Effect of specimen size on small punch creep behavior of high nitrogen ferritic heat-resistant steels
Source abstract
Abstract
Abstract The small punch (SP) creep tests were carried out on different high nitrogen ferritic heat-resistant steels in the temperature range of 650–800 °C, in the load range of 55–400 N, using disc-type specimens measuring ∅8 × 0.5 mm (∅8 mm) and ∅3 × 0.25 mm (∅3 mm). The influence of specimen size on SP creep behavior and on the conversion of SP creep rupture results to conventional uniaxial creep rupture results were investigated. The creep deflection and rupture life of ∅3 mm specimens were much smaller/shorter than those of the ∅8 mm specimens. The experimentally determined SP load-uniaxial stress conversion coefficients to correlate SP and uniaxial creep rupture life were different for the two specimens; 2.05 and 0.49 for ∅8 mm and ∅3 mm specimens, respectively. These observed effects were considered as virtual specimen size effects as these could occur not only due to specimen size but also due to geometrical parameters of the test rig. The conversion coefficients were found to be independent of the type of steels investigated. The conversion coefficients determined from finite element analysis, 2.03 and 0.47 for ∅8 mm and ∅3 mm specimens, respectively, were in close agreement with those obtained from experimental results. Based on the close agreement between the experimental creep rupture life and that predicted using finite element analysis results, it was found that there was no significant actual specimen size effect on the creep rupture life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fire effects on concrete materials · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Evaluation of creep rupture strength of high nitrogen ferritic heat-resistant steels using small punch creep testing technique10.1016/j.msea.2016.08.102 ↗
2. Small punch creep studies for optimization of nitrogen content in 316LN SS for enhanced creep resistance10.1007/s11661-013-2027-x ↗
3. Damage evaluation of a welded joint in a long-term service-exposed boiler by using a small punch creep test10.2355/isijinternational.47.1228 ↗
4. Small punch test method assessment for the determination of the residual creep life of service exposed components: outcomes from an interlaboratory exercise10.1016/S0029-5493(99)00039-4 ↗
5. Creep property measurements of welded joint of reduced-activation ferritic steel by the small punch creep test10.1016/j.msea.2008.04.132 ↗
6. International conference on developments in progressing technology
7. Development of small punch tests for creep property measurement of tungsten-alloyed 9%Cr ferritic steels10.1520/JTE12102J ↗
8. R. Hurst, K. Matocha, Proceedings of Second Conference on Small Sample Test Techniques: Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques, Ostrava, Czech Republic, 2012, pp. 4–18.
9. Application of the CEN (European Committee for Standardization) small punch creep testing code of practice to a representative repair welded P91 pipe10.1016/j.msea.2008.05.058 ↗
10. Small Punch Test Method for Metallic Materials Part 1: A Code of practice for small Punch testing at elevated temperatures, Report No. CEN/WS 21, 2005.
11. On the Monkman-Grant relation for small punch test data10.1016/S0921-5093(01)01975-X ↗
12. Standard for Small Punch Creep Test-Estimation of Residual Life for High Temperature Component, JSMS, Report No. ISBN978-4-901381-38-3, 2012.
13. Development of a small punch testing method to evaluate the creep property of high Cr ferritic steel: part I-Effect of atmosphere on creep deformation behavior10.1016/j.msea.2016.03.100 ↗
14. A study on influence factors of small punch creep test by experimental investigation and finite element analysis10.1016/j.msea.2010.01.010 ↗
15. Deformation and fracture in small punch creep tests, and influence factors on creep rupture life (testing environment and radius of lower die)10.1299/kikaia.77.2046 ↗
16. Effects of geometry and dimension of specimen and rig on small punch creep property10.1007/s11340-016-0250-2 ↗
17. Effect of specimen size and oxygen partial pressure on creep characteristics of Mod. 9Cr-1Mo steel10.2472/jsms.66.86 ↗
18. T. Itoh, Y. Irisawa, M. Sakane, Y. Kitamura, T. Tsurui, M. Fujiwara, T. Kim, Development of miniature creep testing for high temperature materials-verification testing, In: Proceedings of the Third Conference on Small Sample Test Techniques-Determination of Mechanical Properties of Materials by Small Punch and Other Miniature Testing Techniques, Ostrava, Czech Republic, 2012, pp. 283.
19. S. Zhang, Y. Takahashi, M. Sakane, Remaining life evaluation of long-term used Gr.91 using miniature creep specimen, In: Proceedings of the 13th International Conference on Creep and Fracture of Engineering Materials and Structures, CREEP 2015, France.
20. Bend testing for miniature discs10.13182/NT82-A26286 ↗
21. A new post-irradiation mechanical behavior test: the miniature disk bend test10.13182/NT83-A33289 ↗
22. Development of a further miniaturized specimen of 3 mm diameter for TEM disc (∅3 mm) small punch tests10.1016/0022-3115(87)90092-4 ↗
23. S. Komazaki, T. Tokunaga, Y. Kawaji, Small punch creep property of high Cr ferritic steels, In: Proceedings of the 3rd International Conference of SSTT, Austria, 2014, pp. 312–318.
24. S. Komazaki, Y. Ohkawa, M. Yonemura, Effect of ductility on load/stress conversion coefficient of small punch creep test for Ni-base alloys, J-STAGE, 〈http://dx.doi.org/10.2355/tetsutohagane.TETSU-TETSU-2016-033〉.
25. A time temperature relationship for rupture and creep stresses
26. A theory of stretch forming over hemispherical punch heads10.1016/0020-7403(70)90085-8 ↗