Mechanical spectroscopy in commercial Fe–6 wt.% Si alloys between 400 and 1000 K
Source abstract
Abstract
Abstract Mechanical spectroscopy, neutron diffraction and differential scanning calorimetry (DSC) were performed on commercial Fe–6 wt.% Si alloy after quenching from high temperature. The damping spectrum shows a peak at around 800 K and an associated modulus defect. The modulus shows an increase during the second and subsequent heating runs. In addition, an anomaly in the modulus behavior has been found at around 400 K. Different thermal treatments allows to obtain two different recovery degrees of the quenched-in defects. The influence of the recovery degree on the 800 K internal friction peak and on the anelastic modulus has been evaluated and confirm the validity of the grain boundary mechanism associated to this peak. Experimental results are discussed on the basis of recovery and ordering processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Semiconductor materials and interfaces · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. R.M. Bozorth, Ferromagnetism, MacMillan, London, 1951.
2. Tenwick · Int. J. Rap. Solidific. · 1985 · 1 · 143
3. E.S. Greiner, The Alloys of Iron and Silicon, McGraw-Hill, New York, 1933.
4. K.J. Pascoe, Properties of Materials for Electrical Engineers, Wiley, New York, 1985.
5. Watanabe · Philos. Magn. Lett. · 1989 · 59 · 4710.1080/09500838908214776 ↗
6. Arai · Metall. Trans. A · 1986 · 17 · 129510.1007/BF02650110 ↗
7. A.S. Nowick, B.S. Berry, Anelastic Relaxation in Crystalline Solids, Academic Press, New York, 1972.
8. R. Schaller, G. Fantozzi, G. Gremaud (Eds.), Mechanical Spectroscopy Q−1 2001, Trans. Technical Publication Uetikon-Zuerich, Switzerland, 2001.10.4028/b-N33BWo ↗
9. Lambri · J. Non-Cryst. Solids · 2001 · 287 · 7010.1016/S0022-3093(01)00542-7 ↗
10. Lambri · J. Mater. Sci. · 2000 · 35 · 7910.1023/A:1004788415305 ↗
11. Gómez-Polo · J. Magn. Magn. Mater. · 2003 · 254–255 · 8810.1016/S0304-8853(02)00768-0 ↗
12. R.J. Singh, D. Kumar, B. Chen, in: Encyclopedia of Applied Physics, vol. 21, Wiley/VCH, New York, 1997.
13. Kerl · Intermetallics · 1999 · 7 · 30110.1016/S0966-9795(98)00118-6 ↗
14. Arai · Trans. Jpn. Inst. Metall. · 1984 · 25 · 85510.2320/matertrans1960.25.855 ↗
15. Viala · Mater. Sci. Eng. · 1996 · A212 · 6210.1016/0921-5093(96)10188-X ↗
16. R.W. Cahn, P. Haasen (Eds.), Physical Metallurgy, North-Holland, Amsterdam, 1996.10.1017/CBO9781107295551 ↗
17. Simpson · Phys. Rev. B · 1977 · 16 · 148910.1103/PhysRevB.16.1489 ↗
18. Y.-Q. Sun, in: J.H. Westbrook, R.L. Fleischer (Eds.), Intermetalic Compounds. Basic Mechanical Properties and Lattice Defects of Intermetallic Compounds, Wiley, Chichester, England, 2000, pp. 67–90.