Screening of heritage data for improving toughness of creep-resistant martensitic steels
Source abstract
Abstract
Abstract Data science techniques were used to quantify the effect of alloying additions on the tensile behavior of martensitic steels. The effort was undertaken to exploit the heritage data to establish the next experimental design space for the class of 9–12 wt% Cr steels for the application of turbine rotors with an operating temperature of 650 ∘C and above. Linear, lasso, and multivariate multiple regression models were utilized to identify which alloying elements contribute towards strength and ductility. Visualization techniques such as t-distributed stochastic neighbor embedding and pair-wire element specific comparisons were utilized to explore information gaps that exist within the data. The study found that tantalum, recently added to improve the creep rupture lifetime, does not show any effect on tensile properties. All combined, the results suggest that the low tempering temperature has compensated for the low alloying additions in the past, therefore, new experiments are needed to isolate the effects of tempering temperature from those of individual elements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Current status of the US DOE/OCDO A-USC materials technology research and development program
2. Progress in creep-resistant steels for high efficiency coal-fired power plants10.1115/1.4032372 ↗
3. Viswanathan · 1999
4. Strengthening mechanisms of creep resistant tempered martensitic steel10.2355/isijinternational.41.641 ↗
5. Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants10.1088/1468-6996/9/1/013002 ↗
6. In situ characterization of Grade 92 steel during tensile deformation using concurrent high energy X-ray diffraction and small angle X-ray scattering10.1016/j.jnucmat.2013.04.063 ↗
7. 2008
8. Investigation of deformation and microstructural evolution in Grade 91 ferritic–martensitic steel by in situ high-energy X-rays10.1016/j.actamat.2013.10.003 ↗
9. Fundamentals of the heat treating of steel
10. The nucleation and growth of voids at carbides in 9 Cr-1 Mo steel10.1016/0001-6160(86)90019-2 ↗
11. Dislocation evolution during tensile deformation in ferritic–martensitic steels revealed by high-energy X-rays10.1016/j.actamat.2014.05.026 ↗
12. The limits of strength and toughness in steel10.2355/isijinternational.41.599 ↗
13. The microstructure and mechanical properties of T91 steel processed by ECAP at room temperature10.1016/j.jnucmat.2012.12.009 ↗
14. A roadmap for tailoring the strength and ductility of ferritic/martensitic T91 steel via thermo-mechanical treatment10.1016/j.actamat.2016.04.031 ↗
15. Enhancement effect of inter-pass annealing during equal channel angular pressing on grain refinement and ductility of 9cr1mo steel10.1016/j.msea.2016.04.098 ↗
16. Overcoming the strength–ductility trade-off via the formation of a thermally stable and plastically unstable austenitic phase in cold-worked steel10.1016/j.msea.2018.02.075 ↗
17. A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale beta-NiAl and Laves phase precipitates10.1016/j.actamat.2018.02.044 ↗
18. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
19. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
20. NIMS creep data sheet (JIS SUS 403-B, 12cr, bar)
21. NIMS creep data sheet (JIS STBA 26, 9cr-1mo, tube)
22. NIMS creep data sheet (1cr-0.5mo-0.25v and 12cr-1mo-1w-0.25v, bolting material)
23. NIMS creep data sheet (JIS SUH 616-B, 12cr-1mo-1w-0.3v, bar)
24. NIMS creep data sheet (KA-STBA 27, 9cr-2mo, tube)
25. NIMS creep data sheet
26. NIMS creep data sheet (KA-SUS 410 J3, 12cr-2w-0.4mo-1cu-Nb-V)
27. NIMS Creep Data Sheet (KA-SUS 410j3 DTB, 12cr-2w-0.4mo-1cu-Nb-V (Tube)), Tech. Rep. 52A, NIMS, Japan (2013).
28. NIMS creep data sheet (9cr-1mo-V-Nb)
29. Visualizing Data using t-SNE
30. History of power plants and progress in heat resistant steels10.2355/isijinternational.41.612 ↗
31. Accelerating t-SNE using tree-based algorithms
32. R Core Team · 2017
33. Krijthe · 2015
34. A. K. Verma, J. A. Hawk, L. S. Bruckman, R. H. French, V. Romanov, J. L. W. Carter, Mapping Multivariate Influence of Alloying Elements on Creep Behavior for Design of New Martensitic Steels, Metall and Mat Trans Adoi:10.1007/s11661-019-05234-9. URL https://doi.org/10.1007/s11661-019-05234-9.10.1007/s11661-019-05234-9 ↗
35. segmented: an r package to fit regression models with broken-line relationships
36. Estimating regression models with unknown break-points10.1002/sim.1545 ↗
37. 2017
38. A branch and bound algorithm for feature subset selection10.1109/TC.1977.1674939 ↗
39. Hastie · 2009
40. ridge regression: biased estimation for nonorthogonal problems10.1080/00401706.1970.10488634 ↗
41. Regression shrinkage and selection via the lasso10.1111/j.2517-6161.1996.tb02080.x ↗
42. Regularization paths for generalized linear models via coordinate descent10.18637/jss.v033.i01 ↗
43. N. Simon, J. Friedman, T. Hastie, R. Tibshirani, Regularization Paths for Cox's Proportional Hazards Model via Coordinate Descent, Journal of Statistical Software 39 (5). doi:10.18637/jss.v039.i05. URL http://www.jstatsoft.org/v39/i05/.10.18637/jss.v039.i05 ↗
44. Pathwise coordinate optimization10.1214/07-AOAS131 ↗
45. Johnson · 2007
46. Predicting multivariate responses in multiple linear regression10.1111/1467-9868.00054 ↗
47. Cheng · 2017
48. A new look at the statistical model identification10.1109/TAC.1974.1100705 ↗
49. Detection of influential observation in linear regression10.1080/00401706.1977.10489493 ↗
50. Dowling · 2012
51. A new equation for the Cr equivalent in 9 to 12 pct Cr steels10.1007/s11661-998-0080-7 ↗
52. Montgomery · 2012
53. Homogenizing advanced alloys: thermodynamic and kinetic simulations followed by experimental results10.1007/s11665-016-2451-3 ↗
54. Chapter 4: mechanical testing: tension test and other basic tests
55. A physically-based high temperature yield strength model for 9cr steels10.1016/j.msea.2018.05.086 ↗
56. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
57. Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant10.1016/S1359-6454(97)00176-6 ↗
58. Effect of solution carbon and nitrogen on the microstructural size and crystallography of lath martensite in Fe–N and Fe–C alloys10.2320/matertrans.MB201503 ↗
59. Effect of tempering temperature on the toughness of 9cr–3w–3co martensitic heat resistant steel10.1016/j.matdes.2013.09.017 ↗
60. Effect of silicon on the steam oxidation resistance of a 9%Cr heat resistant steel10.1023/B:OXID.0000016280.81734.3f ↗
61. Effect of silicon on the oxidation resistance of 9% Cr steels10.1016/S0169-4332(02)01505-2 ↗
62. Intergranularfailure in steel: the role of grain-boundary composition10.1179/imr.1978.23.1.164 ↗
63. Dislocation density within lath martensite in Fe-C and Fe-Ni alloys10.2355/isijinternational.43.1475 ↗
64. Alloy design and creep strength of advanced 9%Cr USC boiler steels containing high concentration of boron10.1179/174892406X173611 ↗
65. Suppression of Type IV fracture and improvement of creep strength of 9cr steel welded joints by boron addition10.1016/j.ijpvp.2006.09.013 ↗
66. Improved utilization of added B in 9cr heat-resistant steels containing W10.2355/isijinternational.42.Suppl_S67 ↗
67. Schick · 1966
68. Influence of aluminium on creep strength of 9–12% Cr steels10.1016/j.msea.2009.07.060 ↗
69. The effect of tantalum on the mechanical properties of a 9cr–2w–0.25v–0.07ta–0.1c steel10.1016/S0022-3115(99)00035-5 ↗
70. Effect of tantalum content on microstructure and tensile properties of CLAM steel10.1016/j.fusengdes.2016.01.016 ↗
71. Improve creep properties of reduced activation steels by controlling precipitation behaviors10.1016/j.msea.2012.03.004 ↗
72. Effect of cobalt on the microstructure of tempered martensitic 9cr steel for ultra-supercritical power plants10.1016/j.msea.2008.04.131 ↗
73. Impurity element effects on the toughness of 9cr-1mo steel10.1016/S0022-3115(86)80091-5 ↗
74. Intergranular fracture stress and phosphorus grain boundary segregation of a Mn-Ni-Mo steel10.1016/S1359-6462(99)00069-X ↗
75. Grain-boundary segregation of phosphorus in low-alloy
76. Multi-objective optimization for materials discovery via adaptive design10.1038/s41598-018-21936-3 ↗