journal article·2011-07

Effect of forming conditions on the softening behavior in coarse grained structures

C. Rehrl, S. Kleber, O. Renk, R. Pippan

Materials Science and Engineering: A· Volume 528· Issue 19-20
Publisher page

Abstract

Abstract Polycrystalline nickel with a purity of 99.99 wt% and different starting grain sizes of 240 μm and 770 μm has been investigated. The effects of the initial grain size on the hot deformation behavior were studied by compression tests at various forming conditions. The microstructure was captured after deformation, using electron back scatter diffraction technique (EBSD). A variation of the initial grain size has unexpected effects on the acting softening mechanisms. A coarsening in the starting microstructure leads to a higher flow stress and a remarkable higher hardening at elevated temperatures. Furthermore, the nucleation of dynamic recrystallized grains is enormously retarded due to the less pronounced grain boundary bulging in a coarser grained microstructure compared to a finer one. As a consequence, discontinuous dynamic recrystallization generates a metastable grain size, that is finer than the steady state grain size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Recovery and Recrystallization during high temperature deformation10.1016/B978-0-12-341806-7.50014-3 ↗
2. Sellars · Phil. Trans. R. Soc. Lond. A · 1978 · 288 · 14710.1098/rsta.1978.0010 ↗
3. Sellars · Met. Forum · 1981 · 4 · 75
4. McQueen · Met. Forum · 1981 · 4 · 81
5. Doherty · Mater. Sci. Eng. A · 1997 · 238 · 21910.1016/S0921-5093(97)00424-3 ↗
6. Dynamic recovery and recrystallization
7. McQueen · Metall. Mater. Trans. A · 2002 · 33 · 34510.1007/s11661-002-0096-3 ↗
8. Humphreys · 2003
9. Montheillet · Rev. Metall. · 2002 · 9 · 76710.1051/metal:2002174 ↗
10. McQueen · J. Alloys Compd. · 2004 · 378 · 3510.1016/j.jallcom.2003.10.067 ↗
11. Miura · Scripta Mater. · 2003 · 48 · 150110.1016/S1359-6462(03)00053-8 ↗
12. Miura · Scripta Mater. · 2004 · 51 · 67110.1016/j.scriptamat.2004.06.015 ↗
13. Miura · Scripta Mater. · 2004 · 50 · 6510.1016/j.scriptamat.2003.09.035 ↗
14. Escher · Acta Mater. · 1998 · 46 · 52510.1016/S1359-6454(97)00264-4 ↗
15. Mahajan · Acta Mater. · 1997 · 45 · 263310.1016/S1359-6454(96)00336-9 ↗
16. Sah · Met. Sci. · 1974 · 8 · 32510.1179/msc.1974.8.1.325 ↗
17. Doherty · 1978
18. Blaz · Met. Sci. · 1983 · 17 · 60910.1179/030634583790420448 ↗
19. Sakui · Trans. Iron Steel Inst. Jpn. · 1977 · 17 · 71810.2355/isijinternational1966.17.718 ↗
20. Sakai · Acta Metall. · 1984 · 32 · 18910.1016/0001-6160(84)90049-X ↗
21. In: T. Sakai, S. Yue, E. Essadiqi (Eds.), Thermomechanical Processing of Steels (J.J. Jonas Symp.), TMS-CIM, Montreal, 2000, pp. 47–62.
22. Belyakov · Mater Sci. Eng. A · 1998 · 255 · 13910.1016/S0921-5093(98)00784-9 ↗
23. Miura · J. Jpn. Inst. Met. · 1994 · 58 · 26710.2320/jinstmet1952.58.3_267 ↗
24. Angella · Mater. Sci. Eng. A · 2008 · 475 · 25710.1016/j.msea.2007.05.089 ↗
25. OIM Analysis 4.5, User Manual, TexSEM-Labs. Inc., 2004.
26. Vorhauer · Acta Mater. · 2003 · 51 · 67710.1016/S1359-6454(02)00446-9 ↗
27. Gottstein · Z. Metallk. · 2003 · 94 · 62810.3139/146.030628 ↗
28. Kocks · Prog. Mater. Sci. · 2003 · 48 · 17110.1016/S0079-6425(02)00003-8 ↗
29. Senkov · Mater. Sci. Eng. A · 1998 · 255 · 4910.1016/S0921-5093(98)00779-5 ↗
30. Margolin · Acta Metall. · 1975 · 23 · 141110.1016/0001-6160(75)90150-9 ↗
31. Jiang · Acta Metall. Mater. · 1995 · 43 · 334910.1016/0956-7151(95)00031-P ↗
32. Sakai · Mater. Sci. Technol. · 1990 · 6 · 125110.1179/mst.1990.6.12.1251 ↗
33. Sakai · Mater. Sci. Technol. · 1986 · 2 · 65910.1179/mst.1986.2.7.659 ↗