journal article·2021-02

Phase evolution and mechanical properties of an intercritically-annealed Fe–10Ni–7Mn (wt. %) martensitic steel severely deformed by high-pressure torsion

Faezeh Javadzadeh Kalahroudi, Hamidreza Koohdar, Terence G. Langdon, Mahmoud Nili-Ahmadabadi

Publisher page

Abstract

Abstract Experiments were conducted on an Fe–10Ni–7Mn (wt. %) martensitic steel processed by high-pressure torsion (HPT) after intercritical annealing in the dual phase (α+γ) region at 600 °C for 2 h. Microstructural examination and phase analysis using electron backscatter diffraction (EBSD) confirmed that post-HPT processing led to a phase transformation of austenite to α′-martensite (γ→α′ and γ→e→α′) such that after 20 turns of HPT the microstructure included multi-phases of α′-martensite, austenite and e-martensite. The HPT processing also produced a significant reduction in the α′-martensite and austenite grain sizes from initial values of ~3.8 and ~3.9 μm to ~225 and ~60 nm after 20 HPT turns, respectively, while the e-martensite final grain size was ~44 nm. Micro-hardness measurements and tensile testing showed a significant increase in hardness and in the ultimate tensile strength to about 680 Hv and 2235 MPa after 20 turns, respectively. Finally, the fracture surfaces of samples after HPT processing showed a combination of dimples, cracks and shear bands which confirmed a transition in fracture behavior from ductile to a mixture of a ductile and brittle mode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Producing bulk ultrafine-grained materials by severe plastic deformation: ten years later10.1007/s11837-016-1820-6 ↗
2. A review on high-pressure torsion (HPT) from 1935 to 198810.1016/j.msea.2015.11.074 ↗
3. High-pressure torsion–features and applications10.1002/9783527626892.ch9 ↗
4. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
5. Microstructure evolution and enhanced mechanical properties in SUS316LN steel processed by high pressure torsion at room temperature10.1016/j.msea.2017.11.064 ↗
6. Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: a nanomechanical analysis10.1016/j.actamat.2017.08.057 ↗
7. Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion10.1016/j.msea.2016.01.057 ↗
8. Microstructural evolution and phase transformation in twinning-induced plasticity steel induced by high-pressure torsion10.1016/j.actamat.2016.02.045 ↗
9. The development of vacancies during severe plastic deformation10.2320/matertrans.MF201937 ↗
10. Ultrahigh-strength low carbon steel obtained from the martensitic state via high pressure torsion10.1016/j.actamat.2018.12.028 ↗
11. Nanostructured low carbon steels obtained from the martensitic state via severe plastic deformation, precipitation, recovery, and recrystallization10.1002/adem.201800202 ↗
12. High temperature thermal stability of nanocrystalline 316L stainless steel processed by high-pressure torsion10.1016/j.msea.2016.11.066 ↗
13. Superplastic flow in a nanostructured aluminum alloy produced using high-pressure torsion10.1016/j.msea.2008.09.049 ↗
14. An examination of the superplastic characteristics of Al–Mg–Sc alloys after processing10.1557/jmr.2017.286 ↗
15. Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion10.1016/j.msea.2014.12.056 ↗
16. Effect of high-pressure torsion processing and annealing on hydrogen embrittlement of type 304 metastable Austenitic stainless steel10.1007/s11661-010-0394-0 ↗
17. Phase transformation in Fe–Mn–C alloys by severe plastic deformation under high pressure10.1016/j.matlet.2016.08.113 ↗
18. Martensitic phase transformation and deformation behavior of Fe-Mn-C-Al twinning-induced plasticity steel during high-pressure torsion10.1002/adem.201300488 ↗
19. High-pressure torsion-induced phase transformations and grain refinement in Al/Ti composites10.1007/s10853-017-1331-z ↗
20. High-pressure torsion deformation induced phase transformations and formations: new material combinations and advanced properties10.2320/matertrans.MF201930 ↗
21. Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg10.1038/s41598-019-53614-3 ↗
22. Fabrication and characterization of nanostructured immiscible Cu–Ta alloys processed by high-pressure torsion10.1016/j.jallcom.2020.155007 ↗
23. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
24. A comparison of microstructures and mechanical properties in a Cu–Zr alloy processed using different SPD techniques10.1007/s10853-012-7072-0 ↗
25. Transmission electron microscopy study on the grain boundary precipitation of an Fe-Ni-Mn maraging steel10.1007/s11661-007-9407-z ↗
26. Effect of severe plastic deformation on mechanical properties of Fe-Ni-Mn high strength steel10.4028/www.scientific.net/AMR.83-86.16 ↗
27. Investigating on the reverse transformation of martensite to austenite and pseudoelastic behavior in ultrafine-grained Fe-10Ni-7Mn (wt %) steel processed by heavy cold rolling10.4028/www.scientific.net/AMR.829.25 ↗
28. Strain-induced martensite to austenite reverse transformation in an ultrafine-grained Fe–Ni–Mn martensitic steel10.1080/14786435.2014.886785 ↗
29. Observation of pseudoelasticity in a cold rolled Fe–Ni–Mn martensitic steel10.1016/j.msea.2016.01.113 ↗
30. Microstructure and mechanical behavior of martensitic steel severely deformed by the novel technique of repetitive corrugation and straightening by rolling10.1016/j.msea.2012.04.073 ↗
31. On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion10.1016/j.msea.2019.02.002 ↗
32. On the stability of reversely formed austenite and related mechanism of transformation in an Fe-Ni-Mn martensitic steel aided by electron backscattering diffraction and atom probe tomography10.1007/s11661-017-4288-2 ↗
33. Development of pseudoelasticity in Fe–10Ni–7Mn (wt%) high strength martensitic steel by intercritical heat treatment and subsequent ageing10.1016/j.msea.2014.10.049 ↗
34. Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion10.1016/j.actamat.2012.02.027 ↗
35. Microstructural evaluation of austenite reversion during intercritical annealing of Fe–Ni–Mn martensitic steel10.1016/j.jallcom.2012.02.015 ↗
36. Evolution of microstructure, phase composition and hardness in 316L stainless steel processed by high-pressure torsion10.4028/www.scientific.net/MSF.879.502 ↗
37. Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel10.1007/s11661-006-0130-y ↗
38. Ductility enhancement in ultrafine-grained Fe–Ni–Mn martensitic steel by stress-induced reverse transformation10.1016/j.msea.2010.08.028 ↗
39. Investigation on the nucleation mechanism of deformation-induced martensite in an austenitic stainless steel under severe plastic deformation10.1557/jmr.2007.0094 ↗
40. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part II. Microstructural study10.1007/BF02644428 ↗
41. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
42. Microstructures, strengthening mechanisms and fracture behavior of Cu–Ag alloys processed by high-pressure torsion10.1016/j.actamat.2011.09.058 ↗
43. Microstructural evolution and microhardness in a low carbon steel processed by high-pressure torsion10.1016/j.jmrt.2014.09.004 ↗
44. An investigation of hardness homogeneity throughout disks processed by high-pressure torsion10.1016/j.actamat.2010.09.034 ↗
45. Microstructural evolution and strengthening of selective laser melted 316L stainless steel processed by high-pressure torsion10.1016/j.matchar.2019.110012 ↗
46. Strain gradient plasticity modelling of high-pressure torsion10.1016/j.jmps.2007.10.004 ↗
47. An investigation of flow patterns and hardness distributions using different anvil alignments in high-pressure torsion10.1007/s10853-012-7015-9 ↗
48. An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion10.1007/s10853-014-8015-8 ↗
49. On the heterogeneity of local shear strain induced by high‐pressure torsion10.1002/adem.201900477 ↗
50. Influence of anvil alignment on shearing patterns in high‐pressure torsion10.1002/adem.201200363 ↗
51. Evolution of mechanical properties and microstructures with equivalent strain in pure Fe processed by high pressure torsion10.2320/matertrans.MD200812 ↗
52. Microstructure, properties, and failure characteristics of medium-carbon steel subjected to severe plastic deformation10.1088/1757-899X/63/1/012056 ↗
53. Effect of large shear deformations on the fracture behavior of a fully pearlitic steel10.1007/s11661-010-0541-7 ↗
54. Fatigue behavior of ultrafine-grained medium carbon steel with different carbide morphologies processed by high pressure torsion10.3390/met5020891 ↗