journal article·2019-01

Microstructure and mechanical properties of Ni foam/stainless steel joint brazed using Ni-based alloy

Hoejun Heo, Gyulin Kim, Dae Yeon Kim, Chanhee Moon, Kyung Chun Kim, Keeyoung Jung, Chung-Yun Kang

Publisher page

Abstract

Abstract An open-cell Ni foam and 304 stainless steel (SS304) were brazed using a Ni based-alloy (MBF20) as a metallic glass brazing filler by varying the brazing temperature (1030–1090 °C) and dwell time (0–60 min). Microstructures and mechanical properties of the joints were investigated to determine the best brazing conditions. When the brazing temperature was low and the dwell time was short, Ni foam was partially reacted with the filler metal in the Ni strut providing a good bonding strength. At higher bonding temperature and/or longer dwell time, a large amount of α-Ni and Ni3B phases were developed in the strut as B in the filler metal diffused into Ni strut. The size of Ni3B and its area fraction were increased with increasing temperature and time. In this stage, it was observed that cracks were readily initiated and propagated perpendicular to the tensile direction through interconnected Ni3B intermetallic compound resulting in degradation of fracture loads and % elongation. Based on the results, a set of acceptable dwell temperature-time couples were determined to the required bonding strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Shape Memory Alloy Transformations · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
2. Mechanical behavior of metallic foams10.1146/annurev.matsci.30.1.191 ↗
3. Thermophysical properties of high porosity metal foams10.1016/S0017-9310(01)00220-4 ↗
4. Thermal analysis on metal-foam filled heat exchangers. Part I: metal-foam filled pipes10.1016/j.ijheatmasstransfer.2005.12.012 ↗
5. Microporosity in aluminium foams10.1016/j.actamat.2017.03.039 ↗
6. Micromechanical characterisation of Ni/Al hybrid foams by nano- and microindentation coupled with EBSD10.1016/j.actamat.2015.09.018 ↗
7. On the accumulation of irreversible plastic strain during compression loading of open-pore metallic foams10.1016/j.msea.2018.05.012 ↗
8. Application of metal foam heat exchangers for a high-performance liquefied natural gas regasification system10.1016/j.energy.2015.10.056 ↗
9. Thermal performance of a 10-kW phase-change plate heat exchanger with metal foam filled channels10.1016/j.applthermaleng.2016.01.156 ↗
10. Flow boiling visualization and heat transfer in metal-foam-filled mini tubes – Part I: flow pattern map and experimental data10.1016/j.ijheatmasstransfer.2016.03.043 ↗
11. Effect of ligament hollowness on heat transfer characteristics of open-cell metal foam10.1016/j.ijheatmasstransfer.2016.06.068 ↗
12. Review on thermal transport in high porosity cellular metal foams with open cells10.1016/j.ijheatmasstransfer.2012.03.017 ↗
13. Effect of loading rate on the compressive properties of open-cell metal foams10.1016/j.msea.2013.11.011 ↗
14. Assessing the influence of four bonding methods on the thermal contact resistance of open-cell aluminum foam10.1016/j.ijheatmasstransfer.2012.06.043 ↗
15. Fluxless soldering with surface abrasion for joining metal foams10.1016/j.msea.2012.05.041 ↗
16. Bonding and integration of titanium to graphitic foams for thermal management applications
17. The bonding of nickel foam to Ti–6Al–4V using Ti–Cu–Ni braze alloy10.1016/j.msea.2010.11.077 ↗
18. Joining stainless steel metal foams10.1179/136217104225012210 ↗
19. Frick · 1991
20. Microstructural characteristics in vacuum TLP (Transient Liquid Phase) bonds using a novel iron-based interlayer based on duplex stainless steel base metal alloyed with a melting-point depressant10.1016/j.vacuum.2013.04.025 ↗
21. and XRD analysis of brazing joint for duplex stainless steel using a Ni–Si–B filler metal10.1016/j.matchar.2009.03.004 ↗
22. Brazing stainless steel using a new MBF-series of Ni-Cr-B-Si amorphous brazing foils
23. Brazing with (NiCoCr)–B–Si amorphous brazing filler metals: alloys, processing, joint structure, properties, applications10.1179/136217104225012300 ↗
24. Effects of aging on Sn–1Ag–0.5 Cu solder alloys containing 0.1 wt% and 0.5 wt% Al10.1016/j.jallcom.2013.08.088 ↗
25. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
26. The theory of the aging of precipitation by redemption (Ostwald ripening)
27. Campbell · 2012
28. Crystal growth and properties of trinickel boride, Ni3B10.1016/0022-0248(84)90050-2 ↗
29. Fracture toughness evaluation of ultrafine-grained nickel10.1016/j.scriptamat.2011.02.007 ↗