Effects of aging temperature on microstructure, tensile and creep properties of ring rolled AZ80-Ag alloy
Source abstract
Abstract
Abstract In this study, aging behavior, tensile property and creep performance of the ring rolled AZ80-Ag magnesium alloy at different aging temperatures were systematically investigated. Results show that the microstructure is mainly occupied by discontinuous precipitation (DP) and continuous precipitation (CP) of β-Mg17Al12 after T6 treatment. The peak aging at low temperature (175 °C) results in a larger volume fraction of β precipitation and a lower CP/DP ratio than peak aging at high temperature (250 °C). With raising aging temperature, the tensile strength at ambient temperature reveals a descending tendency, whereas the creep resistance at 120–175 °C under 70–90 MPa exhibits an enhancement. Based on the analysis of creep stress exponent and activation energy values, the dominant creep mechanism of both aged specimens is dislocation creep controlled by competing lattice diffusion and pipe diffusion. Basal and non-basal dislocations can be activated in the creep deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Fabrication of extraordinary high-strength magnesium alloy by hot extrusion10.1016/j.scriptamat.2009.06.003 ↗
2. Magnesium alloy development for automotive applications10.4028/www.scientific.net/MSF.706-709.69 ↗
3. Magnesium: properties–applications–potential10.1016/S0921-5093(00)01351-4 ↗
4. Microstructure and mechanical properties of AZ80 magnesium alloy sheet processed by differential speed rolling10.1016/j.msea.2008.12.052 ↗
5. Effect of aging temperature on precipitation behavior and mechanical properties of extruded AZ80-Ag alloy10.1016/j.jallcom.2015.06.126 ↗
6. The effect of Sn addition on aging behavior and mechanical properties of wrought AZ80 magnesium alloy10.1016/j.jallcom.2014.09.165 ↗
7. The microstructure and impression creep behavior of cast AZ80 magnesium alloy with yttrium additions10.1016/j.matdes.2012.02.036 ↗
8. Effects of hot ring rolling and aging treatment on microstructure and mechanical properties of AZ80-Ag alloy10.1016/j.msea.2015.08.032 ↗
9. Age hardening in a Mg-9 wt% Al alloy10.1016/0001-6160(68)90109-0 ↗
10. Aging behaviour and precipitate morphologies in Mg–7.7Al–0.5Zn–0.3Mn (wt%) alloy10.1016/j.jallcom.2008.08.043 ↗
11. On the competition between continuous and discontinuous precipitations in binary Mg-Al alloys
12. Effects of heat treatment on microstructure and mechanical properties of extruded AZ80 magnesium alloy10.1016/j.matdes.2013.11.072 ↗
13. Effects of aging treatment on microstructure and mechanical property of an AZ80N magnesium alloy10.1016/j.msea.2010.03.015 ↗
14. Microstructure and mechanical properties of AZ80-Ag alloy processed by hot ring rolling10.1016/j.msea.2016.08.023 ↗
15. TEM study of continuous precipitation in Mg–9 wt%Al–1 wt%Zn alloy10.1016/S1359-6454(00)00004-5 ↗
16. Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy10.1016/j.scriptamat.2010.11.052 ↗
17. Creep deformation mechanisms in high-pressure die-cast magnesium-aluminum-base alloys10.1007/s11661-005-0036-0 ↗
18. Effect of heat treatment on microstructure and properties of AZ80 magnesium alloy
19. Cast magnesium alloys for elevated temperature applications
20. Qualitative model for creep of AZ91D magnesium alloy10.1007/s11661-001-0224-5 ↗
21. The effect of gold additions on the ageing behaviour and creep properties of the magnesium alloy AZ91E10.1016/S0921-5093(02)00731-1 ↗
22. Microstructural analysis of the creep resistance of die-cast Mg–4Al–2RE alloy10.1016/j.scriptamat.2007.10.041 ↗
23. Creep and microstructure of magnesium-aluminum-calcium based alloys10.1007/s11661-002-0118-1 ↗
24. Effect of Y and Ca addition on the creep behaviors of AZ61 magnesium alloys10.1016/j.jallcom.2016.06.015 ↗
25. The creep behaviour of rheo-diecast AZ91D (Mg–9Al–1Zn) alloy10.1016/j.msea.2006.07.045 ↗
26. Creep studies of coarse-grained AZ91D magnesium castings10.1016/S0921-5093(98)00668-6 ↗
27. Impression creep characteristics of a cast Mg alloy10.1007/s11661-009-9867-4 ↗
28. Tensile and compressive creep behavior of extruded Mg–10Gd–3Y–0.5Zr (wt%) alloy10.1016/j.matchar.2014.11.006 ↗
29. Dislocation creep behavior in Mg–Al–Zn alloys10.1016/j.msea.2005.06.059 ↗
30. Effect of Ca and rare earth elements on impression creep properties of AZ91 magnesium alloy10.1007/s11661-010-0238-y ↗
31. Impression creep behavior of a cast AZ91 magnesium alloy10.1007/s11661-008-9699-7 ↗
32. On the dynamic mechanical property and deformation mechanism of as-extruded Mg-Sn-Ca alloys under tension10.1016/j.msea.2016.03.125 ↗
33. The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys10.1016/S1359-6454(03)00005-3 ↗
34. The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver10.1080/14786436008238300 ↗