journal article·2018-11Open access

In-situ synchrotron X-ray study of microstructural evolution during creep deformation in Grade 91 steel

Fallon Laliberte, Meimei Li, Jonathan Almer, Li Liu

Abstract

Abstract Creep deformation mechanism of Grade 91 steel at 650 °C was investigated in-situ via wide-angle X-ray scattering (WAXS). WAXS peak broadening and a modified Williamson-Hall analysis provided information on evolution of dislocation densities in the primary α − Fe phase, while WAXS peak shifts provided lattice strains in the α − Fe matrix, M23C6 and MX precipitates. Load transfer was not evident during in-situ creep deformation, suggesting that precipitates did not significantly strengthen the matrix during creep deformation. Peak broadening results illustrated an increase in average dislocation density during primary stage creep. After onset of secondary creep, there was a decrease in dislocation density, attributed to annihilation and re-ordering of dislocations in the subgrain structure, followed by a relatively constant average dislocation density with increasing strain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Structural materials issues for the next generation reactors
2. Structural materials for Gen-IV reactors: challenges and opportunities10.1016/j.jnucmat.2008.08.044 ↗
3. Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors10.1179/174328005X41140 ↗
4. A new methodology for analysis of creep and creep fracture data for 9-12% chromium steels10.1179/174328008X254349 ↗
5. Structural materials for fission & fusion energy10.1016/S1369-7021(09)70294-9 ↗
6. Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-super critical power plants10.1088/1468-6996/9/1/013002 ↗
7. Materials for ultra-supercritical coal power plants—boiler materials: part 110.1361/105994901770345394 ↗
8. Strengthening mechanisms of creep resistant tempered martensitic steel10.2355/isijinternational.41.641 ↗
9. Recent advances in creep-resistant steels for power plant applications10.1007/BF02706455 ↗
10. Abe · 2008
11. Microstructural degradation of Gr-91 steel during creep under low stress10.1016/j.msea.2011.03.073 ↗
12. Creep deformation behavior of 9Cr1MoVNb (ASME Grade 91) steel10.1016/j.msea.2016.10.112 ↗
13. In-situ characterization of Grade 92 steel during tensile deformation using concurrent high energy X-ray diffraction and small angle X-ray scattering10.1016/j.jnucmat.2013.04.063 ↗
14. Investigation of deformation and microstructural evolution in Grade 91 ferritic-martensitic steel by in situ high energy X-rays10.1016/j.actamat.2013.10.003 ↗
15. X-ray line broadening from filed aluminum and wolfram10.1016/0001-6160(53)90006-6 ↗
16. Choice of collimators for a crystal spectrometer for neutron diffraction10.1016/0369-643X(58)90029-X ↗
17. A profile refinement method for nuclear magnetic structures10.1107/S0021889869006558 ↗
18. X-ray diffraction line broadening due to dislocations in non-cubic crystalline materials. III. Experimental results for plastically deformed zirconium10.1107/S0021889889001585 ↗
19. The effect of dislocation contrast on X-ray line broadening: a new approach line profile analysis10.1063/1.117951 ↗
20. Dislocations and grain size in ball-milled iron powder10.1016/S0965-9773(96)00048-7 ↗
21. Hertzberg · 1996
22. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
23. Microstructure and flow stress of polycrystals and single crystal10.1016/S1359-6454(97)00365-0 ↗
24. Correlation between subgrains and coherently scattering domains10.1154/1.2135313 ↗
25. The theory of dislocation-based crystal plasticity10.1080/01418619908210342 ↗
26. Dislocation evolution during tensile deformation in ferritic-martensitic steels revealed by high-energy X-rays10.1016/j.actamat.2014.05.026 ↗
27. 1969 · 255
28. Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant10.1016/S1359-6454(97)00176-6 ↗
29. Influence of heat treatments on microstructural parameters and mechanical properties of P92 steel10.1179/026708300101506993 ↗
30. Creep behavior and stability of MX precipitates at high temperature in 9Cr-0.5Mo-1.8W-VNb steel10.1016/S0921-5093(01)00973-X ↗
31. Superplasticity in powder metallurgy aluminum alloys and composites10.1016/0956-7151(94)00323-A ↗
32. The creep behavior of discontinuity reinforced metal-matrix composites10.1007/s11837-003-0187-7 ↗
33. Effect of microstructure on elastic property at high temperatures in ferritic heat resistant steels10.1016/j.msea.2004.10.041 ↗
34. Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600°C for more than 100,000 h10.1016/j.msea.2010.03.010 ↗
35. Changes in estimated dislocation density during creep in martensitic heat-resistant steel