Quaternary alloying of copper with Ti50Ni25Pd25 high temperature shape memory alloys
Source abstract
Abstract
Abstract High temperature shape memory alloys with four different compositions i.e. Ti50Ni25-xPd25Cux (x = 0, 5, 10, 15 at.%) were developed, characterized and tested for mechanical and shape memory properties. For simplicity, the alloys were named as 0Cu, 5Cu, 10Cu and 15Cu alloys depending upon the concentration of Cu. Addition of Cu in place of Ni by 5%, 10% and 15% resulted in the improvement of transformation temperatures and thermal hysteresis. Martensite start temperatures increased by 9%, 19% and 42% whereas thermal hysteres decreased by 6%, 8% and 35% respectively. The mechanical properties of 5Cu, 10Cu and 15Cu alloys also improved as compared to 0Cu alloy. The yield and fracture stresses increased by 11%, 19%, 26% and 6%, 10%, 12% respectively in martensite phase. Similarly in austenite phase the same stresses increased by14%, 23%, 28% and 3%, 7%, 8% respectively. At the same time, the hardness of quaternary alloys also improved by 3%, 4% and 7%. The shape memory properties enhanced up to addition of 10% Cu and then slightly decreased at 15%. The strain recovery of 5Cu, 10Cu and 15Cu increased by 2%, 8% and 6%, whereas the irrecoverable strain decreased by 23%, 27% and 23%, respectively. Similarly the work output of quaternary alloys improved by 2%, 8% and 6% respectively as compared to 0Cu alloy. The overall results suggested that by quaternary alloying of Cu in place of Ni enhanced the phase transformation temperatures, improved the mechanical properties in terms of yield stress and fracture stress. Moreover, the shape memory properties like recovered strain, irrecoverable strain and work output improved by addition of Cu up to 10% and then slightly decreased by alloying of Cu at 15%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Improvement in the shape memory response of Ti50.5Ni24.5Pd25 high-temperature shape memory alloy with scandium microalloying10.1007/s11661-010-0245-z ↗
2. Shape memory characteristics of Ti49.5Ni25Pd25Sc0.5 high-temperature shape memory alloy after severe plastic deformation10.1016/j.actamat.2011.04.009 ↗
3. Characterization of ternary NiTiPd high-temperature shape-memory alloys under load-biased thermal cycling10.1007/s11661-010-0365-5 ↗
4. Role of severe plastic deformation on the cyclic reversibility of a Ti50.3Ni33.7Pd16 high temperature shape memory alloy10.1016/j.actamat.2010.08.003 ↗
5. Influence of crystallographic compatibility on residual strain of TiNi based shape memory alloys during thermo-mechanical cycling10.1016/j.msea.2013.02.035 ↗
6. Development of a numerical model for high-temperature shape memory alloys10.1088/0964-1726/16/6/011 ↗
7. Development, characterization, and design considerations of Ni19.5Ti50.5Pd25Pt5 hightemperature shape memory alloy helical actuators10.1177/1045389X09347018 ↗
8. Recovery and recrystallization processes in Ti–Pd–Ni high-temperature shape memory alloys10.1016/S1359-6454(96)00267-4 ↗
9. Work output of the two-way shape memory effect in Ti50.5Ni24.5Pd25 high-temperature shape memory alloy10.1016/j.scriptamat.2011.08.006 ↗
10. High temperature shape memory alloys10.1179/095066010X12646898728363 ↗
11. Cold workability and shape memory properties of novel Ti–Ni–Hf–Nb high-temperature shape memory alloys10.1016/j.scriptamat.2011.07.049 ↗
12. Development of shape memory alloys10.2355/isijinternational.29.353 ↗
13. The shape memory effect in a Ti50Pd50 alloy10.1016/0956-716X(93)90138-I ↗
14. Formation of nanoscaled precipitates and their effects on the high-temperature shape-memory characteristics of a Ti50Ni15Pd25Cu10 alloy10.1016/j.actamat.2012.07.032 ↗
15. Effects of boron addition on microstructure and mechanical properties of Ti–Td–Ni high-temperature shape memory alloys10.1016/S0167-577X(98)00009-3 ↗
16. Microstructure and transformation behaviour of Ni75XTiXPd25 high temperature shape memory alloys
17. Ductilization of Ti–Ni–Pd shape memory alloys with boron additions10.1016/0956-716X(93)90556-8 ↗
18. Improvement of shape memory characteristics by precipitation-hardening of Ti–Pd–Ni alloys10.1016/S0167-577X(97)00134-1 ↗
19. Effect of aging on the microstructure and shape memory effect of a hot-rolled NiTiHf alloy10.1007/s11665-011-9885-4 ↗
20. Effect of cold rolling ratio on the nano scale precipitation behavior of TiNiPdCu based high temperature shape memory alloys10.1016/j.jallcom.2014.02.067 ↗
21. Improvement of a Ti50Pd30Ni20 high temperature shape memory alloy by thermomechanical treatments10.1016/0956-716X(94)90271-2 ↗
22. A method to enhance cyclic reversibility of NiTiHf high temperature shape memory alloys10.1016/j.scriptamat.2006.02.029 ↗
23. Effect of severe ausforming via equal channel angular extrusion on the shape memory response of a NiTi alloy10.1016/j.jnucmat.2006.12.007 ↗
24. Superelastic cycling and room temperature recovery of Ti74Nb26 shape memory alloy10.1016/j.actamat.2009.12.009 ↗
25. Effect of Cu addition on the high temperature shape memory properties of Ti50Ni25Pd25 alloy10.1016/j.jallcom.2011.12.116 ↗
26. Rehman · J. Mater.: Design and Application · 2019 · 233 · 800
27. Mercier · Metall. Mater. Trans. A · 1979 · 10 · 38710.1007/BF02658353 ↗
28. Suburi · 1998
29. Otsuka · Prog. Mater. Sci. · 2005 · 50 · 51110.1016/j.pmatsci.2004.10.001 ↗
30. Karaca · Scr. Mater. · 2012 · 67 · 72810.1016/j.scriptamat.2012.06.028 ↗