Elasto-viscoplastic tensile behavior of as-forged Ti-1023 alloy: Experiments and micromechanical modeling
Source abstract
Abstract
Abstract This works focused on the mechanical behavior of an ‘as-forged’ Ti-1023 alloy used in airframe forging applications. Its microstructure, characterized by SEM and EBSD, was composed by 15% of primary αp nodules (2–5 μm in size) embedded in millimeter long β grains partially fragmented into equiaxed β subgrains of 5–10 μm. Further neutron diffraction analysis indicated an almost random β texture. Tensile tests at different strain rates were performed. A very low strain rate sensitivity was observed. The contribution of each phase to the overall mechanical behavior was numerically investigated by a two-phase elasto-viscoplastic self-consistent (EVPSC) model with affine-type linearization. Internal stresses arising from elastic and plastic strain incompatibilities were analyzed. Throughout the mechanical loading, {100}β oriented grains were more deformed than {111}β grains and all the α nodules. The onset of plasticity occurred sequentially in the β phase, initially in {110}β grains followed by {111}β and then {100}β ones. The effect of the crystallographic texture on slip activity was also studied through simulations made with a synthetic rotated cube β texture, typical of β-working, while considering α textures in Burgers Orientation Relationship (BOR) with the β phase or being random.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Advanced microtexture analysis of A Ti 10-2-3 product for better understanding of local variations in mechanical behavior
2. In situ neutron measurements and modelling of the intergranular strains in the near-β titanium alloy Ti-β21S10.1016/j.actamat.2016.02.065 ↗
3. Micromechanical modeling of the effect of elastic and plastic anisotropies on the mechanical behavior of β-Ti alloys10.1016/j.ijplas.2018.05.010 ↗
4. Micromechanical modeling of the elasto-viscoplastic behavior and incompatibility stresses of β-Ti alloys10.3390/ma11071227 ↗
5. Relation of the c′ elastic modulus to stability of b.c.c. transition metals10.1016/0001-6160(70)90033-7 ↗
6. Elastic constants of Ti–40 at.% Nb at 298 °K10.1063/1.1662365 ↗
7. Phonon dispersion of the bcc phase of group-IV metals. I. bcc titanium10.1103/PhysRevB.43.10933 ↗
8. Elastic constants of body-centered-cubic titanium monocrystals10.1063/1.1688445 ↗
9. Determination of single-crystal elasticity constants in a cubic phase within a multiphase alloy: X-ray diffraction measurements and inverse-scale transition modelling10.1107/S0021889804023441 ↗
10. Determining Ti-17 β-phase single-crystal elasticity constants through X-ray diffraction and inverse scale transition model10.4028/www.scientific.net/MSF.681.97 ↗
11. Micromechanics of Ti–10V–2Fe–3Al: in situ synchrotron characterisation and modelling10.1016/j.actamat.2007.08.049 ↗
12. Peculiar elastic behavior of Ti–Nb–Ta–Zr single crystals10.1016/j.actamat.2008.02.017 ↗
13. Determination of elastic constants of generally anisotropic inclined lamellar structure using line-focus acoustic microscopy10.1121/1.3245032 ↗
14. Martin · 2012
15. The effect of athermal and isothermal ω phase particles on elasticity of β-Ti single crystals10.1016/j.actamat.2016.03.033 ↗
16. Elasticity and anelasticity of metals.10.1021/j150474a017 ↗
17. Influence of β anisotropy on deformation processes operating in Ti-5Al-5Mo-5V-3Cr at room temperature10.1016/j.actamat.2017.09.023 ↗
18. Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales10.1016/j.actamat.2008.04.036 ↗
19. Stress partitioning in a near-β Titanium alloy induced by elastic and plastic phase anisotropies: experimental and modeling
20. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys10.1016/S0921-5093(97)00778-8 ↗
21. An overview of the thermomechanical processing of α/β titanium alloys: current status and future research opportunities10.1007/s11661-020-05625-3 ↗
22. Investigation of the α- and β- texture evolution of hot rolled Ti-64 products10.1016/S0921-5093(96)10388-9 ↗
23. Characterizing and modeling the precursors to coarse grain formation during beta-annealing of Ti-6 Al-4V
24. Understanding the β-phase texture development in Ti-6Al-4V during compression in the α+β regimes
25. An affine formulation for the self-consistent modeling of elasto-viscoplastic heterogeneous materials based on the translated field method10.1016/j.ijplas.2014.08.011 ↗
26. Micromechanical modeling of hardening mechanisms in commercially pure α-titanium in tensile condition10.1016/j.ijplas.2015.09.008 ↗
27. Formation and reversion of stress induced martensite in Ti-10V-2Fe-3Al10.1016/0001-6160(82)90137-7 ↗
28. Effect of β grain size on stress induced martensitic transformation in β solution treated Ti–10V–2Fe–3Al alloy10.1016/j.scriptamat.2005.03.039 ↗
29. Strain rate effects on tensile deformation behaviors of Ti-10V-2Fe-3Al alloy undergoing stress-induced martensitic transformation10.1016/j.msea.2017.10.057 ↗
30. Influence of α morphology and volume fraction on the stress-induced martensitic transformation in Ti–10V–2Fe–3Al10.1016/j.msea.2011.03.107 ↗
31. Settefrati · 2012
32. Single crystal modeling for structural calculations: Part 1—model presentation10.1115/1.2903374 ↗
33. Single crystal modeling for structural calculations: Part 2—finite element implementation10.1115/1.2903375 ↗
34. Morawiec · 2004
35. Clément · 2010
36. Hearmon · 1984
37. Slip planes in bcc transition metals10.1179/1743280412Y.0000000015 ↗
38. In situ TEM study of dislocation slip in a metastable β titanium alloy10.1016/j.scriptamat.2011.11.036 ↗
39. Determination of Ti-6242 α and β slip properties using micro-pillar test and computational crystal plasticity10.1016/j.jmps.2016.06.007 ↗
40. Slip transfer across phase boundaries in dual phase titanium alloys and the effect on strain rate sensitivity10.1016/j.ijplas.2018.01.011 ↗
41. The effect of aluminium on twinning in binary alpha-titanium10.1016/j.actamat.2015.09.048 ↗
42. Duval · 2013
43. Beausir · 2018
44. Preface to the English edition
45. Crystallographic variant selection in Ti–6Al–4V10.1016/j.actamat.2004.07.034 ↗