journal article·2007-04

Effect of lath microstructure on the mechanical properties of flow-formed C-250 maraging steels

Yen-Jung Lee, Ming-Chueh Kung, I-Kang Lee, Chang-Pin Chou

Publisher page

Abstract

Abstract A solution treated C-250 maraging steel tubing pre-form was cold forward flow-formed into a seamless tube to attain a 79% wall thickness reduction. Various heat treatments were then conducted on the tube to strengthen the material. This study found that although direct aging treatment could generate the tensile strength exceeded the specification's requirement in all the heat treatment attempts, the C-250 steel suffered loss of ductility in percentage elongation. Through “solution + aging” treatment, the steel's ductility was much improved and tensile properties can still meet the specification. The pre-treatment of high homogenization temperature could produce coarse lath martensitic microstructure and result in a decrease of the tensile strength of the C-250 steel. Furthermore, the C-250 steel also showed the presence of seemingly globular precipitates within the lath structure. Detailed discussion of mechanical properties obtained for each of the heat-treated steels in terms of microstructures and metallographic works was presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. S. Floreen, ASM Metals Handbook, vol. 1, ninth ed., 1978, p. 445.
2. A.M. Hall, C.J. Slunder, NASA Report, 1968, SP-5051.
3. Ahmed · Mater. Sci. Technol. · 1995 · 11 · 128110.1179/mst.1995.11.12.1281 ↗
4. Lee · Mater. Eng. Perform. · 2003 · 12 · 4110.1361/105994903770343466 ↗
5. AMS 6512C, Aerospace Material Specification, Warrendale, PA, USA, 1991.
6. Decker · Trans. ASM · 1962 · 55 · 58
7. I.K. Lee, The effect of heat treatment on microstructure and mechanical properties of flow-formed maraging steel weldment by EBW, Ph.D. Thesis, National Chiao Tung University, Hsinchu, Taiwan, 2002.
8. AMS 6520C, Aerospace Material Specification, Warrendale, PA, USA, 1995.
9. Y.M. Lee, The study on autogenously welding of ultra-strong maraging steel, M.S. Thesis, National Taiwan University, Taipei, Taiwan, 1988.
10. Askel · 2006
11. Chilton · Trans. ASM · 1967 · 60 · 528
12. Goldberg · Trans. ASM · 1969 · 62 · 219
13. Thomas · Trans. ASM · 1969 · 62 · 852
14. Francis · Metall. Trans. A · 1976 · 7A · 46510.1007/BF02642845 ↗
15. Reisdorf · Trans. ASM · 1963 · 56 · 783
16. Baker · Trans. ASM · 1964 · 57 · 1008
17. Pitler · Trans. ASM · 1964 · 57 · 220
18. Rack · Metall. Trans. A · 1971 · 2 · 301110.1007/BF02814948 ↗
19. Ali · Mater. Sci. Technol. · 1994 · 10 · 9710.1179/mst.1994.10.2.97 ↗