journal article·2004-12

Creep and rupture behavior of a commercial aluminum–magnesium alloy A5083 at constant applied stress

Keisuke Ishikawa, Yasuo Kobayashi

Publisher page

Abstract

Abstract Commercial aluminum–magnesium alloy was tested to examine the creep-rupture behavior at constant applied stress. At the initial stage, the alloy showed the inverse transition creep with the incubation time. The incubation time would be induced through the release of the free dislocations from the magnesium atmosphere or/and second particles. Minimum strain rate was observed instead of steady state creep rate. The minimum strain rate had the dependence of the applied stress and temperature. The stress exponent was about 5.4 and the activation energy was about 210 kJ/mol. They were independent of the applied stress and temperature. The high activation energy was for the diffusion of magnesium atoms and of vacancies as the additional energy to continue the further creep deformation at constant applied stress. The Monkman–Grant relationship was observed between the minimum strain rate and the creep life.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. R.W. Evans, B. Wilshire, Introduction to Creep, Institute of Materials, London, UK, 1993, p. 60.
2. Caisso · Rev. Metall · 1959 · 56 · 23710.1051/metal/195956030237 ↗
3. Yoshinaga · Philos. Mag. A · 1971 · 23 · 136710.1080/14786437108217008 ↗
4. J. Weertman, J.R. Weertman, in: R.W. Cahn (Ed.), Physical Metallurgy, North-Holland, Amsterdam, 1965, pp. 793–819.
5. M. Hanse, Constitution of Binary Alloys, McGraw-Hill, New York, 1958, pp. 110–114.
6. Horiuchi · J. Jpn. Inst. Met · 1976 · 36 · 406
7. Takeuchi · J. Mater. Sci · 1976 · 11 · 154210.1007/BF00540888 ↗
8. Chaudhury · Metall. Trans · 1987 · 18A · 210510.1007/BF02647082 ↗
9. Taleff · Metall. Trans. A · 1998 · 29 · 1081
10. Ishikawa · Aluminum Trans · 1999 · 1 · 131
11. Ishikawa · Mater. Sci. Eng. A · 2002 · 322 · 15310.1016/S0921-5093(01)01128-5 ↗
12. J. Cadek, Creep in Metallic Materials, Elsevier, Amsterdam, 1988, p. 71.
13. Namba · Mater. Sci. Eng. A · 1988 · 101 · 3110.1016/0921-5093(88)90047-0 ↗
14. A.H. Cottrell, Dislocations and Plastic Flow in Crystal, Clarendon Press, London, UK, 1963, p. 141.
15. M.F. Ashby, in: A. Kelly, R.B. Nicholson (Eds.), Strengthening Methods in Crystals, Elsevier, Amsterdam, 1971, p. 183.
16. D.K. Felbeck, A.G. Atkins, Strength and Fracture of Engineering Solids, Prentice-Hall, NJ, USA, 1996, p. 249.
17. Cottrell · Proc. R. Soc · 1959 · 199 · 109
18. J. Takamura, in: R.W. Cahn (Ed.), Physical Metallurgy, North-Holland, Amsterdam, 1965, pp. 681–733.
19. N.J. Gjostein, Diffusion, ASM, Ohio, USA, 1973, p. 263.
20. D.R.H. Johes, Engineering Materials, vol. 3, Pergamon Press, Oxford, UK, 1993, p. 119.
21. F. Garofalo, Fundamentals of Creep and Creep-rupture in Metals, Macmillan, New York, USA, 1965, p. 203.
22. R.W. Evans, J.D. Parker, B. Wilshire, Recent Advances in Creep and Fracture of Engineering Materials and Structures, Pineridge Press, Swansea, England, 1982, pp. 135–184.
23. Monkman · Proc. ASTM · 1956 · 56 · 593
24. M. Barsoum, Fundamentals of Ceramics, McGraw-Hill, New York, USA, 1997, p. 474.