Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites
Source abstract
Abstract
Abstract Friction Stir Processing (FSP) is an attractive manufacturing technique to produce Mg matrix composites since it avoids the problem of excessive reactivity between reinforcement and matrix encountered in liquid-phase processing routes. However, the strength of the interface in C-reinforced Mg matrix composites produced by FSP remains to be assessed. A short fibre composite has been fabricated by FSP a stack of a C-fabric between two Mg-AZ91D alloy sheets. In order to elucidate the interplay between matrix hardness and interface bonding strength, the work investigates the influence of heat treatment on the mechanical properties of the composites. An incremental Mori-Tanaka model is developed to analyse the relative roles of heat treatment and C-fibre reinforcement on the flow strength and ductility of the composites in tension and compression. The mean-field model provides an estimate of the stress at the matrix/fibre interface, from which a simple debonding criterion can be derived. Comparison between model predictions and experimental data indicates that damage in the FSP composites is triggered by early interfacial debonding. Based on Finite Element simulations of a tensile test carried out in-situ in a scanning electron microscope, the critical interfacial stress for debonding was identified to be 435 MPa in simple traction but only 250 MPa when damage is governed by shear. This explains the limited strengthening by C fibres observed in heat treated composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Gupta · 2011
2. Review of recent studies in magnesium matrix composites10.1023/B:JMSC.0000043583.47148.31 ↗
3. Metal matrix composites10.1146/annurev-matsci-070909-104511 ↗
4. The chemical behaviour of carbon fibres in magnesium base Mg-Al alloys10.1023/A:1004745006226 ↗
5. Processing of carbon fibers reinforced Mg matrix composites via pre-infiltration with Al10.1007/s11665-012-0177-4 ↗
6. Interfacial microstructure and mechanical properties of Cf/AZ91D composites with TiO2 and PyC fiber coatings10.1016/j.micron.2017.07.004 ↗
7. Experimental investigation of magnesium-base nanocomposite produced by friciton stir processing: effects of particle types and number of friction stir processing passes10.1007/s11661-011-0698-8 ↗
8. Some physicochemical phenomena observed during fabrication of Mg-C cast composites10.1007/s11665-015-1877-3 ↗
9. Tensile and fatigue behavior of carbon fiber reinforced magnesium composite fabricated by liquid-solid extrusion following vacuum pressure infiltration10.1016/j.jallcom.2017.05.312 ↗
10. Characterization of oxide dispersion strengthened copper based materials developed by friction stir processing10.1016/j.matdes.2014.04.012 ↗
11. MWCNT/AZ31 surface composites fabricated by friction stir processing10.1016/j.msea.2006.01.016 ↗
12. Surface composites by friction stir processing: a review10.1016/j.jmatprotec.2015.04.019 ↗
13. Magnesium based surface metal matrix composites by friction stir processing10.1016/j.jma.2016.02.001 ↗
14. Influence of fibre distribution and grain size on the mechanical behavior of friction stir processed Mg–C composites10.1016/j.matchar.2015.07.010 ↗
15. Effect of Gd content on interfacial microstructures and mechanical properties of Cf/Mg composite10.1016/j.matdes.2014.09.045 ↗
16. Damage mechanism and progressive failure analysis of Cf/Mg composite10.1016/j.msea.2016.04.067 ↗
17. A. Mertens, A. Simar, H.-.M. Montrieux, J. Halleux, F. Delannay, J. Lecomte-Beckers, Friction stir processing of magnesium matrix composites reinforced with carbon fibres: Influence of the matrix characteristics and of the processing parameters on microstructural developments, in: W.J. Poole, K.U. Kainer, (Eds.), Proceedings of the 9th International Conference Mg Alloys and their Applications, 2012, pp. 845–850.
18. Homogenization of two-phase elasto-plastic composite materials and structures: study of tangent operators, cyclic plasticity and numerical algorithms10.1016/S0020-7683(03)00013-1 ↗
19. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
20. The indentation size effect: a critical examination of experimental observations and mechanistic interpretations10.1146/annurev-matsci-070909-104456 ↗
21. TEM study of the continuous precipitation in Mg-9%Al-1%Zn alloy10.1016/S1359-6454(00)00004-5 ↗
22. Friction stir processing technology: a review10.1007/s11661-007-9459-0 ↗
23. Achieving high strength and high ductility in friction-stir processed cast magnesium alloy10.1007/s11661-013-1744-5 ↗
24. Study of β-precipitates and their effect on the directional yield asymmetry of friction stir processed and aged AZ91C alloy10.1016/j.msea.2012.09.095 ↗
25. Enhanced ductility in strongly textured magnesium produced by equal channel angular processing10.1016/j.scriptamat.2003.10.006 ↗
26. Grain size and texture effects on deformation behavior of AZ31 magnesium alloy10.1016/j.msea.2012.08.080 ↗
27. Reducing the tension-compression yield asymmetry in a Mg-8Al-0.5Zn alloy via precipitation10.1016/j.scriptamat.2009.11.024 ↗
28. Effect of precipitate shape on slip and twinning in magnesium alloys10.1016/j.actamat.2010.11.060 ↗
29. Microplasticity-based rationalization of the room temperature yield asymmetry in conventional polycrystalline Mg alloys10.1016/j.actamat.2016.02.023 ↗
30. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
31. A new approach to the application of Mori-Tanaka’s theory in composite materials10.1016/0167-6636(87)90005-6 ↗
32. The determination of the elastic field of an ellipsoidal inclusion, and related problems10.1098/rspa.1957.0133 ↗
33. Elastic behavior of composite materials: theoretical foundations10.1016/S0065-2156(08)70332-6 ↗
34. ABAQUS/Standard, SIMULIA, Providence, RI, 2013.
35. Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression10.1016/j.actamat.2011.10.001 ↗
36. The interaction of twins and precipitates in a Mg-7.7 at% Al alloy10.1080/01418619808239980 ↗
37. Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy10.1016/j.scriptamat.2010.11.052 ↗
38. Microstructure, crystallographic texture and mechanical behaviour of friction stir processed Mg-Zn-Ca-Zr alloy ZKX5010.1016/j.msea.2016.12.125 ↗
39. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature10.1007/s11661-005-0032-4 ↗
40. Twinning behavior and deformation mechanisms of extruded AZ31 Mg alloy10.1016/j.msea.2007.09.058 ↗
41. Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium10.1016/j.actamat.2015.01.032 ↗