journal article·2001-12

Effect of superimposed high cycle fatigue loadings on the out-of-phase thermal-mechanical fatigue behaviour of CoCr22Ni22W14

M Moalla, K.-H Lang, D Löhe

Publisher page

Abstract

The thermal-mechanical fatigue (TMF) behaviour of CoCr22Ni22W14 was investigated under total strain controlled out-of-phase (OP) experiments without and with superimposed high cycle fatigue (HCF) loadings. The minimum temperature T min was 200 °C and the maximum temperature T max was varied between 750 and 1200 °C. The mechanical strain amplitude e me a, during pure TMF tests was kept equal to the thermal strain amplitude e th 1 and the superimposed HCF amplitude e HCF a,t was varied between 0.05 and 0.2%. In both loading conditions cyclic hardening is observed, which is the less pronounced the higher T max is. Only at T max = 1200 °C, cyclic softening appears after cyclic hardening in the first cycles as a result of creep damage accumulation. With increasing superimposed HCF amplitudes, the cyclic deformation behaviour is obviously more and more determined by the superimposed HCF loadings. Due to the dynamic relaxation processes at higher temperatures, tensile mean stresses develop during all TMF tests performed. Under TMF-OP conditions a significant lifetime reduction is observed as a result of superimposed HCF loadings. This lifetime reduction increases with growing HCF amplitudes and may approach 90% of the fatigue lifetime obtained from pure OP experiments. For each T max the dependence between the total strain amplitude (e a.t = e me a.t + e HCF a.t ) and the number of cycles to failure can be described as a potential function (e a.t = A × N B b ) with an exponent b which decreases with increasing T max and which depends on the material properties at different temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Marchand · Fatigue Fract. Eng. Mater. Struct. · 1987 · 10 · 5910.1111/j.1460-2695.1987.tb01149.x ↗
2. D. Löhe, 25. Vortragsveranstaltung des DVM-Arbeitskreises Bruchvorgänge in Karlsruhe (1993), S. 33–48.
3. G. Merckling, Dr-Ing. Thesis, Universität Karlsruhe, Germany (1989).
4. Pan · Phys. Stat. Sol. (A) · 1993 · 138 · 13310.1002/pssa.2211380112 ↗
5. A. Möndel, Dr-Ing. Thesis. Universität Karlsruhe, Germany, Fortschritt-Berichte VDI, Reihe 18, NR. 218, VDI-Verlag (1996).
6. B. Kleinpaß, Dr-Ing. Thesis, Universität Karlsruhe, Germany (1996).
7. M. Moalla, K.-H. Lang, D. Löhe, E. Macherauch, Proc. 4th Int. Conf. on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, 7–11. September 1998 Garmisch-Partenkirchen, Germany, Elsevier Science Ltd., Oxford, UK (1998), pp. 27–32.
8. M. Moalla, K.-H. Lang and D. Löhe, Final colloquium of SFB 167, 28–30 September 1998 Universität Karlsruhe, Germany.
9. K.-H. Lang, in Werkstoffkunde Beiträge zu den Grundlage and zur interdisziplinären Anwendung, DGM-Verlag, Oberursel (1991), S. 79–88.
10. R. Hallstein, Dr–Ing. Thesis, Universität Karlsruhe, Germany (1991).
11. B. Kleinpaß, K.-H. Lang, D. Löhe, E. Macherauch, in Fatigue under Thermal and Mechanical Loading, Proc. Int. Symp. 22–24. May 1995, Petten, NL Kluwer Academic Publishers Dordrecht/Boston/London (1995), pp. 327–337.