A dynamic ductile fracture model on the effects of pressure, Lode angle and strain rate
Source abstract
Abstract
Abstract To improve the accuracy of impact failure prediction of ductile material under complex stress states, a novel multi-parameters dynamic ductile fracture model with constitutive relation and fracture criterion is proposed by involving the effects of hydrostatic pressure, Lode angle and strain rate. This novel dynamic fracture model is based on our proposed ductile fracture model under quasi-static loading. Furthermore, the corresponding material calibration strategy with some simple quasi-static and dynamic tests is also presented. In order to verify the present dynamic fracture model under complex stress states, both hydrostatic pressure and Lode angle, a plate specimen with notch made from Al 7075 was designed and the split Hopkinson bar (SHPB) tension tests with elevated loading forces were conducted. Meanwhile, parallel numerical simulations were performed with two fracture models, i.e., the Johnson–Cook model and the present novel model, implemented into the commercial finite element platform ABAQUS/explicit through user material subroutine VUMAT. By comparing with the numerical results and the SHPB experimental data, it is demonstrated that the novel dynamic ductile fracture model can predict favorably well with the SHPB experimental data. Furthermore, local strain rates and stress states of the specimen in the notch region during deformation were also studied.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Metal Forming Simulation Techniques · Fluid Dynamics Simulations and Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. G.R. Johnson, W.H. Cook, in: Proceedings of the Seventh International Symposium on Ballistics, The Hague, The Netherlands, 1983.
2. Johnson · Engineering Fracture Mechanics · 1985 · 21 · 3110.1016/0013-7944(85)90052-9 ↗
3. Hopperstad · European Journal of Mechanics – A/Solids · 2003 · 22 · 110.1016/S0997-7538(02)00006-2 ↗
4. Børvik · European Journal of Mechanics – A/Solids · 2003 · 22 · 1510.1016/S0997-7538(02)00005-0 ↗
5. Clausen · Materials Science and Engineering: A · 2004 · 364 · 26010.1016/j.msea.2003.08.027 ↗
6. Børvik · International Journal of Solids and Structures · 2001 · 38 · 624110.1016/S0020-7683(00)00343-7 ↗
7. Bodner · 1975 · 385
8. Zerilli · Journal of Applied Physics · 1987 · 61 · 181610.1063/1.338024 ↗
9. Zerilli · Journal of Applied Physics · 1990 · 68 · 158010.1063/1.346636 ↗
10. Khan · International Journal of Plasticity · 1992 · 8 · 39710.1016/0749-6419(92)90057-J ↗
11. Liu · Materials Science and Engineering: A · 2013 · 576 · 33710.1016/j.msea.2013.04.013 ↗
12. Bai · International Journal of Plasticity · 2008 · 24 · 107110.1016/j.ijplas.2007.09.004 ↗
13. Yang · Acta Metallurgica Sinica · 2008 · 44 · 489
14. McClintock · Journal of Applied Mechanics · 1968 · 35 · 36310.1115/1.3601204 ↗
15. Rice · Journal of the Mechanics and Physics of Solids · 1969 · 17 · 20110.1016/0022-5096(69)90033-7 ↗
16. M.L. Wilkins, R.D. Streit, J.E. Reaugh, Technical report, Lawrence Livermore Laboratory, Livermore, CA,1980.
17. A. Kamoulakos, P. Culiere, T. Araki, in: Proceedings of the International Body Engineering Conference, Chiba, Japan, 2003, pp. 47–52.
18. Kamoulakos · 2005 · 795
19. Bao · International Journal of Mechanical Sciences · 2004 · 46 · 8110.1016/j.ijmecsci.2004.02.006 ↗
20. Xue · International Journal of Solids and Structures · 2007 · 44 · 516310.1016/j.ijsolstr.2006.12.026 ↗
21. Xue · International Journal of Solids and Structures · 2008 · 46 · 142310.1016/j.ijsolstr.2008.11.009 ↗
22. Fan · International Journal of Applied Mechanics · 2012 · 4 · 125002210.1142/S1758825112500226 ↗
23. High strain-rate testing: tension and compression10.1007/BF02326244 ↗