journal article·2018-11

Deformation and annealing behaviors of as-cast non-equiatomic high entropy alloy

Jian Tu, Lei Liu, Yuchen Dou, Can Huang, Li Tan, Li Hu, Qi Sun, Zhiming Zhou

Publisher page

Abstract

Abstract The recently developed non-equiatomic high entropy alloy (HEA), Fe80-xMnxCo10Cr10, overcoming the strength-ductility trade-off. Phase stability in Fe80-xMnxCo10Cr10 is reduced via tailoring Mn content, resulting in a single phase or dual-phase microstructure (face-centered cubic (FCC) phase and hexagonal close packed (HCP) phase). In this work, the plastic deformation and annealing behaviors during processing in two as-cast non-equiatomic HEAs with coarse grains, i.e., Fe30Mn50Co10Cr10 with single-phase (FCC) and Fe60Mn20Co10Cr10 with dual-phase (FCC+HCP), are investigated by a combination of electron back-scattered diffraction and transmission electron microscope. Plastic strain of Fe30Mn50Co10Cr10 is mediated by dislocation slip via forming interacting planar arrays of dislocations, { 111 } deformation twins and micro-shear bands. In Fe60Mn20Co10Cr10, it is revealed a synergy of multiple deformation mechanisms, involved dislocation slip and transformation induced plasticity (TRIP, FCC→HCP). More interestingly, it is revealed { 10 1 ¯ 2 } deformation twins and e martensite plates with the special misorientation ( 70.5 ° / 11 2 ¯ 0 > ) in the HCP phase. This work further confirms Mn content can act as a switch for TRIP effect in Fe80-xMnxCo10Cr10 HEA. Upon annealing treatments, profuse annealing twinning boundaries in Fe30Mn50Co10Cr10 and dense boundaries with 70.5 ° / 11 2 ¯ 0 > in Fe60Mn20Co10Cr10 are formed, paving the way for the development of HEA with the superb mechanical performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
2. Science and technology in high-entropy alloys10.1007/s40843-017-9195-8 ↗
3. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
4. A brief review of high-entropy films10.1016/j.matchemphys.2017.07.078 ↗
5. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
6. High-entropy alloys: potential candidates for high-temperature applications - an overview10.1002/adem.201700645 ↗
7. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
8. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
9. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
10. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys10.1016/j.actamat.2013.01.042 ↗
11. In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy10.1016/j.actamat.2018.01.036 ↗
12. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
13. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
14. Strong and ductile non-equiatomic high-entropy alloys: design
15. Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi 2.110.1016/j.msea.2018.03.078 ↗
16. Microstructures and mechanical properties of the non-equiatomic FeMnNiCoCr high entropy alloy processed by differential speed rolling10.1016/j.msea.2018.04.106 ↗
17. Structural characterization of island ε-martensitic plate in cobalt10.1016/j.matchar.2016.07.008 ↗
18. Structural characterization of a special boundary between α plates after martensitic transformation in cobalt10.1016/j.matchar.2015.12.032 ↗
19. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity10.1016/j.actamat.2017.07.023 ↗
20. Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy10.1038/ncomms15719 ↗
21. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
22. The dynamics of a shear band10.1016/j.jmps.2017.12.004 ↗
23. Quantification of the microstructures of high purity nickel subjected to dynamic plastic deformation10.1016/j.actamat.2011.11.035 ↗
24. Dependence of strain rate sensitivity upon deformed microstructures in nanocrystalline Cu10.1016/j.actamat.2010.05.055 ↗
25. Strain-induced microstructure refinement in pure Al below 100 nm in size10.1016/j.actamat.2018.04.014 ↗
26. Christian · 2002 · 992
27. On the {10-12} twinning growth mechanism in hexagonal close-packed metals10.1016/j.matdes.2016.02.002 ↗
28. Critique of mechanisms of formation of deformation, annealing and growth twins: face-centered cubic metals and alloys10.1016/j.scriptamat.2012.09.011 ↗
29. Formation of single and multiple deformation twins in nanocrystalline fcc metals10.1016/j.actamat.2009.04.020 ↗
30. Atomic structures of [1-210] symmetric tilt grain boundaries in hexagonal close packed (hcp) crystals10.1088/0965-0393/20/2/024002 ↗