Evolution of microstructure and its effect on wear and mechanical properties of spray cast Al–12Si alloy
Source abstract
Abstract
Abstract In the present study, the microstructural features, mechanical properties and wear characteristics of spray cast Al–12Si alloy have been investigated and compared with that of the chill cast alloy. The spray cast alloy was subjected to hot isostatic pressing for reducing the porosity of the deposit from 26% to 6%. The microstructure of the spray cast and hot isostatically pressed alloy consisted of finely divided globular shaped eutectic Si uniformly distributed in the Al matrix. The fine particles of Si were invariably observed in the bottom and top regions of the spray-deposit in contrast to relatively large size Si particles in the central region. The microstructure of the chill cast alloy was coarse and consisted of an eutectic mixture of α-Al and Si needles. The room temperature tensile tests and hardness measurements showed improved mechanical properties of spray cast alloy over that of the chill cast alloy. In addition, the dry sliding wear test indicated a superior wear resistance of the spray cast alloy over a wide range of sliding velocity. This behavior of the spray cast alloy is discussed in the light of its microstructural modification induced by spray casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Boettinger · Acta Mater. · 2000 · 48 · 4310.1016/S1359-6454(99)00287-6 ↗
2. Fisher · Acta Metall. · 1980 · 28 · 77710.1016/0001-6160(80)90155-8 ↗
3. Liu · Acta Metall. Mater. · 1991 · 39 · 249710.1016/0956-7151(91)90064-8 ↗
4. Magnin · Acta Metall. Mater. · 1991 · 39 · 46910.1016/0956-7151(91)90115-H ↗
5. Hansen · CALPHAD · 2000 · 24 · 33910.1016/S0364-5916(01)00009-8 ↗
6. Srivastava · Mater. Lett. · 2002 · 56 · 79710.1016/S0167-577X(02)00616-X ↗
7. Ojha · Bull. Mater. Sci. · 1992 · 15 · 52710.1007/BF02747543 ↗
8. Gencaga Purcek · Met. Mater. Int. · 2010 · 16 · 14510.1007/s12540-010-0145-1 ↗
9. Mandal · Trans. Indian Inst. Met. · 2007 · 60 · 113
10. Srinivasulu Reddy · ARPN J. Eng. Appl. Sci. · 2009 · 4 · 63
11. Lipinski · Arch. Metall. Mater. · 2008 · 53 · 193
12. Kishori Lal · Materials Transactions, JIM · 1992 · 3 · 811
13. Jayesh Deshpande, The effect of mechanical mold vibration on the characteristics of Al alloys, M.S. Thesis, Worcester Polytechnic Institute, 2006, p. 30.
14. Mandal · Microstructural evolution of Al–Si based composites reinforced with in situ TiB2 particles · 2004 · 1
15. Haitham Razouqi Saleh · Eng. Technol. J. · 2010 · 28 · 28910.30684/etj.28.2.7 ↗
16. Hema V. Guthy, Evolution of the eutectic microstructure in chemically modified and unmodified Al–Si alloys, M.S. Thesis, Worcester Polytechnic Institute, 2002, p. 6.
17. Raju · J. Mater. Sci. · 2008 · 43 · 250910.1007/s10853-008-2464-x ↗
18. Elliot · 1983
19. Lavernia · 1996
20. Ojha · Scripta Metall. Mater. · 1991 · 25 · 44310.1016/0956-716X(91)90208-I ↗
21. Srivastava · Met. Mater. Trans. · 1998 · 29A · 220510.1007/s11661-998-0045-x ↗
22. M.H. Kim, H. Jones, in: S. Steed, H. Warlimont, (Eds.), Proceedings of 5th International Conference on Rapidly Quenched Metals, Elsevier North-Holland, Amsterdam, The Netherlands, 1985, p. 139.10.1016/B978-0-444-86939-5.50039-7 ↗
23. Bewlay · Mat. Sci. Eng. · 1989 · 118 (C) · 20710.1016/0921-5093(89)90072-5 ↗
24. Bewlay · J. Mater. Res. · 1991 · 6 · 143310.1557/JMR.1991.1433 ↗
25. Grant · Cast Met. · 1991 · 4 · 14010.1080/09534962.1991.11819070 ↗
26. Y. Wu, W.A. Cassada, E.J. Lavernia, in: J.J. Moore, E.J. Lavernia, F.H. Froes, (Eds.), Proceedings of International Conference on Advanced Synthesis of Engineered Structural Materials, ASM International, Materials Park, Ohio, 1993, p. 245.
27. Srivastava · Mater. Sci. Eng. A · 2001 · 304–306 · 55510.1016/S0921-5093(00)01514-8 ↗
28. Wu · Met. Mat. Trans. · 1995 · 26A · 123510.1007/BF02670618 ↗
29. Srivastava · Trans. Ind. Inst. Met. · 1999 · 51 · 29
30. Srivastava · Mater. Sci. Eng. A · 2004 · 383 · 1410.1016/j.msea.2004.02.031 ↗
31. Jasim · Wear · 1984 · 98 · 18310.1016/0043-1648(84)90226-6 ↗
32. M. Anil, Spray forming of Aluminum alloys and their tribological characteristics, Ph. D. Thesis, BHU, Varanasi, India, 2007.
33. Kori · Wear · 2007 · 263 · 74510.1016/j.wear.2006.11.026 ↗
34. Sarkar · 1976