Creep behavior of solid solutioned and annealed Al-7075 alloy processed by equal channel angular pressing
Source abstract
Abstract
Abstract Effect of equal channel angular pressing ECAP process on creep properties of solid solutioned and annealed Al-7075 alloy was investigated at different temperatures and applied stresses. The microstructures of treated alloys before ECAP process were analyzed via transmission electron microscopy (TEM) and electron back scatter diffraction (EBSD). Mechanical properties of ECAPed alloy were also characterized. The fracture surface of samples was also observed by scanning electron microscopy (SEM). Subsequently, the creep mechanisms at different temperatures and stresses were discussed. The results showed that applying the initial pass of ECAP can effectively improve the mechanical properties and creep resistance of Al-7075 alloys due to impeding the dislocations movement as a result of dislocation density growth. However, applying multi passes of ECAP on annealed Al-7075 alloy did not have a positive effect on creep strength. Increasing the fraction of HAGBs and grain refinement of multi-pass annealed Al-7075 ECAPed alloy deteriorate the creep characteristic. The maximum creep rate was achieved for annealed sample after 1 pass of ECAP at 503 K under 70 MPa. Furthermore, according to different values of stress exponent, n, creep mechanism of treated samples altered. Dislocation creep as a dominant creep mechanism of annealed Al-7075 ECAPed alloy at both temperatures (503,543 K) was not altered after initial pass of ECAP; however it was replaced by grain boundary sliding after multi passes of process. Core creep mechanism of solid solutioned sample was also changed from Coble diffusion creep to viscos glide dislocation after one pass of ECAP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Macroskopicheskaya fizika plasticheckoy deformatsii
2. On the waves of plastic flow localization in pure metals and alloys10.1002/andp.20075190405 ↗
3. Effect of severe plastic deformation on structure and properties of Al-Sc-Ta and Al-Sc-Ti alloys10.1186/s11671-017-1995-y ↗
4. modes and processes of severe plastic deformation (SPD)10.3390/ma11071175 ↗
5. Development of mechanical properties by severe plastic deformation methods
6. Creep study of mechanisms involved in low-temperature superplasticity of UFG Ti-6Al-4V processed by SPD10.1016/j.matchar.2016.04.007 ↗
7. xu · 2005
8. Blum · 2011
9. Superior high creep resistance of in situ nano-sized TiC(x)/Al-Cu-Mg composite10.1038/s41598-017-04816-0 ↗
10. Effect of friction stir process parameters on the mechanical properties of 5005-H34 and 7075-T651 aluminium alloys10.1016/j.msea.2019.02.065 ↗
11. Microstructure, mechanical and corrosion behavior of high strength AA7075 aluminium alloy friction stir welds – effect of post weld heat treatment10.1016/j.dt.2015.04.003 ↗
12. Friction stir processing of 7075 Al alloy and subsequent aging treatment10.1016/S1003-6326(15)63910-3 ↗
13. Ilieva · 2016
14. Effect of severe plastic deformation on mechanical properties and microstructure in 7075 aluminum alloy10.2464/jilm.64.241 ↗
15. Effects of pre-treatments on precipitate microstructures and creep-rupture behavior of an Al–Zn–Mg–Cu alloy10.1557/jmr.2016.144 ↗
16. Robinson · 2003
17. Fatigue behavior of AA7075 aluminium alloy severely deformed by equal channel angular pressing10.1016/j.jallcom.2018.05.085 ↗
18. Effect of equal channel angular pressing on the mechanical and tribological behavior of Al-Zn-Mg-Cu alloy10.1016/j.matchar.2018.03.045 ↗
19. Microstructure and mechanical properties of Al-7075 alloy processed by equal channel angular pressing combined with aging treatment10.1016/j.matdes.2014.01.008 ↗
20. Microstructure, texture, electrical and mechanical properties of AA-6063 processed by multi directional forging10.3390/ma11122419 ↗
21. Creep in ultrafine grained aluminium10.1016/j.msea.2004.01.111 ↗
22. Sklenička · 2005 · 83
23. Creep processes in pure aluminium processed by equal-channel angular pressing10.1016/j.msea.2005.08.099 ↗
24. Sklenička · 2011 · 897
25. Dvořák · 2011 · 821
26. Creep properties of aluminium processed by ECAP10.4149/km_2016_6_441 ↗
27. Sklenička · 2007 · 2904
28. He · 2016
29. Dvorak · 2014
30. Effect of ECAP temperature on microstructure and mechanical properties of Al–Zn–Mg–Cu alloy10.1016/j.pnsc.2016.03.003 ↗
31. Effect of equal channel angular pressing on aging treatment of Al-7075 alloy10.1016/j.pnsc.2015.03.005 ↗
32. Microstructure and texture evolution of Al-7075 alloy processed by equal channel angular pressing10.1016/S1003-6326(15)63735-9 ↗
33. Effect of severe plastic deformation on the structure and mechanical properties of Al-Cu-Mg alloy
34. Hashimoto · 2006 · 967
35. Effect of SPD processing on the structure and properties of Al–Mg alloy10.15199/28.2018.1.1 ↗
36. Dynamic strain aging behavior of an ultra-fine grained Al-Mg alloy (AA5052) processed via classical constrained groove pressing10.1016/j.jmrt.2018.04.016 ↗
37. Influence of severe plastic deformation on dynamic strain aging of ultrafine grained Al–Mg alloys10.1016/j.actamat.2014.05.004 ↗
38. Microstructural evolution in an aluminum solid solution alloy processed by ECAP10.1016/j.msea.2011.04.017 ↗
39. Crack growth in ultrafine-grained AA6063 produced by equal-channel angular pressing10.1007/s10853-008-2725-8 ↗
40. Kassner · 2015
41. Effect of grain refinement by ECAP on creep of pure Cu10.1016/j.msea.2013.10.022 ↗
42. The effect of predeformation on the creep and stress rupture of an oxide dispersion strengthened mechanical alloy10.1007/BF02655090 ↗
43. Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures10.1016/j.actamat.2009.07.030 ↗
44. Effect of subgrain structure on the creep strength of alloy 120710.1134/S0031918X09010128 ↗
45. Brandon · 1969
46. Yousefiani · 2012
47. Characterization of creep properties and creep textures in pure aluminum processed by equal-channel angular pressing10.1016/j.actamat.2008.01.023 ↗
48. Effect of Mg addition on the creep and yield behavior of an Al–Sc alloy10.1016/S1359-6454(03)00288-X ↗
49. Dislocation creep accommodated by grain boundary sliding in dunite10.1007/s12583-010-0113-1 ↗
50. The effect of ultrafine-grained microstructure on creep behaviour of 9% Cr steel10.3390/ma11050787 ↗
51. Shahbeigi · 2016
52. Stress-level-dependency and bimodal precipitation behaviors during creep ageing of Al-Cu alloy: experiments and modeling10.1016/j.ijplas.2018.07.001 ↗
53. Effect of friction hardening on the surface mechanical properties and tribological behavior of biocompatible Ti-6Al-4V alloy10.1016/j.jmapro.2017.12.016 ↗