Unidirectional crystallization and high-temperature oxidation of in situ Ti3(Al,Si)–Ti5(Si,Al)3 composite
Source abstract
Abstract
Abstract The paper is devoted to preparation and high-temperature oxidation of in situ Ti3(Al,Si)–Ti5(Si,Al)3 composite. The composite with nominal chemical composition of Ti–19 at.%Al–11 at.%Si was unidirectionally solidified using the optical floating zone technique. Two solidification rates were applied −5 and 18.8 mm/h. The composite comprises Ti5(Si,Al)3 particles dispersed in Ti3(Al,Si) matrix. Structural examination of unidirectionally crystallized samples shows that only crystallization rate of 5 mm/h produces fiber-like silicides with length up to 150 μm and diameter less than 10 μm that are well arranged in crystallization direction. Composite crystallized at 18.8 mm/h contains heterogeneous structure with coarse particles similar to the as-cast structure. By relating silicide interparticle spacing and growth rate, an equation of eutectic Ti3(Al,Si)–Ti5(Si,Al)3 composite growth is obtained: λ2.43R = 343 (interparticle spacing λ in μm, growth rate R in mm/h). Oxidation behaviour of the composite at 850 and 950 °C in air is compared to the Ti–60 at.% alloy (γ-TiAl intermetallic) and to the pure Ti. It is shown that both composite and intermetallic oxidize at almost same rate at 850 °C, while the composite oxidizes more rapidly at 950 °C. Scales on composite are stratified and contain at least three sub-layers—(1) alumina, (2) rutile with some amount of Si and (3) (Ti,Al,Si)N nitride. Mechanisms of sub-layers formation are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Leyens · 2003
2. Chaze · J. Mater. Sci. · 1987 · 22 · 120610.1007/BF01233110 ↗
3. Chaze · Oxid. Met. · 1987 · 27 · 110.1007/BF00656726 ↗
4. Majumdar · Mater. Sci. Eng. A · 1999 · 266 · 12310.1016/S0921-5093(99)00045-3 ↗
5. Liang · Scripta Mater. · 2001 · 44 · 104910.1016/S1359-6462(01)00675-3 ↗
6. Majumdar · Wear · 2000 · 242 · 1810.1016/S0043-1648(00)00363-X ↗
7. Winstone · J. Less Common Met. · 1975 · 39 · 20510.1016/0022-5088(75)90195-2 ↗
8. Gale · 2004
9. Kainer · 2006
10. Chawla · 1998
11. Martienssen · 2005
12. Wu · Scripta Met. Mater. · 1994 · 30 · 21310.1016/0956-716X(94)90042-6 ↗
13. Azevedo · Calphad · 2002 · 26 · 35310.1016/S0364-5916(02)00050-0 ↗
14. Wu · Scripta Met. Mater. · 1990 · 24 · 20710.1016/0956-716X(90)90593-6 ↗
15. Lavelle · 1980 · 2275
16. Saha · Scripta Metall. · 1989 · 23 · 8110.1016/0036-9748(89)90097-5 ↗
17. Sinha · 2003
18. Magnin · Acta Met. Mater. · 1991 · 39 · 45310.1016/0956-7151(91)90114-G ↗
19. Fischer · Acta Met. · 1980 · 28 · 77710.1016/0001-6160(80)90155-8 ↗
20. Schneibel · Acta Mater. · 2004 · 53 · 384310.1016/j.actamat.2004.04.033 ↗
21. Rodrigues · Intermetallics · 2006 · 14 · 23610.1016/j.intermet.2005.05.007 ↗
22. Thom · J. Mater. Sci. Lett. · 1994 · 13 · 165710.1007/BF00451730 ↗
23. Vojtěch · Mater. Sci. Eng. · 2003 · A361 · 5010.1016/S0921-5093(03)00564-1 ↗
24. Lee · Mater. Sci. Eng. A · 2002 · 328 · 16110.1016/S0921-5093(01)01670-7 ↗
25. Vojtěch · Oxid. Met. · 2005 · 63 · 30510.1007/s11085-005-4385-2 ↗