journal article·2012-10

Effects of (Cr,Fe)2B borides on hardness in powder-injection-molded product fabricated with Fe-based alloy powders

Jeonghyeon Do, Changwoo Jeon, Choongnyun Paul Kim, Byeong-Joo Lee, Sunghak Lee, Eon-Sik Lee, Tae Shik Yoon, Yang Su Shin

Publisher page

Abstract

Abstract In the present study, a powder injection molding (PIM) product containing (Cr,Fe) 2 B borides was fabricated with Fe-based alloy powders, and its microstructure and hardness were investigated in relation with volume fraction of (Cr,Fe) 2 B. In the Fe-based alloys designed by the thermodynamic calculation, the volume fractions of (Cr,Fe) 2 B increased with increasing (X Cr +X B ) value, and were well matched with those obtained from the thermodynamic calculation. The hardness of the Fe-based alloys linearly increased with increasing volume fraction of (Cr,Fe) 2 B. When Fe-based alloy powders were injection-molded and sintered at 1165 °C, a densified microstructure with almost no pores was obtained. In the sintered microstructure, 56 vol% of (Cr,Fe) 2 B borides, together with a few pores (porosity; 0.5%), were relatively homogeneously distributed in the tempered martensite matrix, which resulted in the very high hardness over 600 VHN. Such a high hardness suggested that the present Fe-based alloy powders could be readily adopted for fabricating PIM products or for replacing conventional stainless steel PIM products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Liu · Mater. Lett. · 2000 · 45 · 3210.1016/S0167-577X(00)00070-7 ↗
2. Sung · J. Mater. Process. Technol. · 2002 · 130 · 32110.1016/S0924-0136(02)00739-2 ↗
3. Suri · Mater. Sci. Eng. · 2003 · A356 · 33710.1016/S0921-5093(03)00146-1 ↗
4. Binet · J. Mater. Process. Technol. · 2005 · 164 · 116010.1016/j.jmatprotec.2005.02.128 ↗
5. Koseski · Mater. Sci. Eng. · 2005 · A390 · 17110.1016/j.msea.2004.08.002 ↗
6. Dobrzanski · J. Mater. Process. Technol. · 2006 · 175 · 17310.1016/j.jmatprotec.2005.04.033 ↗
7. Shibo · J. Mater. Process. Technol. · 2006 · 173 · 31010.1016/j.jmatprotec.2005.12.001 ↗
8. Kim · Met. Mater. Int. · 2011 · 17 · 28310.1007/s12540-011-0416-5 ↗
9. Jeong · Met. Mater. Int. · 2010 · 16 · 51710.1007/s12540-010-0801-5 ↗
10. Kim · Korean Powder Metall. Inst. · 1996 · 3 · 181
11. Kulkarni · Met. Powder Rep. · 1990 · 45 · 62910.1016/0026-0657(90)90594-7 ↗
12. Shu · Acta Mater. · 2006 · 54 · 133510.1016/j.actamat.2005.11.007 ↗
13. Wu · Metall. Mater. Trans. · 2002 · 33A · 218510.1007/s11661-002-0050-4 ↗
14. Hsu · Powder Metall. · 1994 · 37 · 27210.1179/pom.1994.37.4.272 ↗
15. Dourandish · J. Mater. Sci. · 2009 · 44 · 126410.1007/s10853-008-3241-6 ↗
16. Son · Metall. Mater. Trans. · 2009 · 40A · 111010.1007/s11661-009-9809-1 ↗
17. Sundman · Calphad · 1985 · 9 · 15310.1016/0364-5916(85)90021-5 ↗
18. Lee · Met. Mater. Int. · 2010 · 16 · 87710.1007/s12540-010-1204-3 ↗
19. Kim · Met. Mater. Int. · 2010 · 16 · 58110.1007/s12540-010-0810-4 ↗
20. Manna · Surf. Coat. Technol. · 2006 · 201 · 43410.1016/j.surfcoat.2005.11.138 ↗
21. TCFE2000: The Thermo-Calc Steels Database, upgraded by B.-J. Lee and B. Sundman at KTH, Stockholm, 1999.
22. Ozbek · Vacuum · 2004 · 73 · 64310.1016/j.vacuum.2003.12.083 ↗
23. Kulkarni · Met. Powder Rep. · 1990 · 45 · 62910.1016/0026-0657(90)90594-7 ↗
24. ASM Specialty Handbook, Stainless Steels, ASM International, Materials Park, Ohio, 1994.
25. Setasuwon · J. Mater. Process. Technol. · 2008 · 196 · 9410.1016/j.jmatprotec.2007.05.009 ↗
26. Song · J. Mater. Process. Technol. · 2006 · 177 · 35210.1016/j.jmatprotec.2006.04.111 ↗
27. London Metal Exchange (December 26th of 2011). Available from: 〈http://www.lme.com〉.