journal article·2010-10

Microstructure and tensile properties of the sub-micro and nano-structured Al produced by laser surface melting

X.G. Cui, C.Y. Cui, X.N. Cheng, X.J. Xu, J.Z. Lu, J.D. Hu, Y.M. Wang

Materials Science and Engineering: A· Volume 527· Issue 27-28
Publisher page

Abstract

Abstract Experiments were conducted to study the microstructure and tensile properties of the sub-micro and nano-structured Al produced by the Nd:YAG pulsed laser surface melting (LSM). The surface and longitudinal section microstructures of the Al samples after LSM were analyzed. The solidification microstructures in the LSM region were very fine which was beneficial to improve the properties of the Al sample. The tensile behavior and the relevant fracture mechanism of the LSM layer on the Al surface were investigated based on the analyses of the tensile test results. The fracture morphologies in the LSM region were small and shallow dimples with the size of 0.4–1 μm. It indicated that the Al sample showed the ductile behavior because the grains were refined effectively after LSM. Furthermore, the typical amorphous fracture morphology with the fish scale structure was also obtained at the strain rate of 1.0 × 10 −4 s −1 after LSM with the laser power density of 3.65 × 10 9 W/m 2 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Surface Treatment and Residual Stress · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Yamada · Surf. Coat. Technol. · 2007 · 201 · 857910.1016/j.surfcoat.2006.02.081 ↗
2. Katharria · Appl. Surf. Sci. · 2007 · 253 · 682410.1016/j.apsusc.2007.01.130 ↗
3. Tian · Mater. Sci. Eng. A · 2008 · 493 · 17610.1016/j.msea.2007.07.102 ↗
4. Li · Acta Mater. · 2008 · 56 · 23010.1016/j.actamat.2007.09.020 ↗
5. Dai · Mater. Sci. Eng. A · 2007 · 463 · 4610.1016/j.msea.2006.07.159 ↗
6. Ryan · Mater. Sci. Eng. A · 2008 · 479 · 6510.1016/j.msea.2007.06.029 ↗
7. Wang · Scripta Mater. · 2007 · 56 · 73710.1016/j.scriptamat.2007.01.025 ↗
8. Cui · Appl. Surf. Sci. · 2008 · 254 · 677910.1016/j.apsusc.2008.04.069 ↗
9. Stasic · Appl. Surf. Sci. · 2009 · 255 · 447410.1016/j.apsusc.2008.11.049 ↗
10. Tsuji · Appl. Surf. Sci. · 2009 · 255 · 962610.1016/j.apsusc.2009.04.075 ↗
11. Halbwax · Thin Solid Films · 2008 · 516 · 679110.1016/j.tsf.2007.12.117 ↗
12. Chang · J. Alloys Compd. · 2005 · 386 · 19710.1016/j.jallcom.2004.03.148 ↗
13. Zhang · J. Appl. Phys. · 2002 · 91 · 577510.1063/1.1452761 ↗
14. Roy · Wear · 2009 · 266 · 111310.1016/j.wear.2009.03.015 ↗
15. Lu · Acta Mater. · 2010 · 58 · 398410.1016/j.actamat.2010.03.026 ↗
16. Kubota · J. Alloys Compd. · 2007 · 434–435 · 29410.1016/j.jallcom.2006.08.329 ↗
17. Cui · Opt. Laser. Technol. · 2007 · 39 · 154410.1016/j.optlastec.2006.12.005 ↗
18. Chu · Mater. Chem. Phys. · 2001 · 68 · 5610.1016/S0254-0584(00)00267-4 ↗
19. Kuo · Mater. Sci. Eng. A · 2006 · 416 · 28110.1016/j.msea.2005.10.041 ↗
20. Liu · Mater. Des. · 2004 · 25 · 57310.1016/j.matdes.2004.02.017 ↗
21. Dudrová · Powder Metal. Prog. · 2008 · 8 · 59
22. Shen · Mater. Sci. Eng. A · 2008 · 487 · 41010.1016/j.msea.2007.10.018 ↗
23. Xing · Mater. Lett. · 2008 · 62 · 4410.1016/j.matlet.2007.04.073 ↗
24. Kim · J. Alloys Compd. · 2009 · 478 · 83110.1016/j.jallcom.2008.12.045 ↗
25. Wang · Mater. Sci. Eng. A · 2000 · 292 · 14210.1016/S0921-5093(00)01003-0 ↗
26. Wang · Appl. Phys. Lett. · 2002 · 80 · 239510.1063/1.1465528 ↗