ↗
35. Frost · 1982
36. Cabrera · Mater. Sci. Technol. · 1996 · 12 · 57910.1179/mst.1996.12.7.579 ↗
37. J.M. Cabrera, PhD thesis, Universidad Politécnica de Catalunya, Barcelona, Spain, 1995.
38. Cabrera · Metall. Trans. · 1997 · 28 · 223310.1007/s11661-997-0181-8 ↗
39. J.M. Cabrera, J.J. Jonas, J.M. Prado, in: J.M. Rodriguez-Ibabe, I. Gutiérrez, B. López (Ed.), Proceeding of the International Conference on “Microalloying in Steels. New Trends for the 21st Century”, San Sebastián, 1998.
40. J.M. Cabrera, A. Al Omar, J.M. Prado, J.J. Jonas, in: T.R. McNelley (Ed.), Proceeding of REX׳96 the Third International Conference on Recrystallization and Related Phenomena, MIAS, Monterey, 1997.
41. Mirzadeh · Acta Mater. · 2011 · 59 · 644110.1016/j.actamat.2011.07.008 ↗
42. Bakker · 1990
43. Roberts · 1982
44. Kocks · J. Eng. Mater. Technol. – Trans. ASME · 1976 · 98 · 7610.1115/1.3443340 ↗
45. Estrin · Acta Metall. · 1984 · 32 · 5710.1016/0001-6160(84)90202-5 ↗
46. Bergström · Mater. Sci. Eng. · 1969 · 5 · 19310.1016/0025-5416(70)90081-9 ↗
47. Bergström · Metall. Trans. · 1972 · 3 · 195110.1007/BF02642584 ↗