Finite element design of SiC/C functionally graded materials for ablation resistance application
Source abstract
Abstract
Summary Elastic finite element numerical models are used to study residual thermal stresses induced during cooling from the sintering temperature of carbon-based SiC/C functionally graded materials (FGMs) for ablation resistance application. Results show that the stresses can be decreased gradually with increasing the layer number (N). In a preferred system, the optimum compositional distribution exponent (P) and thickness of intermediate graded layers and pure SiC layer are 1.0, 3.6 mm and 1.0 mm, respectively. On basis of the simulated results, SiC/C purpose FGM was fabricated by hot-pressing process. SEM observation shows that this material is characterized by a linearly continuous gradient in the microstructure. Further studies indicate that this material has excellent ablation and thermal shock resistances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Thermal fracture behavior of metal/ceramic functionally graded materials10.1016/S0013-7944(02)00054-1 ↗
2. Thermal shock resistance of SiC compositionally graded C/C composites10.1016/S0022-3115(98)00167-6 ↗
3. Design of a C/SiC functionally graded coating for the oxidation protection of C/C composites10.1016/j.carbon.2005.02.025 ↗
4. Thermal residual stresses in a functionally graded material system10.1016/0921-5093(95)09773-2 ↗
5. Effect of functionally graded material (FGM) layers on the residual stress of polytypoidally joined Si3N4–Al2O310.1016/j.msea.2006.06.139 ↗
6. A functionally graded structural design of mirrors for reducing their thermal deformations in high-power laser systems by finite element method10.1016/j.optlastec.2006.06.003 ↗
7. Effects of residual stress on thickness and interlayer of thermal barrier ceramic MgO–ZrO2 coatings on Ni and AlSi substrates using finite element method10.1016/S0261-3069(02)00047-X ↗
8. Finite element analysis of a coating architecture for glass-molding dies10.1016/S0257-8972(01)01399-8 ↗
9. Finite element design of MgO/Ni system functionally graded materials10.1016/j.jmatprotec.2006.07.028 ↗
10. Interlayer of Al2O3–Cr functionally graded material for reduction of thermal stresses in alumina–heat resisting steel joints10.1016/j.jeurceramsoc.2006.04.102 ↗
11. Fabrication and characteristics of plasma facing SiC/C functionally graded composite material10.1016/j.matchemphys.2004.12.038 ↗
12. The improvement in oxidation resistance of carbon by a graded SiC/SiO2 coating10.1016/S0955-2219(03)00098-0 ↗
13. Chemical vapor infiltration and deposition to produce a silicon carbide-carbon functionally gradient material
14. Fracture energies of ceramics10.1111/j.1151-2916.1972.tb13396.x ↗
15. Fracture surface analysis of ceramics10.1007/BF00545152 ↗
16. Fracture toughness by the surface crack in flexure (SCF) method
17. Surface crack in flexure (SCF) measurements of the fracture toughness of advanced ceramics10.1002/9780470314715.ch58 ↗
18. Functionally graded material: a parametric study on thermal-stress characteristics using the Crank-Nicolson-Galerkin scheme10.1016/S0045-7825(99)00289-3 ↗
19. Effective volume-fraction optimization for thermal stress reduction in FGMs using irregular h-refinement10.1002/nme.799 ↗
20. Measurement Standard of Ablation Properties of Materials, GJB323A-96, National Standard Committee of China, Beijing, 1996.