journal article·2019-03Open access

Mechanical characterization of as-cast AA7075/6060 and CuSn6/Cu99.5 compounds using an experimental and numerical push-out test

Thomas Greß, Jens Stahl, Tim Mittler, Lukas Spano, Hui Chen, Noomane Ben Khalifa, Wolfram Volk

Abstract

The present paper describes an experimental method and innovative numerical approach in the mechanical testing of rotationally symmetric, as-cast bilayer compounds using a push-out test. Specimens consisting of AA7075/6060 and CuSn6/Cu99.5 were fabricated by static and semi-continuous compound casting, respectively. Optical and mechanical testing methods showed a cohesive bonding character and a negligibly small transition zone between the joining partners. The shear strength was investigated by using an experimental push-out test. The experiments were reviewed by means of a finite element analysis. Therefore, Johnson-Cock failure parameters were determined for each casting material. Subsequently, a multi-sectional numerical model was built up to simulate the mechanical behavior of an as-cast bimetal sample during push-out testing. Lastly, a numerical parameter study yielded a strong dependency between optimized loads at the interface and the ratio of die clearance and sample thickness as well as the interface position.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Stets · 1998
2. Development of a continuous composite casting process for the production of bilayer aluminium strips10.1016/j.jmatprotec.2014.02.018 ↗
3. Clad strip casting by a twin roll caster
4. Research on continuous core-filling casting forming process of copper-clad aluminum bimetal composite material
5. An investigation into aluminum-aluminum bimetal fabrication by squeeze casting10.1016/j.matdes.2014.11.051 ↗
6. Dissimilar joining of Al/Mg light metals by compound casting process10.1007/s10853-011-5595-4 ↗
7. Experimental investigations on the influence of the thermal conditions during composite casting on the microstructure of Cu-Al bilayer compounds
8. Cast joining of cast iron to aluminium casting matrix10.1179/1743284711Y.0000000010 ↗
9. Metallurgical process analysis and microstructure characterization of the bonding interface of QAl9-4 aluminum bronze and 304 stainless steel composite materials10.1016/j.jmatprotec.2016.07.041 ↗
10. Thermal analysis and production of as-cast Al 7075/6060 bilayer billets
11. Casting methods for the production of rotationally symmetric copper bimetals10.1080/02670836.2018.1479946 ↗
12. Fabrication and processing of metallurgically bonded copper bimetal sheets10.1016/j.jmatprotec.2018.08.008 ↗
13. A grooved in-plane torsion test for the investigation of shear fracture in sheet materials10.1016/j.ijsolstr.2015.03.032 ↗
14. An advanced equipment for single-fibre pull-out test designed to monitor the fracture process10.1016/0010-4361(94)P3628-E ↗
15. ISO 10123: Adhesives – Determination of shear strength of anaerobic adhesives using pin-and-collar specimens. 1990.
16. Shear blanking test of a mechanically bonded aluminum/copper composite using experimental and numerical methods10.1016/j.msea.2014.11.045 ↗
17. Small punch testing for assessing the tensile strength of gradient Al/Ni-SiC composites10.1016/S0167-577X(02)00619-5 ↗
18. Fiber bundle push-out test and image-based finite element simulation for 3D carbon/carbon composites10.1016/j.carbon.2012.02.030 ↗
19. Fiber-push-out study of a copper matrix composite with an engineered interface: experiments and cohesive element simulation10.1016/j.ijsolstr.2009.08.021 ↗
20. Interfacial mechanics of push-out tests: theory and experiments10.1016/S1359-835X(00)00051-8 ↗
21. X. Li, Q. Yang, Z. Liu, Interfacial mechanics of fiber push-out test: nano-indention technique and cohesive element modeling, in: Proceedings of the 13th International Conference of Fracture, China, 2013, pp. 4689–4695.
22. Dynamic fibre push-out test applied to metal-matrix composites
23. Limitations of push-out test in bond strength measurement10.1016/j.joen.2012.11.002 ↗
24. Experimental and numerical investigations of Al/Mg compound specimens under load in an extended temperature range
25. Characterization of the interfacial properties of compound-extruded lightweight profiles using the push-out-technique10.1016/j.msea.2006.03.038 ↗
26. Mechanical testing of steel/aluminium-silicon interfaces by pushout10.1016/j.ijadhadh.2006.09.003 ↗
27. Quadratic stress criterion for initiation of delamination10.1177/002199838802201205 ↗
28. Nadai · 1950 · 1
29. A continuum model for void nucleation by inclusion debonding10.1115/1.3173064 ↗
30. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids10.1016/0022-5096(92)90020-3 ↗
31. Impact-induced delamination of laminated composites: a 2D simulation10.1016/S1359-8368(98)00013-4 ↗
32. Evaluation of six fracture models in high velocity perforation10.1016/j.engfracmech.2006.01.009 ↗
33. G.R. Johnson, W.H. Cook, A constitutive model and data metals subjected to large strains, high strain rates and high temperatures. in: Proceedings of the 7th International Symposium on Ballistics 21, Netherlands, 1983, pp. 541–547.
34. Modeling and simulation of thin sheet blanking using damage and rupture criteria10.3166/ijfp.8.29-47 ↗
35. Burr-free cutting edges by notch-shear cutting10.1016/j.jmatprotec.2017.06.003 ↗
36. ISO 6892-1: Metallic materials - Tensile testing - Part 1: Method of test at room temperature. 2016.
37. Copper hybrid semi-finished products: manufacture of a rotationally symmetric layer bonding using casting technology [Kupfer-Hybridhalbzeuge: gießtechnische Herstellung eines rotationssymmetrischen Schichtverbundes]
38. VDI 2906-2: Quality of cut faces of (sheet) metal parts after cutting, blanking, trimming or piercing; shearing, form of sheared edge and characteristic values [Schnittflächenqualität beim Schneiden, Beschneiden und Lochen von Werkstücken aus Metall; Scherschneiden. 1994.
39. Dassault Systèmes Inc., : Abaqus 6.13 – Analysis User’s Guide, Volume IV: Elements. 2013.